Use this template when inspecting traffic control plans and safety precautions before commencing work each shift. Start the inspection by providing details of the project, speed limits and expected traffic conditions. Inspect the temporary traffic control safety measures including safety signs, channelizing devices, PPE worn and flagging. Next inspect the internal traffic control measures to ensure workers are safety separated from mobile construction equipment. Provide a final overall rating of the traffic control measures and any recommendations.
About author
Free 1,000+ Workplace Checklists & Templates created by the SafetyCulture team.
You might also like
Templateby SafetyCultureTraffic Control Measures Checklist
This template can be used to implement traffic control measures in your workplace. This covers vehicle and pedestrian routes, vehicle movements, warning devices, and traffic signs. Use SafetyCulture to capture a photo of defective equipment and assign a corrective action to different workers.
Downloads: 1,084Get- Templateby SafetyCulture
General Health and Safety Risk Assessment
This General Health and Safety Risk Assessment template can be used by managers and safety officials when managing health and safety hazards at work. Spot potential and existing hazards such as biological, chemical, energy, environmental, and the like. Evaluate each hazard's risk level and provide preventive control measures. Monitor and review planned control measures and advise if further measures are required. Lastly, provide overall recommendations to avoid and manage risk hazards. Use SafetyCulture to capture photos of frequently ignored and undetected hazards and assign actions to notify your managers of immediate risks.
Downloads: 1,527Get - Templateby SafetyCulture
Radiation Safety Checklist
This template is for checking compliance of safety measures in the workplace. Start by inspecting the availability and the visibility of radiation warnings. Conduct a contamination survey on the area and check if proper protective equipment are worn by the workers. Inspect if electrical devices are in good working condition and are marked with proper caution. Evaluate if operating and emergency procedures are posted for radiation-producing devices to ensure that these equipment has undergone device tests. Complete the inspection by providing recommendations and safety reminders.
Downloads: 317Get - Templateby SafetyCulture
Fall Protection Site Safety Inspection
Perform this checklist to identify safety measures before, during and after work shifts. Start with a description of the work, take photo of it and list down names of personnel performing the task. Next identify the safety measures which include permits, proper training, safety routes, vicinities and equipment. Then check the harness if it is properly connected and used. Afterwhich, Identify the changes that needs to be implemented and finally, summarize the inspection by providing recommendations of equipment to be replaced or remove from service.
Downloads: 291Get