Skip to content
SafetyCulture
Template

Welding Safety Checklist

by SafetyCulture

Free
1,177

Use this checklist before commencing welding tasks. Start by taking a photo of the work area and check if the operator has undergone proper training, understands instructions, and wears appropriate PPE. Next, evaluate if equipment is in good working condition and the working area is ventilated and free from flammables and obstructions. Inspect if procedures were followed during and after work. End the report by by providing recommendations and an overall safety rating.

About author

Free 1,000+ Workplace Checklists & Templates created by the SafetyCulture team.

You might also like

  • Welding Risk Assessment
    SafetyCulture logo
    Template

    Welding Risk Assessment

    Use this welding risk assessment to identify the hazard associated with welding activities before commencing work. Record risk rating based on the hazards and assess control measures to be used and implemented for safety purposes. Use SafetyCulture to capture photos of the hazard and generate efficient reports on site.

    by SafetyCulture
    273 downloads
    Get
  • Radiation Safety Checklist
    SafetyCulture logo
    Template

    Radiation Safety Checklist

    This template is for checking compliance of safety measures in the workplace. Start by inspecting the availability and the visibility of radiation warnings. Conduct a contamination survey on the area and check if proper protective equipment are worn by the workers. Inspect if electrical devices are in good working condition and are marked with proper caution. Evaluate if operating and emergency procedures are posted for radiation-producing devices to ensure that these equipment has undergone device tests. Complete the inspection by providing recommendations and safety reminders.

    by SafetyCulture
    317 downloads
    Get
  • Housekeeping Checklist (Workplace)
    SafetyCulture logo
    Template

    Housekeeping Checklist (Workplace)

    Use this housekeeping checklist when conducting regular inspections at the workplace. Start the inspection with the description of work and a photo of the workplace. Thoroughly inspect the floors, aisles, and stairways if unobstructed and free from protruding objects. Check if waste disposals and absorbents were disposed of promptly and safely. Evaluate equipment and machinery if properly maintained. Then, check storage area if safe and accessible to all employees. End the inspection by providing recommendations and overall assessments. Use SafetyCulture to conduct digital inspection and generate on the spot report.

    by SafetyCulture
    1115 downloads
    Get
  • Fall Protection Site Safety Inspection
    SafetyCulture logo
    Template

    Fall Protection Site Safety Inspection

    Perform this checklist to identify safety measures before, during and after work shifts. Start with a description of the work, take photo of it and list down names of personnel performing the task. Next identify the safety measures which include permits, proper training, safety routes, vicinities and equipment. Then check the harness if it is properly connected and used. Afterwhich, Identify the changes that needs to be implemented and finally, summarize the inspection by providing recommendations of equipment to be replaced or remove from service.

    by SafetyCulture
    290 downloads
    Get