Template

Digital Billboard Preventive Maintenance Checklist

by Dan Martell, from the Community

This preventive maintenance checklist helps technicians service digital billboard structures and displays. It covers site and structural condition checks, safety access equipment, and trim systems; display face inspection with white balance verification and module calibration; control system servicing including corrosion checks, ethernet connections with dielectric grease, control box filter cleaning, fan testing, antenna mounts and connectors, photocell operation, redundant PC failover, and camera housing cleaning; cabinet-level tasks such as filter replacement, water intrusion checks, power supply fan operation and AC connection integrity, door latch verification, and inspection of control cards; plus spare parts enclosure inspection and parts count. The workflow includes photo documentation, notes for issues, and inspector signature to complete the record.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template
BFT Maintenance Sheet
This BFT maintenance sheet supports onsite engineers in servicing refrigeration packs and coldrooms. It covers system and pack checks, condenser and fan operation, discharge and suction pressures, F-Gas leak inspections, PRV dates and replacement needs, oil filter and cooler condition, vibration and fittings, electrical terminals and overloads, backup battery health, heaters and online access. It also guides probe and transducer verification, door and safety systems, evaporator condition, fan operation, and probe calibration, with sections for comments, parts, and signatures.
by Anthony Lomas, from the Community
Downloads: 0
Get
Template
Billboard Structure Inspection Checklist AOA 4.1
This AOA Billboard Structure Inspection 4.1 checklist helps inspectors evaluate billboard structures across monopole, I beam, wood pole, A frame, and wall mounted styles. It covers foundation and footing conditions, anchor bolts, plates, gussets, weld integrity, and signs of corrosion. Inspect column splices, plate to plate bolted splices, head plate connections, and torsion pipe condition. Verify uprights, outriggers, angle iron, bolts, and weld quality. Assess access ladders, catwalks, safety cables, and overall structural alignment. Review electrical service, fixtures, lighting, time clocks, painting needs, and signage apron condition. Capture photos, record hazards, add comments, and sign off to document safety and maintenance actions.
by Dean Martell, from the Community
Downloads: 20+
Get
Template
HVAC Summer Pre Season Preventive Maintenance
This HVAC preventive maintenance checklist supports major summer pre season servicing for Zones 1 and 2. It guides technicians through inspections of packaged AC and heat pump units, gas packs, chillers, boilers, water source heat pumps and cooling towers. Tasks include cabinet and wiring checks, refrigerant and oil leak inspections, economizer verification, linkage lubrication, condenser and evaporator coil cleaning, belt replacement and tensioning, drain pan and trap cleaning, thermostat accuracy, sensor verification, compressor and fan operation, recording amperage, suction and discharge pressures, and safety device tests. It also covers VFD checks, VAV and fan powered unit inspections, TXV bulb security, MERV 8 and LEED required MERV 13 filter replacement, heat exchanger and defrost cycle checks, auxiliary heat, pump inspections and verification of overall sequence of operations.
by Kacey Buffington, from the Community
Downloads: 0
Get
Template
RESCo Maintenance Checklist
This RESCo Maintenance Checklist is designed for solar PV system upkeep across rooftop installations. It guides technicians through module cleanliness, array inspections, shading and debris checks, corrosion checks on grounding and frames, and cleaning recommendations. Electrical steps cover DC and AC wiring, combiners and re-combiners, disconnects, conduit integrity, and IR thermography of connections. It also includes torque verification on field and factory connections, weather station and sensor checks, data acquisition verification, and detailed inverter maintenance tasks such as inspecting seals, recording fault codes, and filter cleaning. The checklist captures safety considerations, photo evidence, comments, and action items for follow up, with sign off at completion.
by Terrence Haynes, from the Community
Downloads: 20+
Get

Digital Billboard Preventive Maintenance Checklist

About author

You might also like

BFT Maintenance Sheet

Billboard Structure Inspection Checklist AOA 4.1

HVAC Summer Pre Season Preventive Maintenance

RESCo Maintenance Checklist

You might also like

BFT Maintenance Sheet

Billboard Structure Inspection Checklist AOA 4.1

HVAC Summer Pre Season Preventive Maintenance

RESCo Maintenance Checklist