A laser safety checklist is used by laser operators to identify beam and nonbeam hazards, reduce the risk of injuries, and apply appropriate control measures before using lasers in the workplace. Use this checklist to inspect employees' PPE, the laser-controlled area's housekeeping, and the laser machine guarding. It also contains inspection items for electrical and other hazards to ensure the safe use of lasers.
About author
Free 1,000+ Workplace Checklists & Templates created by the SafetyCulture team.
You might also like
Templateby SafetyCultureMachine Guarding OSHA Checklist
This Machine Guarding OSHA regulated checklist is for evaluating the preparedness of operators when handling machines. It also covers the inspection of the machine guards to ensure that it is securely placed and anchored. Use SafetyCulture to take photos of identified issues and immediately generate a report for review and action.
338 downloadsGet- Templateby SafetyCulture
PPE Checklist
This PPE Checklist can be used by managers and safety officials to identify sources of hazard and select the appropriate equipment. Start by recording nature of work and potential hazards that may be in contact with body parts. The template then prompts the inspector to describe the hazard,state the required PPE and check the condition of the PPE by capturing photo evidence. Lastly, it summarizes the inspection by providing recommendations.
2561 downloadsGet - Templateby SafetyCulture
Construction Safety Inspection Checklist
Use this construction safety inspection checklist to conduct an assessment on your construction sites and ensure it is safe to work in for your employees. This can be used by foremen and supervisors on daily basis and in case of spotted hazards, injuries, and the like.
154 downloadsGet - Templateby SafetyCulture
HSE Office Risk Assessment Template
This HSE office risk assessment template is used to identify and assess hazards present in an office-based environment to ensure that all employees are safe during their work shifts. This template can be used by team managers and safety officers to mitigate risks before any accidents or injuries happen. The template can serve as a guide for the inspector to do the following: Do a walkthrough and identify any hazards present, Take a photo of the hazards and annotate it for emphasis, Record who is at risk and control measures in place, List necessary actions to be done and who is responsible to mitigate the risks, Assign actions to responsible teams, Complete the audit by signing off.
267 downloadsGet