Categories
Mining
Access mining templates and training courses built for coal operations, site safety audits, and equipment inspections. Help your teams manage incident investigations, vehicle checks, hot work permits, and fatigue risks so you can maintain safety and compliance across every mining site.
Browse Mining
1,228 results- Template
DNM Haul and Dozer Push Shift Log
Use this mining shift log to record production activities for haul operations, dozer push and auxiliary equipment. Capture supervisors, locations, utilization, JSA requirements and site conditions. Log scheduled and unscheduled delays, design compliance, volume impacts, haul and circuit health, speed restrictions, dust and communication issues. Include AHT delays and notes for graders and water carts, including water fill points impacted. Standardize reporting across shifts to improve visibility, reduce downtime and support continuous improvement.
by Danielle Kinniff, from the CommunityDownloads: 10+Get - Template
Planilla de mediciones PDU para mantenimiento menor
Conduct a pre-start for the Ventia Anglo American contract with this checklist. Record safety shares, incidents and hazards, environmental issues, SWI and SLAM reviews, tasks, hazards and controls, toolbox and PPE requirements, general business notes, and handover details. Capture fitness for work, BAC testing results, and signatures to confirm understanding before work begins. Use as a guide and adapt to your site and jurisdiction.
by Garrick Crous, from the CommunityDownloads: 10+Get - Template
Daily Blast Inspection
This daily blast inspection template helps mining teams verify safety and readiness before loading and firing. It covers shift incidents, known hazards, geotechnical reviews, communications compliance, JSA sign-offs, load notifications, and TMP approvals. Inspect bench preparation, lighting, bunds, delineation, and signage. Confirm SSAN equipment fitness, vehicle pre-starts, dust control, and housekeeping. Audit SSAN compounds for security seals and locks, spill cleanup, waste management, signage, vegetation clearance, and potential breaches. Record out-of-service vehicles, downtime, servicing needs, and assess the next available shot for dipping, access, geotechnical hazards, and drill presence.
by Karl Hayward, from the CommunityDownloads: 10+Get - Template
Standard 18 Quarry Pre-Start Inspection Checklist
Use this daily pre-start inspection template for quarry operations in line with Standard 18. Review stockpiles and tips, haul roads, edge protection, lakes and embankments, faces above working areas, dry and wet excavations, and short term tips. Check drainage, bunding, access width, signage, and traffic controls, and note quality issues, hazards, and remedial actions. Includes prompts for lifebuoys, risk assessment for underwater extraction, defects requiring geotechnical notification, and sign off.
by Kevin Meades, from the CommunityDownloads: 10+Get - Template
Yandi CCO Checklist: Unplanned Initiation or Impact
This Yandi CCO checklist supports BHP Risk CCO processes for unplanned initiation or impact in mining and quarry operations. It guides auditors through blast clearance and exclusion zone verification, equipment checks, hot and reactive ground assessment, and misfire management. The template also covers recording requirements, licensing and competency verification, observations, and sign-off to confirm an on-site inspection was performed. Use it to standardize critical risk controls and improve blasting safety compliance.
by Yandi OHP, from the CommunityDownloads: 10+Get - Template
CVM Overburden Excavator Checklist
This overburden excavator checklist helps mining supervisors and crews verify safe, compliant operations across the pit. It covers HSEC checks, work area setup, haul roads and ramps, bench and loading conditions, open edge controls, and dump area standards. It also includes water truck management, lighting plants, in-pit refueling bays, crib hut housekeeping, new work area relocations, and circuit inspection times. Use it to document observations, required controls, and sign off for each shift.
by Kaylene Munro, from the CommunityDownloads: 10+Get - Template
Workshop Area Spot Audit: Hot Work Compliance
Use this spot audit checklist to evaluate workshop area compliance and hot work controls. Verify housekeeping, trip hazards, tool condition, PAT testing, storage of slings, and signage. Check hot work permits, welding screens, LEV or RPE, extinguishers, and removal of flammables. Review grinding practices and PPE, provide feedback, and track corrective actions to improve safety and compliance.
by Scott Denny, from the CommunityDownloads: 10+Get - Template
Komatsu 930E 500hr Mechanical Service Checklist
Perform a complete 500-hour mechanical service on Komatsu 930E haul trucks with a structured checklist that guides technicians through safety sign-on, brake and retarder tests, slow mode and emergency stop verification, steering accumulator bleed-down, PLM strut pressure checks, lubrication and filter changes, cooling and fuel system inspections, hydraulic and brake system checks, wheel motor and hub plug contamination checks, A/C maintenance, fire suppression verification, ladder and handrail inspections, chassis and suspension measurements, and return-to-service steps with RTS tracking, photos, signatures, and supervisor signoff.
by Aaron Moseley, from the CommunityDownloads: 10+Get - Template
Offsite Vehicle Incident Journey Management
Use this Fatal Risk Control Verification checklist to manage offsite vehicle incidents within work hours at GRM. Verify compliance with hours of work, fatigue risk assessments, and approvals by the Site Senior Executive. Inspect roadway maintenance between Moranbah and GRM, review inspection reports, and confirm deficiencies are logged and resolved. Check that journey management plans are created when thresholds are met, controls are implemented, and personnel understand requirements. Document interviews, evidence, and sign-off to ensure safe, compliant travel.
