Template

Pre IV Verification Walk Checklist

Use this Pre IV Verification Walk checklist to verify telecom site readiness before inspection or handover. Confirm pits are cleaned, conduits are capped, sealed, and trimmed, J-Bell is labeled with loops and holder present, and fibre cables are correctly identified. Capture site details such as location, date, and preparer, record defects, add notes, and collect signatures to close out the walk. Ideal for field teams performing fibre and conduit verification on telecommunications infrastructure projects.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

FTTH City Fibre Build Walk-Off Report SCCI V1.5

This FTTH City Fibre Build Walk-Off Report is a field completion checklist for documenting fibre installation works in residential blocks. Capture site information, access requirements, and fire safety compliance including trunking, fire clips above doors and exits, and any fire stopping. Record light loss readings, distribution point locations and served properties, plus street cabinet numbers, fibre connectivity, and lead-in details. Upload photos of DPs, cables, cabinets, trunking, and red line drawings, then finalize with notes and sign-off to confirm the build matches the job pack.

by Andy Holland, from the Community

40+

Get

Template

Pre-Inspection Walk Through Checklist

This Pre-Inspection Walk Through checklist helps property and facilities teams document site conditions before a formal inspection. Capture details such as halls and flooring, elevator doors and cabs, landings and fire doors, residential hall ceilings and baseboards, unit entry doors, and any pre-existing damage. Record the date, time, location, and preparer, then confirm the walkthrough record for clear, auditable documentation.

by Randy Menjivar, from the Community

Get

Template

Air Blown Fibre Record Template

This Air Blown Fibre Record template helps telecom field teams capture key details during fibre installation. Record client and site codes, define the fibre section from feeder manhole or ABFAT to the next manhole, and log measured distances between manholes. Attach photos showing fibre left in each manhole, plus far-end images. Document remedial actions with before and after photos and add comments for quality assurance and handover.

by Rowan Hill, from the Community

30+

Get

Template

Pre-On Maintenance Inspection Checklist

This pre-on maintenance inspection checklist helps construction teams verify readiness of civil works before client or council inspection. It covers roads and line marking, kerbs and footpaths, stormwater and roofwater systems, sewer and water infrastructure, electrical and communications pits, site turfing and fencing, and final site cleanliness. Use it to confirm tests and CCTV inspections are complete, markers are installed, and lots are ready for handover.

by SafetyCulture

Get

Template

Hazard Spotting Walk

Use this Hazard Spotting Walk template to run quick daily safety walks across your site or unit. Capture physical hazards and housekeeping issues, check that floors and walkways are clear, confirm fire controls are present and accessible, verify PPE compliance and orders, record the on-shift manager or supervisor, and close out actions to maintain a safer workplace.

by Mark Harris, from the Community

10+

Get

Template

Cable and Fibre Telecoms Audit Checklist

This NGE cable and fibre telecoms audit checklist helps supervisors and field teams assess telecom infrastructure works against expected standards. It covers inspection details, site safety and PPE, welfare, tool condition, and calibration of detection equipment. It verifies work packs, RAMS, daily risk assessments, and adherence to safe systems of work including HSG47 and CAT and Genny processes. Sections address excavation housekeeping, external cabling routes and specifications, labeling, test records, waste disposal, and back rope installation. Fibre splicing checks include labeling, heatshrinks and seals, numbering, cleanliness, cassette management, cable identification, joint securing, pit sizing, stress loops, and splice tray labeling. Use this to document compliance and close out actions on site.

by David Parker, from the Community

10+

Get