Categories
Construction
Browse construction management templates and training courses covering job site safety, industry standards, and regulatory checks. Support incident reporting, electrical safety, vehicle inspections, and daily site audits so your teams can reduce risk and stay compliant on every project.
- Template
Modèle de permis de travail par point chaud
Le travail à chaud comprend le forgeage, l'extrusion, le laminage à chaud et tout autre processus qui implique la déformation des métaux par l'utilisation du feu. Ces tâches dangereuses nécessitent un permis avant de commencer tout type de travail à chaud. Utilisez ce modèle pour évaluer si les précautions nécessaires sont prises, par exemple en vérifiant l'équipement, en vérifiant si les matériaux combustibles sont correctement stockés et en évaluant les systèmes de sécurité incendie et les procédures d'urgence s'ils sont installés et en place. Utilisez la fonction de notation d'SafetyCulture pour déterminer les éléments défaillants et les facteurs sous-jacents.
by SafetyCultureDownloads: 100+Get - Template
ATL Asbestos Removal Audit Checklist
This ATL Asbestos Removal Audit Checklist helps teams plan and verify safe, compliant asbestos removal work. It covers supervisor presence and qualifications, surveys and registers, notifications, and required ARCP and SSSP documents. Personnel checks include medical fitness, training, and correct PPE and RPE use. The template guides setup of the asbestos work area and enclosures, ventilation and vacuum equipment checks, and daily inspections. It details decontamination unit standards, safe work methods, dust controls, and fall protection. Waste handling addresses bagging, labeling, storage, transport, and disposal to approved sites. Final clearance steps include independent assessment, air testing, cleaning, certification, and secure equipment storage.
by SafetyCultureDownloads: 100+Get - Template
Chainsaw Maintenance
This daily chainsaw maintenance checklist is divided into three parts to make your daily maintenance routines more efficient. Don't miss out on your pre-start, operational, and post-operative checks and maintenance when you use this template!
by SafetyCultureDownloads: 100+Get - Course
Specific Excavation Requirements (US)
Excavation work can be dangerous if not properly managed, with risks including cave-ins, falling loads, and hazardous atmospheres. This OSHA-compliant course helps your team understand specific excavation requirements to ensure safety and regulatory compliance. The training can be delivered today, completed in under 15 minutes, and accessed from any device. SC Training offers over 25 OSHA refresher topics. OSHA mandates annual refresher training on excavation safety, and this course supports easy compliance with reminders and progress tracking. It is designed for safety professionals and workers in construction with an OSHA DOL Card or last training over 12 months ago. (Last Updated: February 2024)
by American Society of Safety Professionals (ASSP)Get4 LessonsDownloads: 100+ - Template
General Construction Building Checklist
This general construction building checklist covers the full build lifecycle, from site preparation and foundations to framing, roofing, exterior cladding, weather-tightness, plumbing, electrical, insulation, interiors, and outdoor works. Use it to verify materials and workmanship, follow manufacturer instructions, meet building code requirements, improve safety with scaffolding and barriers, and ensure quality finishes. Ideal for contractors, site managers, and owners seeking consistent inspections and reduced project risks.
by SafetyCultureDownloads: 100+Get - Course
Lead in Construction (US)
Approximately 838,000 construction workers face lead exposure, which can severely impact the nervous system, kidneys, and other vital organs. This OSHA-compliant course provides essential control measures to protect your team from lead hazards. Designed for quick completion in under 15 minutes and accessible on any device, it promotes best safety practices. With over 25 OSHA refresher topics available, this training helps meet annual compliance requirements. SC Training makes delivery simple, with mobile reminders and progress tracking. Ideal for safety professionals and construction workers holding an OSHA DOL Card or last trained over 12 months ago. (Last Updated: June 2024)
by American Society of Safety Professionals (ASSP)Get4 LessonsDownloads: 100+ - Course
Machine Guarding (US)
Machines improve work speed and efficiency but also pose risks such as bruises, amputations, and fatalities. This OSHA-compliant course teaches your team about machine guarding to prevent injuries and promote safety. The training is quick, accessible from any device, and can be delivered today. SC Training offers over 25 OSHA refresher topics. OSHA requires annual refresher training and recordkeeping, which SC Training simplifies with reminders and progress tracking. This course is ideal for safety professionals and workers in industries like construction who have an OSHA DOL Card or last trained over 12 months ago. (Last updated: May 2024)
by American Society of Safety Professionals (ASSP)Get4 LessonsDownloads: 100+ - Template
Landscape Maintenance Safety Inspection Checklist
Utilize this landscape safety inspection checklist to verify the safety level of work done on a landscaping maintenance project. This tool can help supervisors ensure safety of landscapers before they commence work.
by SafetyCultureDownloads: 100+Get - Course
Hazard Communication in Construction (US)
Exposure to toxic chemicals is a common risk in construction, making hazard communication essential for worker safety. This course helps teams understand how to identify and handle hazardous materials to reduce health risks on the job. Designed to meet OSHA standards, the training promotes best practices and can be completed in under 15 minutes from any device. It also supports annual refresher requirements by helping employers deliver quick, effective training and track progress for compliance. Ideal for safety professionals and workers in the construction industry who received their OSHA DOL Card or training more than a year ago. (Last Updated: April 2024)
by American Society of Safety Professionals (ASSP)Get5 LessonsDownloads: 100+ - Template
Heavy Equipment Daily Inspection Checklist
Use this checklist to perform daily heavy equipment inspections prior to use on site.