by Samantha Fellows, from the CommunityDownloads: 10+Get - Template
Первичное дробление конвейер CV-101/102 ТО
Ежемесячный регламент ТО для ленточного конвейера CV-101/102 на участке первичного дробления. Чек-лист охватывает требования по технике безопасности, фиксацию места и времени работ, моточасы и подписи исполнителей. Включены визуальные осмотры корпуса, контроль уровня масла в редукторе и дыхательного клапана, проверка утечек, прослушивание и наблюдение за вибрациями, диагностика быстроходной и тихоходной муфт, оценка состояния сальниковых уплотнений, проверка ограничителя обратного хода на шум и перегрев, осмотр роликов на скопление материала и мониторинг высокой вибрации, способной ослаблять крепёж. Формат подходит для ПТО и стационарного оборудования на горнодобывающем производстве.
by Malika Amangeldyyeva, from the CommunityDownloads: 10+Get - Template
LNA BBS Behavior Based Safety Checklist
Apply this LNA BBS Behavior Based Safety checklist to observe and reinforce safe behaviors on site. Capture reactions and positions of people, PPE compliance, tool and equipment condition, procedure awareness and adherence, housekeeping standards, and environmental conditions. Record counts of safe and unsafe acts, add photos and notes, and flag hazards such as lockouts, electrical contact, falls, line-of-fire, and ergonomic risks. Include observer name, date, area, people contacted and observed to track trends and drive continuous improvement in mining operations.
by Russel Fabian, from the CommunityDownloads: 10+Get - Template
Production Dig Unit Supervisor Shift Log
Use this Production Dig Unit Supervisor Shift Log to capture daily mining activities and handovers. Record excavator and shovel IDs, locations, priorities, material type (coal, waste, or both), primary and secondary dumps, and any rate or volume impacts. Log scheduled and unscheduled delays, weather or tarp issues, safety observations, and notes for day and night shifts. Standardize communications between supervisors and improve production planning, compliance, and shift continuity.
by Danielle Kinniff, from the CommunityDownloads: 10+Get - Template
Audit - Equipment Chocks
This audit checklist helps teams verify the presence, type, condition, and correct placement of equipment chocks on heavy vehicles and machinery. Capture site details, date, preparer, location, equipment type, manufacturer, and equipment number. Confirm whether chocks are fitted, identify the chock type, assess if the chocks are the correct specification and in good condition, and attach photo evidence. Use this checklist to strengthen mobile equipment safety, prevent roll-away incidents, document findings, and support corrective actions and compliance across mining operations.
by Angie Winters, from the CommunityDownloads: 10+Get - Template
SSQM Site Safety and Service Audit
This SSQM Site Safety and Service Audit template helps teams manage safety and quality at oil and gas sites, including FRAC operations. It covers employee PPE compliance, equipment readiness, truck and tank staging, spill protection, fueling routines, paperwork accuracy, and communication standards. Use it to document hazards, site conditions, safety meetings, and shift check-ins, and to capture customer satisfaction and weekly service topics. Standardize audits, reduce incidents, and improve field service performance.
by Erik Smith, from the CommunityDownloads: 10+Get - Template
Quality Control Audit Checklist
This quality control audit checklist helps mining teams verify drilling accuracy and site conditions during production. Inspect hole diameters, offsets, dip/dump, casing in downholes, and breakthrough locations. Spot check print vs actual dip, dump, and offsets, confirm azimuth setup, and capture notes on slips, cracks, and geology changes. Include checks for ring line markings and previously drilled holes. Wrap up with general inspections for housekeeping, tools and gear, travelways, mobile equipment, and supervisor/employee sign-off to drive safer, more consistent output.
by Justin Miller, from the CommunityDownloads: 10+Get - Template
NGM Open Stope Audit Checklist
This NGM Open Stope Audit helps underground mining teams assess stope safety and compliance across multiple locations. Inspect top and bottom conditions, verify caution and danger signage placement, check berm presence and minimum heights with required setbacks, confirm concrete barriers, and record sprinkler installation and functionality. Capture photos, note locations, and standardize documentation for safer stope operations.
by Tonya Solis, from the CommunityDownloads: 10+Get - Template
Non-Mineral Waste 3rd-Party Verification Audit
This audit template helps verify third-party non-mineral waste management contractors for compliance and performance. It covers statutory licences and permits, HSE management systems, environmental monitoring, waste tracking and documentation, disposal procedures, pollution controls, visible emissions, and controls for offsite transport and transfer. It also reviews housekeeping, storage, fuel, oil and chemical containment, emergency response readiness, training and competency, community complaints, and safety practices, with findings and sign-off.
by Environment Utilities, from the CommunityDownloads: 10+Get - Template
Weld Trace Record
This Job Safety Observation template helps prevent dropped objects during at-height work. It guides teams to plan tasks, secure tools and materials, prepare the work area, control travel routes, and maintain effective barriers such as hoarding or meshing. It promotes using designed carrying pouches, removing or securing tools when not in use, and following written controls like checklists, hazard risk assessments, and safe work procedures. Suitable for mining operations and other high-risk environments where working at heights is common, this template supports safer, more consistent execution of tasks.
