Skip to content
SafetyCulture
Template

Welding, Cutting and Brazing OSHA Checklist

by SafetyCulture

Free
Downloads: 310

This OSHA self-inspection checklist can be used for inspecting safety of welding, cutting and brazing activities. Perform this quick self-inspection before operating any machinery equipment. Confirm that only trained personnel will be performing the task, check for gas cylinder handling and storage, inspect cables and equipment, check the work area and ventilation and ensure proper PPE is worn at all times.

About author

Free 1,000+ Workplace Checklists & Templates created by the SafetyCulture team.

You might also like

  • OSHA Hazardous Chemical Exposure Checklist
    SafetyCulture logo
    Template

    OSHA Hazardous Chemical Exposure Checklist

    This OSHA self-inspection Hazardous Chemical Exposure checklist can be used as a safety precaution before handling chemical substances. Ensure that trained and fully equipped personnel will be performing the task. Check chemical containers for leakage, damage or dents and if the work area has a proper ventilation system installed.

    by SafetyCulture
    Downloads: 279
    Get
  • Welding Risk Assessment
    SafetyCulture logo
    Template

    Welding Risk Assessment

    Use this welding risk assessment to identify the hazard associated with welding activities before commencing work. Record risk rating based on the hazards and assess control measures to be used and implemented for safety purposes. Use SafetyCulture to capture photos of the hazard and generate efficient reports on site.

    by SafetyCulture
    Downloads: 273
    Get
  • Welding Safety Checklist
    SafetyCulture logo
    Template

    Welding Safety Checklist

    Use this checklist before commencing welding tasks. Start by taking a photo of the work area and check if the operator has undergone proper training, understands instructions, and wears appropriate PPE. Next, evaluate if equipment is in good working condition and the working area is ventilated and free from flammables and obstructions. Inspect if procedures were followed during and after work. End the report by by providing recommendations and an overall safety rating.

    by SafetyCulture
    Downloads: 1,177
    Get
  • OSHA PPE Self-Inspection Checklist
    SafetyCulture logo
    Template

    OSHA PPE Self-Inspection Checklist

    This OSHA PPE Checklist contains 17 general inspection items to determine the need of PPE in protecting the workers, as well as equipment checks and evaluation of the compliance to safety rules when utilizing equipment.

    by SafetyCulture
    Downloads: 884
    Get