by SafetyCultureDownloads: 100+Get - Course
Clause 5: Leadership Commitment (ISO 9001: 2015)
This refresher course on ISO 9001:2015 Clause 5 provides an overview of leadership’s role in driving Quality Management System (QMS) success in the construction industry. It covers clause sections such as aligning the QMS with strategic goals (Clause 5.1), defining a quality policy that supports measurable objectives (Clause 5.2), and fostering accountability through clear roles and responsibilities (Clause 5.3).
by SafetyCultureGet1 LessonDownloads: 100+ - Course
Heat Injury and Illness Prevention Standards (CA)
This course covers heat illness prevention standards for manual laborers in California, including Cal/OSHA regulations, emergency procedures, hydration guidelines, and acclimatization strategies. It teaches employees how to recognize heat illness symptoms, the importance of rest breaks, and proper reporting protocols to ensure safety in hot work environments. (Last updated: February 2025)
by SafetyCultureGet5 LessonsDownloads: 100+ - Template
Sebastian Construction Group Jobsite Inspection Report
Streamline construction site safety with this comprehensive jobsite inspection report template used by Sebastian Construction Group. Cover administration, PPE, cranes and hoisting, electrical, excavations, fall protection, fire protection, scaffolds, aerial lifts, housekeeping and public protection. Capture photos, note hazards, and create corrective actions with assignees, priorities and due dates. Complete digital sign off and export professional reports in PDF, Word, Excel or share via web link.
by SafetyCultureDownloads: 100+Get - Template
Formulaire de rapport sur les accidents évités de justesse
Un incident évité de justesse est un événement imprévu qui menace la sécurité ou la santé humaine, l'environnement ou la poursuite du fonctionnement normal de l'entreprise, dans lequel la dernière barrière de protection est mise au défi, mais vaincue. Utilisez ce formulaire pour signaler un incident évité de justesse.
by SafetyCultureDownloads: 100+Get - Template
Excavators Inspector's Tool WorkSafe NZ
This toolkit has been designed to support our inspectorate when conducting visits of construction sites. Includes items from Excavation Work Code of Practice, SafeWork Australia 2013 and the Health and Safety in Employment Act 1995.
by SafetyCultureDownloads: 100+Get - Template
Ladder Inspection Checklist (OSHA)
Primarily based on Stairways and Ladders: A Guide to OSHA Rules, this ladder inspection checklist also includes guidance from OSHA Standard 1910.23 (Ladders) and OSHA Portable Ladder Safety QuickCard. Use this digital checklist to perform a quick inspection of the ladder and add photos of defects you've identified. To notify someone regarding a particular ladder defect or unsafe condition, assign an action to them and indicate its priority level.
by SafetyCultureDownloads: 100+Get - Template
Punch List Checklist
This simple punch list template includes common pre-closeout issues which contractors can verify as compliant or non-compliant. When a punch list item is compliant, all the contractor has to do is tick the checkbox beside it. The punch list checklist also uses scoring, so that contractors know the overall progress of their punch list at a glance.
by SafetyCultureDownloads: 100+Get - Template
Landscaping Maintenance Checklist for HOA
Property managers of Homeowners Associations (HOA) can use, customize, and share this landscaping maintenance checklist for the landscaping duties of their members' properties. Save time on doing manual data entry and let SafetyCulture send auto-generated reports of completed landscaping work to key recipients
by SafetyCultureDownloads: 100+Get - Template
HTS May 2024 Sub-Contractor Vehicle Safety Equipment Audit HTS Sub-Contractor Vehicle Safety Equipment Audit 08/05/2024 - 08/11/2024
HTS Sub-Contractor Vehicle Safety Equipment Audit 08/05/2024 - 08/11/2024
by Hseq Hts, from the CommunityDownloads: 100+Get - Template
Heights (working at) EWP SWMS 10515
ALL PERSONS INVOLVED IN TASK MUST HAVE THIS SWMS COMMUNICATED TO THEM PRIOR TO WORK COMMENCING
by NRG Supervisor, from the CommunityDownloads: 100+Get - Template
Safety Start Card Guide for Construction Site Management
Comprehensive guide for construction site safety management. Includes hazard identification, PPE requirements, crew safety protocols, and end of shift review procedures.
by Stacy and Witbeck, from the CommunityDownloads: 100+Get - Template
Marbut Stone Installer sign off and pre start V2.0
This template is to be used by all InstallAus Stone Installers on completion of the job
by Sam Borg, from the CommunityDownloads: 100+Get
Construction safety and quality resources for teams on- and off-site
Discover construction training courses and checklists in SafetyCulture’s Content Library, a centralized online resource where you can browse ready-made instructional and inspection materials. These digital resources give you quicker access to the information you need, right when you need it.
Digital resources that keep work moving
Using digital construction templates and checklists helps teams stay aligned on- and off-site. Moving safety and quality work online cuts down paperwork, reduces compliance gaps, and ensures everyone is working from the same up-to-date information. From incident reporting to equipment checks, updates are shared in real time so issues are flagged early and actions don’t get missed.
Explore a few ways these resources can improve your operations:
Log incidents with an incident report template and respond faster to safety issues.
Run safer worksites with construction safety checklists that help you spot hazards before they escalate.
Stay on top of equipment care with maintenance logs that prevent downtime and extend asset life.
Everything in this library is ready to use and fully digital, so you can adapt it to your workflow and share it across your team. And when you use these resources within the SafetyCulture platform, you unlock even more value—streamlined inspections, real-time insights, and a stronger safety and quality culture on every site.