by Ryburn Regular, from the CommunityDownloads: 10+Get - Template
BLF/ROM/MCC Workplace Inspection Checklist
This BLF/ROM/MCC workplace inspection checklist supports mining site audits across barge loadout facilities, ROM areas, stackers, MCCs, and generators. It covers access and egress, emergency equipment and lighting, first aid and AEDs, guarding, signage, SWIs, slips and trips, electrical safety and RCDs, manual handling, hazardous chemicals and SDS, spill control, vehicle pre-starts, and environmental controls such as dust, waste, and bunding. Use it to identify hazards, record actions for fixes, and maintain compliance and safe operations.
by Dan Rayner, from the CommunityDownloads: 10+Get - Template
AMG Underground Haul Truck Inspection Checklist
This underground haul truck inspection checklist supports mining teams in evaluating critical systems before and after operation. It covers pre-start checks, PPE, walk-arounds, and functional tests, followed by detailed cab inspections, gauges and warning lights, ROPS and FOPS tags, and decals. Mechanical sections include engine, cooling, intake and exhaust, alternator and starter, transmission and torque converter with pressure readings, front and rear axles, and driveline components. It guides thorough brake measurements, pressures, and accumulator pre-charge, plus hydraulic system pressures, pumps, cylinders, and steering. Structural checks address frame pins, bushings, box and hoist components, and seat belts. Electrical checks include batteries, lighting, harnesses, and dash. It also includes pump flow testing, fire suppression verification, and recording key machine identifiers and specifications for compliance and safe underground operations.
by Carl Neudorf, from the CommunityDownloads: 10+Get - Template
DDA RiteDrill Drilling Rig Audit Checklist
Comprehensive drilling rig audit template for mining operations. Inspect rotary blasthole rigs across mechanical, electrical, structural and operational systems. Sections include operation and safety, operator cab, mainframe and crawler, engines compressors and drives, dust control, mast, drilling tools and accessories, hydraulics and plumbing, electrical and miscellaneous checks. Capture machine specifications and serial numbers, engine and compressor data, mast and consumables, undercarriage and jacks, dust control components and hydraulic controls. Supports common models from Caterpillar Sandvik Epiroc and Komatsu to benchmark condition, schedule maintenance and ensure compliance.
by James Murphy, from the CommunityDownloads: 10+Get - Template
Weekly Explosives Magazine and Reload Security Inspection
Use this weekly checklist to secure explosives magazines and reload facilities at mine sites. It helps blast supervisors verify perimeter integrity, locks, barbed wire, and fence gaps; maintain an 8 m clear zone free of items and vegetation; ensure spill kits are stocked; check no explosives precursors or empty AN containers are within 3 m of the fence; and manage spill controls so equipment cannot drive through spills. Support compliance and safer blasting operations.
by Skye Davis, from the CommunityDownloads: 10+Get - Template
Pre Start Coaching Observation Guide
Use this governance and coaching observation guide to run effective pre-start meetings. It helps supervisors set a clear objective, outline 3-5 key messages, consider the audience, and follow a strong communication process: get attention, take control, use a confident voice and body language, ask questions, manage tension, and check understanding and perceptions. Close the discussion, prepare yourself and others, and seek feedback to improve safety culture on site.
by Scott Walsh, from the CommunityDownloads: 10+Get - Template
Marfield Waste Area Inspection Checklist
Use this quarry waste area inspection checklist to assess and document conditions across segregated waste zones, including wood, plastic and rubber, and metal. Record date, inspector, location, and personnel, attach photos as evidence, and verify housekeeping and general tidiness. The template supports consistent waste management practices, helps identify issues for corrective action, and captures signatures for accountability. Ideal for quarry and mining sites seeking cleaner, safer, and compliant waste areas.
by Marfield Quarry, from the CommunityDownloads: 10+Get
Mining safety and quality resources your team can access on-site
Get faster access to proven safety and quality resources without starting from scratch. SafetyCulture’s Content Library is an online hub where workers can quickly find mining templates and training courses that support consistent standards across sites.
Instead of chasing documents or rebuilding tools, you can pull what you need, when you need it. That means less time preparing and more time reducing risk, improving compliance, and keeping operations moving.
Why digital resources matter
Using online resources also makes it easier to stay aligned across locations. Everyone works from the same up-to-date materials, with changes shared instantly and no version confusion.
Here’s how teams use the Content Library to get results faster:
Investigate incidents sooner and close gaps faster with an ICAM incident investigation template that guides root cause analysis.
Reduce fire and permit risks by rolling out a clear hot work permit to work template across sites.
Spot hazards earlier and track trends using a structured mine safety audit checklist.
All resources are digital and ready to adapt to your workflow. When used inside the SafetyCulture platform, you also get clearer reporting, real-time visibility, and stronger follow-through on actions, helping you build a consistent safety and quality culture at scale.