Categories
Construction
Browse construction management templates and training courses covering job site safety, industry standards, and regulatory checks. Support incident reporting, electrical safety, vehicle inspections, and daily site audits so your teams can reduce risk and stay compliant on every project.
Browse Construction
12,860 results- Template
Fiche contrôle étanchéité
Cette liste de contrôle est utilisée pour vérifier l'avancement des travaux et la qualité de l'exécution à un stade précis de la construction. Téléchargez et utilisez cette liste de contrôle pour identifier les défauts ou les failles du projet qui ne sont pas conformes aux normes de construction en vigueur dans votre région.
by SafetyCultureDownloads: 100+Get - Course
The Six Sigma Methodology: Control Phase
Ensuring quality is an important responsibility in the construction industry. This is the role of the Six Sigma methodology. In this course, we will focus on the fifth phase of the Six Sigma methodology, the Control phase. By discussing the Control phase, learners will know more about how improvement is monitored and controlled for process stabilization. At the end of this lesson, learners are expected to be more knowledgeable on the goals of the Control phase, as well as the different tools used in completing this phase.
by SafetyCultureGet1 LessonDownloads: 100+ - Template
Excavations Inspector's Tool WorkSafe NZ
This toolkit has been designed to support our inspectorate when conducting visits of construction sites.
by SafetyCultureDownloads: 100+Get - Template
Floor Inspection Checklist
Complete details on flooring dimensions, relative humidity (RH), temperature, moisture, and flooring problems seen and identified shall be detailed in this floor inspection report template.
by SafetyCultureDownloads: 100+Get - Course
Clause 10: Improvement (ISO 9001: 2015)
This course covers Clause 10 of ISO 9001:2015, focusing on improvement in construction. In this course, learners will explore how to address nonconformities, apply corrective actions, and implement continual improvement strategies based on Clause 10. The course also highlights tools for root cause analysis and the importance of proactive process refinement to ensure lasting client satisfaction. By the end of the course, learners will be able to recognize the features of Clause 10 in construction.
by SafetyCultureGet1 LessonDownloads: 100+ - Course
Asbestos for General Industry (US)
Asbestos, widely used in building materials for its strength and resistance to heat and corrosion, poses serious health risks including fatal diseases. This OSHA-compliant course educates your team on working safely with asbestos to prevent exposure. The training is quick - completed in under 15 minutes - and accessible from any device, promoting best practices across your workplace. With over 25 OSHA refresher topics available, this course supports annual compliance requirements. SC Training offers easy delivery, mobile reminders, and progress tracking for seamless management. Ideal for safety professionals and general industry workers with an OSHA DOL Card or last trained over 12 months ago. (Last Updated: June 2024)
by American Society of Safety Professionals (ASSP)Get4 LessonsDownloads: 100+ - Course
Mobile Scaffold Safety (AU)
This course was created in partnership with the Working at Height Association (WAHA) and focuses on the knowledge and skills related to the safe use of mobile scaffolds as published by SafeWork Australia and in alignment with AS/NZS 1576.1 Scaffolding – General requirements. Workers will learn about mobile scaffold operations and safety, how to move mobile scaffolds all while adhering to general guidelines to prevent accidents and ensure workplace safety. While you may customise this course to better suit your workplace, such modifications may result in the course no longer meeting specific legislation, regulations, or standards.
by Working At Height AssociationGet7 LessonsDownloads: 100+ - Course
Lean Principle 3: Create Flow
When companies do not effectively plan their operations, they can suffer from issues that harm the business, such as rework, delays, and budget overruns. These issues are considered “waste”. The third Lean principle emphasizes the importance of creating a smooth flow of operations to prevent bottlenecks that cause waste.
by SafetyCultureGet1 LessonDownloads: 100+ - Template
Modèle de permis de travail par point chaud
Le travail à chaud comprend le forgeage, l'extrusion, le laminage à chaud et tout autre processus qui implique la déformation des métaux par l'utilisation du feu. Ces tâches dangereuses nécessitent un permis avant de commencer tout type de travail à chaud. Utilisez ce modèle pour évaluer si les précautions nécessaires sont prises, par exemple en vérifiant l'équipement, en vérifiant si les matériaux combustibles sont correctement stockés et en évaluant les systèmes de sécurité incendie et les procédures d'urgence s'ils sont installés et en place. Utilisez la fonction de notation d'SafetyCulture pour déterminer les éléments défaillants et les facteurs sous-jacents.
