This PPE Checklist can be used by managers and safety officials to identify sources of hazard and select the appropriate equipment. Start by recording nature of work and potential hazards that may be in contact with body parts. The template then prompts the inspector to describe the hazard,state the required PPE and check the condition of the PPE by capturing photo evidence. Lastly, it summarizes the inspection by providing recommendations.
About author
Free 1,000+ Workplace Checklists & Templates created by the SafetyCulture team.
You might also like
- Templateby SafetyCulture
OSHA PPE Self-Inspection Checklist
This OSHA PPE Checklist contains 17 general inspection items to determine the need of PPE in protecting the workers, as well as equipment checks and evaluation of the compliance to safety rules when utilizing equipment.
Downloads: 878Get - Templateby SafetyCulture
PPE Safety Walk
Use this checklist to record general observations on PPE safety and inspect if overall body protection (head, eye, face, hand, body, foot) is sufficient to prevent injuries and accidents at work.
Downloads: 307Get - Templateby SafetyCulture
Welding Safety Checklist
Use this checklist before commencing welding tasks. Start by taking a photo of the work area and check if the operator has undergone proper training, understands instructions, and wears appropriate PPE. Next, evaluate if equipment is in good working condition and the working area is ventilated and free from flammables and obstructions. Inspect if procedures were followed during and after work. End the report by by providing recommendations and an overall safety rating.
Downloads: 1,177Get - Templateby SafetyCulture
Fall Protection Site Safety Inspection
Perform this checklist to identify safety measures before, during and after work shifts. Start with a description of the work, take photo of it and list down names of personnel performing the task. Next identify the safety measures which include permits, proper training, safety routes, vicinities and equipment. Then check the harness if it is properly connected and used. Afterwhich, Identify the changes that needs to be implemented and finally, summarize the inspection by providing recommendations of equipment to be replaced or remove from service.
Downloads: 291Get