Categories
Construction
Explore a wide range of customizable Construction templates and resources tailored for tasks like earthworks, working at heights, risk assessment, and more. Find solutions to optimize your Construction practices and meet industry standards.
Templateby SafetyCultureLandscaping Maintenance Checklist
This digital landscaping maintenance checklist form can be used by commercial property managers and landscaping business owners to ensure the quality of work performed by landscapers. This tool allows managers and owners to effectively assign landscaping maintenance jobs to workers and monitor performance quality. Inspection Template
Downloads: 664Get- Templateby SafetyCulture
Tower Crane Daily Operator Checklist
Use this template to inspect a tower crane before, during and after work shifts. Begin by conducting pre-operation checks by recording work permits issued, evaluate operator's competency and check emergency controls. Next, inspect the components of the crane by capturing photo defects and observe if safety measures were applied. Lastly, assess the post job operation to ensure that the crane is safely unattended. Provide final recommendations during end of shift to improve crane safety.
Downloads: 657Get - Templateby SafetyCulture
COVID 19 Construction Workforce Checklist
As construction works resume, maintaining the health and safety of its workers and workplaces is important during this time. This checklist will help construction industries to reduce the risk of exposure to the coronavirus.
Downloads: 631Get - Templateby SafetyCulture
Job Site Inspection Checklist
Perform this inspection when visiting work sites. Assess regulatory compliance, job site conditions and PPE safety for workers.
Downloads: 596Get - Templateby SafetyCulture
Pump Maintenance Checklist (Station Inspection)
A pump maintenance checklist is a tool used by pump technicians or engineers when conducting pump inspections. Pump inspection checklists guide inspectors during pump inspections to help ensure that the pumps are in good working condition. Inspectors can use this digitized checklist to help prevent unscheduled disruptions by inspecting pump stations.
Downloads: 580Get - Templateby SafetyCulture
Field Level Hazard Assessment Template
A field level hazard assessment template aims to help frontline workers identify and immediately control hazards in designated work areas. Use this digital FLHA template to briefly discuss the tasks to be done during the shift, specify and take photos of the hazards in your work area, indicate how hazards are controlled, update the tasks, hazards, and controls in real-time and validate the assessment with digital signatures.
Downloads: 542Get - Templateby SafetyCulture
OSHA Overhead and Gantry Cranes Checklist
This OSHA overhead and gantry crane checklist converted through SafetyCulture is used to ensure operators comply with mandated safety regulation. Use SafetyCulture to perform a digital inspection that thoroughly checks the crane equipment and its electrical connections. This will also cover testing and maintaining the working condition of all cranes before using it.
Downloads: 470Get - Templateby SafetyCulture
Scope of Work for Construction
This SOW template for construction project management can be used and customized to outline critical details, such as deliverables, tasks, manpower, cost, and timeline for projects. This template enables email notification of task assignments to individuals and securing of electronic signatures for sign offs.
Downloads: 460Get - Templateby SafetyCulture
Operational Readiness Checklist Template (Construction)
This operational readiness checklist for small to medium-sized construction projects can be used by project managers to perform readiness assessments of a facility before start-up or restart. With this customizable digital operational readiness checklist, managers can easily capture critical information and inform key individuals of any problems identified in a facility.
Downloads: 442Get - Templateby SafetyCulture
Daily Construction Log
Use this construction daily log template to identify the day's weather and enter lost time due to precipitation. Name the materials and the quantity received and spent. Enter the number of crew present and name those who may have reported sick for the day and hours worked if they still reported.
Downloads: 414Get - Templateby SafetyCulture
Air Compressor Maintenance - Reciprocating Compressor
Air compressor maintenance checklist is used for the routine preventive inspection of air compressors. It helps engineers and safety officers conduct daily, weekly, monthly, or yearly compressor preventive maintenance to ensure the efficient operation of air compressors.
Downloads: 409Get - Templateby SafetyCulture
Pre-Start: Excavation Safety Checklist
The excavation safety checklist is used prior to all construction site excavations. Protective systems and pre-dig checks are included in this checklist.