by SafetyCultureDownloads: 100+Get - Template
ATL Asbestos Removal Audit Checklist
This ATL Asbestos Removal Audit Checklist helps teams plan and verify safe, compliant asbestos removal work. It covers supervisor presence and qualifications, surveys and registers, notifications, and required ARCP and SSSP documents. Personnel checks include medical fitness, training, and correct PPE and RPE use. The template guides setup of the asbestos work area and enclosures, ventilation and vacuum equipment checks, and daily inspections. It details decontamination unit standards, safe work methods, dust controls, and fall protection. Waste handling addresses bagging, labeling, storage, transport, and disposal to approved sites. Final clearance steps include independent assessment, air testing, cleaning, certification, and secure equipment storage.
by SafetyCultureDownloads: 100+Get - Template
Chainsaw Maintenance
This daily chainsaw maintenance checklist is divided into three parts to make your daily maintenance routines more efficient. Don't miss out on your pre-start, operational, and post-operative checks and maintenance when you use this template!
by SafetyCultureDownloads: 100+Get - Course
Specific Excavation Requirements (US)
Excavation work can be dangerous if not properly managed, with risks including cave-ins, falling loads, and hazardous atmospheres. This OSHA-compliant course helps your team understand specific excavation requirements to ensure safety and regulatory compliance. The training can be delivered today, completed in under 15 minutes, and accessed from any device. SC Training offers over 25 OSHA refresher topics. OSHA mandates annual refresher training on excavation safety, and this course supports easy compliance with reminders and progress tracking. It is designed for safety professionals and workers in construction with an OSHA DOL Card or last training over 12 months ago. (Last Updated: February 2024)
by American Society of Safety Professionals (ASSP)Get4 LessonsDownloads: 100+ - Template
Heavy Equipment Inspection - Industry Vetted
This checklist was developed by our Industry Expert Partners and guides operators through critical daily inspections before using heavy equipment. Covering general walk-around, fluid levels, powertrain, electrical systems, controls and gauges, cab safety, braking, steering, travel, and specific checks for backhoes, excavators, dozers, cranes, skid steers, and front-end loaders, this template helps mitigate risks and ensure equipment readiness.
by SafetyCultureDownloads: 100+Get - Template
General Construction Building Checklist
This general construction building checklist covers the full build lifecycle, from site preparation and foundations to framing, roofing, exterior cladding, weather-tightness, plumbing, electrical, insulation, interiors, and outdoor works. Use it to verify materials and workmanship, follow manufacturer instructions, meet building code requirements, improve safety with scaffolding and barriers, and ensure quality finishes. Ideal for contractors, site managers, and owners seeking consistent inspections and reduced project risks.
by SafetyCultureDownloads: 100+Get - Course
The Six Sigma Methodology: Improve Phase
Ensuring quality is an important responsibility in the construction industry. This is the role of the Six Sigma methodology. In this course, we will focus on the fourth phase of the Six Sigma methodology, the Improve phase. By discussing the Improve phase, learners will know more about how improvement plans are developed, finalized, and approved. At the end of this lesson, learners are expected to be more knowledgeable on the goals of the Improve phase, as well as the different tools used in completing this phase.
by SafetyCultureGet1 LessonDownloads: 100+ - Course
Lead in Construction (US)
Approximately 838,000 construction workers face lead exposure, which can severely impact the nervous system, kidneys, and other vital organs. This OSHA-compliant course provides essential control measures to protect your team from lead hazards. Designed for quick completion in under 15 minutes and accessible on any device, it promotes best safety practices. With over 25 OSHA refresher topics available, this training helps meet annual compliance requirements. SC Training makes delivery simple, with mobile reminders and progress tracking. Ideal for safety professionals and construction workers holding an OSHA DOL Card or last trained over 12 months ago. (Last Updated: June 2024)
by American Society of Safety Professionals (ASSP)Get4 LessonsDownloads: 100+ - Course
Lean Principle 1: Define Value
When companies do not effectively plan their operations, they can suffer from issues that harm the business, such as rework, delays, and budget overruns. These issues are considered “waste”. The first Lean principle emphasizes the importance of planning and focuses on defining what the customer values to ensure that waste is minimized throughout the construction process.
