Template

Self Retracting Lanyard Inspection Checklist

10+

This self retracting lanyard inspection checklist helps crews verify the condition and function of SRLs before use. Inspect hardware, carabiners, and casings for distortion, sharp edges, burns, corrosion, or oil. Confirm buckle tabs operate smoothly and the belt engages with an audible click. Check webbing for tears, abrasions, discoloration, and burns, and ensure stitching is intact. Use this template to document findings, flag defects, and maintain compliance with site safety rules and fall protection standards.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

Fall Protection Equipment Inspection Checklist

Use this fall protection equipment inspection checklist to assess full body harnesses, lanyards (single and dual), self-retracting lifelines, tie-off adaptors, hooks/carabiners, and ascenders before work at height. Verify labels and tags, check hardware for damage, corrosion, cracks, sharp edges, and proper operation, and inspect webbing for cuts, frays, broken fibers, stitches, tears, abrasions, mold, or burns. Confirm SRL function, lock and retraction, and document any defects, corrective actions, and removal from service. Capture signatures to complete the inspection and improve safety compliance.

by Dayna Neal, from the Community

10+

Get

Template

Safety Harness and Lanyard Inspection

This safety harness and lanyard inspection checklist helps competent persons assess fall protection equipment before use. Record harness and lanyard details including manufacturer, model, serial and lot numbers, dates of manufacture and first service, and type and length. Verify CE marking and EN 354 compliance. Inspect hardware such as D-rings, buckles, and karabiners for corrosion, cracks, distortion, sharp edges, and free movement. Review all webbing and stitching for frays, cuts, burns, chemical damage, pulled or missing threads, discoloration, hardness, and fall indicator deployment. Confirm labels are present, legible, and secure. Document overall disposition, approve or remove items from service, note inspector name and inspection date, and set the next inspection due date.

by Greg Beaver, from the Community

Get

Template

Periodic Harness and Lanyard Inspection

This periodic harness and lanyard inspection checklist guides 6-monthly checks of fall protection equipment. Record inspector details, inspection dates, company and kit numbers, and confirm items are clean and suitable for visual inspection. For harnesses, capture serial numbers and assess webbing for cuts, tears, abrasions, discoloration, and heat damage; inspect buckles and attachment links for deformation, sharp edges, corrosion, cracks, and function; verify stitching and web tidies. For lanyards, capture serials and inspect webbing, buckles, connectors, stitching, and the shock-absorbing pack. Document missing components, age limits exceeded, comments, recommended actions, and an overall pass or fail with sign-off. Use this template to maintain compliance and equipment safety for work at heights.

by Paul Bessent, from the Community

10+

Get

Template

Full Body Harness and Lanyard Inspection

This checklist helps workers verify the condition of full body harnesses and lanyards before use. Record site details and inspector information, confirm labels are attached and legible, and capture manufacture dates, serials, and model numbers for both harness and lanyard. Inspect hardware including buckles, D-rings, back pad, and loop keepers for damage, deformation, sharp edges, burrs, cracks, and corrosion. Assess webbing and stitching for frays, cuts, broken fibers, tears, abrasions, mold, and burns. If any defect is found, remove the equipment from service. Includes sign off for traceability and compliance with work at height safety.

by Mark Howard, from the Community

20+

Get

Template

BAPKO Metal Fall Protection Equipment Inspection

This checklist supports routine inspection of fall protection equipment used for work at heights. Record harness details including label legibility, date of manufacture, serial, lot, and model. Assess hardware for damage, distortion, sharp edges, burrs, cracks, and corrosion. Examine webbing for cuts, frays, broken fibers and stitches, tears, abrasions, mold, and burns. Capture lanyard make and identifiers, evaluate condition, and document overall results. If defects are found, remove from service and destroy. Includes inspector signature.

by Jeff Trout, from the Community

Get

Template

Full Body Harness and Lanyard Examination

Use this Full Body Harness and Lanyard Examination checklist to complete regular six month inspections of fall protection equipment. Verify identification labels and traceability, check D-rings, buckles, karabiners and other hardware for corrosion, cracks and sharp edges, and inspect webbing and stitching for cuts, burns, chemical damage and wear. Confirm shock absorbers and fall indicators have not deployed, record defects, add photo evidence, and decide if equipment is safe to use or must be removed from service. Capture inspector details, dates and signatures for compliance.

by Mark Ainsworth, from the Community

10+

Get