Downloads: 408Get - Templateby SafetyCulture
Overhead Crane Monthly Audit
Ratchet and electric chain hoists need to be inspected monthly to ensure better crane performance. Use this template to perform a detailed equipment evaluation for overhead cranes, capture photos of defects and notify persons in-charge for immediate resolution.
Downloads: 384Get - Templateby SafetyCulture
Field Level Hazard Assessment
Use this template to to identify hazards, assess risks and control exposure to them before the tasks for the day begin. The identified controls may require that additional precautions be taken or that certain tasks be prohibited until a safer means to complete the task is made available.
Downloads: 378Get - Templateby SafetyCulture
General Contractor Induction Checklist
Safety induction should be performed even for contract-based projects. Use this general contractor induction template to confirm safe work methods, procedures, and instructions were reviewed by the contractors. Authenticate if site emergency evacuation procedures, incident reporting process, and sub-contractor management processes were discussed to all employees working on the project.
Downloads: 372Get - Templateby SafetyCulture
Site Safety Management Plan
Use this safety management plan for site visits to ensure all safety measures are in place and implemented. With this, you can check if management personnel are carrying out their designated responsibilities, as well as ensure all communication lines are known and all risks are managed efficiently and properly.
Downloads: 358Get - Templateby SafetyCulture
Ladder Safety Checklist
A ladder safety checklist is used to assess if a ladder is suitable for use. Use this checklist to conduct safety checks by testing the ladder's functionality. Ensure that the ladder has gone through proper inspection (before and after use) and identify defects that may cause potential risks such as falls.
Downloads: 355Get - Templateby SafetyCulture
Take 5 Safety Pre-start Construction Site Checklist
This Take 5 Safety template is to take note and raise awareness for construction workers about any hazards and assess risk on the contrsution site
Downloads: 347Get - Templateby SafetyCulture
OSHA Toolbox Talk: Portable Ladder Safety
OSHA toolbox talk: portable ladder safety template can be used to discuss how to identify and avoid hazards while using portable ladders. Use SafetyCulture to confirm that information on safety tips were fully understood by all workers before commencing work. Record any hazards found during the shift to address the issue and provide necessary actions.
Downloads: 333Get - Templateby SafetyCulture
Site Investigation Report Template
A site investigation report template is used by qualified investigators to determine characteristics of the soil in a specified property. It can help support a risk assessment, provide data for the design of remedial works, and benchmark the contamination status of a site. Use this template to specify the site information, characterize soil through testing, and complete the report by providing your overall findings and digital signature.
Downloads: 329Get - Templateby SafetyCulture
Material Inspection Report
A material inspection report form is used by material controllers to properly document the acceptance or rejection of purchased materials through defined characteristics such as nondestructive examination, functional test, and verification of source inspection result. Easily gather the digital signatures of the manufacturing engineer and supplier representative with this paperless material inspection report form and automatically share the report to the quality manager the moment a material inspection is completed.
Downloads: 321Get - Templateby SafetyCulture
Chimney Inspection Checklist
This chimney inspection checklist is used to evaluate the chimney systems and ensure it is safe and operational.
Downloads: 309Get - Templateby SafetyCulture
Fall Protection Site Safety Inspection
Perform this checklist to identify safety measures before, during and after work shifts. Start with a description of the work, take photo of it and list down names of personnel performing the task. Next identify the safety measures which include permits, proper training, safety routes, vicinities and equipment. Then check the harness if it is properly connected and used. Afterwhich, Identify the changes that needs to be implemented and finally, summarize the inspection by providing recommendations of equipment to be replaced or remove from service.
Downloads: 291Get - Templateby SafetyCulture
Scaffolding Checklist
Use this scaffolding checklist to audit scaffold components and assure that no defects were recorded. This will also check proper access to get on and off the scaffold and if "Do Not Use" tag is placed when the scaffold is damaged.
Downloads: 289Get