by SafetyCultureGet1 LessonDownloads: 100+ - Course
Machine Guarding (US)
Machines improve work speed and efficiency but also pose risks such as bruises, amputations, and fatalities. This OSHA-compliant course teaches your team about machine guarding to prevent injuries and promote safety. The training is quick, accessible from any device, and can be delivered today. SC Training offers over 25 OSHA refresher topics. OSHA requires annual refresher training and recordkeeping, which SC Training simplifies with reminders and progress tracking. This course is ideal for safety professionals and workers in industries like construction who have an OSHA DOL Card or last trained over 12 months ago. (Last updated: May 2024)
by American Society of Safety Professionals (ASSP)Get4 LessonsDownloads: 100+ - Template
Landscape Maintenance Safety Inspection Checklist
Utilize this landscape safety inspection checklist to verify the safety level of work done on a landscaping maintenance project. This tool can help supervisors ensure safety of landscapers before they commence work.
by SafetyCultureDownloads: 100+Get - Template
Sebastian Construction Group Jobsite Inspection Report
Streamline construction site safety with this comprehensive jobsite inspection report template used by Sebastian Construction Group. Cover administration, PPE, cranes and hoisting, electrical, excavations, fall protection, fire protection, scaffolds, aerial lifts, housekeeping and public protection. Capture photos, note hazards, and create corrective actions with assignees, priorities and due dates. Complete digital sign off and export professional reports in PDF, Word, Excel or share via web link.
by SafetyCultureDownloads: 100+Get - Template
Formulaire de rapport sur les accidents évités de justesse
Un incident évité de justesse est un événement imprévu qui menace la sécurité ou la santé humaine, l'environnement ou la poursuite du fonctionnement normal de l'entreprise, dans lequel la dernière barrière de protection est mise au défi, mais vaincue. Utilisez ce formulaire pour signaler un incident évité de justesse.
by SafetyCultureDownloads: 100+Get - Template
Excavators Inspector's Tool WorkSafe NZ
This toolkit has been designed to support our inspectorate when conducting visits of construction sites. Includes items from Excavation Work Code of Practice, SafeWork Australia 2013 and the Health and Safety in Employment Act 1995.
by SafetyCultureDownloads: 100+Get - Template
Ladder Inspection Checklist (OSHA)
Primarily based on Stairways and Ladders: A Guide to OSHA Rules, this ladder inspection checklist also includes guidance from OSHA Standard 1910.23 (Ladders) and OSHA Portable Ladder Safety QuickCard. Use this digital checklist to perform a quick inspection of the ladder and add photos of defects you've identified. To notify someone regarding a particular ladder defect or unsafe condition, assign an action to them and indicate its priority level.
by SafetyCultureDownloads: 100+Get
Construction safety and quality resources for teams on- and off-site
Discover construction training courses and checklists in SafetyCulture’s Content Library, a centralized online resource where you can browse ready-made instructional and inspection materials. These digital resources give you quicker access to the information you need, right when you need it.
Digital resources that keep work moving
Using digital construction templates and checklists helps teams stay aligned on- and off-site. Moving safety and quality work online cuts down paperwork, reduces compliance gaps, and ensures everyone is working from the same up-to-date information. From incident reporting to equipment checks, updates are shared in real time so issues are flagged early and actions don’t get missed.
Explore a few ways these resources can improve your operations:
Log incidents with an incident report template and respond faster to safety issues.
Run safer worksites with construction safety checklists that help you spot hazards before they escalate.
Stay on top of equipment care with maintenance logs that prevent downtime and extend asset life.
Everything in this library is ready to use and fully digital, so you can adapt it to your workflow and share it across your team. And when you use these resources within the SafetyCulture platform, you unlock even more value—streamlined inspections, real-time insights, and a stronger safety and quality culture on every site.