Skip to content
SafetyCulture
Template

Radiation Safety Checklist

by SafetyCulture

Free
Downloads: 317

This template is for checking compliance of safety measures in the workplace. Start by inspecting the availability and the visibility of radiation warnings. Conduct a contamination survey on the area and check if proper protective equipment are worn by the workers. Inspect if electrical devices are in good working condition and are marked with proper caution. Evaluate if operating and emergency procedures are posted for radiation-producing devices to ensure that these equipment has undergone device tests. Complete the inspection by providing recommendations and safety reminders.

About author

Free 1,000+ Workplace Checklists & Templates created by the SafetyCulture team.

You might also like

  • Welding Safety Checklist
    SafetyCulture logo
    Template

    Welding Safety Checklist

    Use this checklist before commencing welding tasks. Start by taking a photo of the work area and check if the operator has undergone proper training, understands instructions, and wears appropriate PPE. Next, evaluate if equipment is in good working condition and the working area is ventilated and free from flammables and obstructions. Inspect if procedures were followed during and after work. End the report by by providing recommendations and an overall safety rating.

    by SafetyCulture
    Downloads: 1,177
    Get
  • Laboratory Radiation Safety Checklist
    SafetyCulture logo
    Template

    Laboratory Radiation Safety Checklist

    Use this template to ensure safety when working with radioactive devices in the laboratory. Begin by detailing the building and room information and the radionuclides used for the activity. Check if the storage rooms and waste containers are adequate as well as the disposal practices for radioactive materials. Evaluate if laboratory safety measures are followed including personnel protection and monitoring for all workers. Lastly, training and survey records must be updated to ensure that all workers are competent and permitted to work during risky conditions.

    by SafetyCulture
    Downloads: 61
    Get
  • Confined Space Pre-Entry Inspection
    SafetyCulture logo
    Template

    Confined Space Pre-Entry Inspection

    Use this checklist before entering a confined space. Start by filling out general information about the confined space, its type, how often it is used, and the work to be performed inside. List down names of the people involved in the work and classify if it is permit-required or not. Next check if the area is free from hazards and ensure that the atmosphere is tested carefully. Evaluate if the workers are competent and trained to perform the job and if proper protective equipment (safety harness and lifelines) are worn properly. Lastly, ensure that permits are posted in the entrance of the confined space and show the names of the persons qualified to perform the job. Complete the audit by citing any safety recommendations.

    by SafetyCulture
    Downloads: 348
    Get
  • Radiation Protection Program Audit Checklist
    SafetyCulture logo
    Template

    Radiation Protection Program Audit Checklist

    Use this radiation protection program audit checklist to prepare your organization for annual audits. Digitized using SafetyCulture, you can customize this radiation safety program audit checklist to fit the needs of your organization. Source: https://www.apnga.com/Annual_Audit_Checklist.pdf

    by SafetyCulture
    Downloads: 44
    Get