Template

RES Building Rounds Checklist

by james.christopher@unthsc.edu, from the Community

This RES building rounds checklist helps facility operators perform consistent inspections across rooftop and basement systems, including AHUs, lab and bathroom exhaust, chilled water pumps, compressors, chillers, boilers, and vacuum systems. Record alarms, setpoints, temperatures, pressures, and equipment status, verify VFDs, and note required actions such as contacting controls or a foreman. Capture photos of leaks and document readings to maintain safe, continuous building operations.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
CBH Building Rounds Checklist
This CBH Building Rounds checklist guides facility operators through routine inspections of critical building systems. Sections cover boiler rooms, lab air compressors and dryer, heating hot water pumps, vacuum pumps, chilled water make-up, domestic water pumps, and Aerco domestic hot water. The chiller room includes TRANE and SMARDT units with prompts for alarms, resets, operating status, pressures, temperatures, and contacting a foreman when needed. Additional rounds include RO and DI water systems, rooftop exhaust fans, air handling units, and heat recovery equipment. Operators are reminded to wear safety gear, document leaks, record meter readings, check HOA switches, verify setpoints, and log statuses to ensure safe, reliable building operations.
by james.christopher@unthsc.edu, from the Community
Downloads: 0
Get
Template
LIB Building Rounds Checklist
Use this LIB Building Rounds checklist to standardize daily operator inspections across HVAC air handlers AHU 7 to 12, VFDs, and exhaust fans. Capture alarm status, time and cause, record corrective actions, verify return to normal operation, and notify controls or foreman when needed. Document leaks with photos, note safety gear, and complete rooftop and basement fan checks on schedule. Designed for facilities teams to improve equipment uptime, safety and compliance.
by james.christopher@unthsc.edu, from the Community
Downloads: 0
Get
Template
Mechanical and Building Daily Rounds Sheet
This mechanical and building daily rounds sheet helps facilities teams log critical operations across multiple buildings. Capture central plant metrics including VFD pump status, differential pressures, supply/return temperatures, tower conductivity, and BMS-verified readings. Validate boilers, hot water pumps, strainers, and sump pumps. Perform building checks covering fire panels, elevators, water heaters, PIV locks, risers, and document trash enclosure status to maintain safety and uptime.
by Marie Beunaiche, from the Community
Downloads: 10+
Get
Template
Hospital Facility Daily Rounds Checklist
This hospital facility rounds checklist supports daily inspections at Marble Falls Hospital and similar healthcare sites. Capture readings and statuses for medical gas systems (oxygen, nitrous oxide, nitrogen, CO2), medical air and vacuum systems, boilers and steam pressure, domestic hot water temperatures, water softeners and RO/DI water, chillers and evaporator temps, hot and chilled water pumps, cooling towers, and fire protection gauges. Use it to standardize documentation, spot issues early, and maintain compliance and safety across critical building systems during each round.
by Virgil Belk, from the Community
Downloads: 30+
Get

CBH Building Rounds Checklist

This CBH Building Rounds checklist guides facility operators through routine inspections of critical building systems. Sections cover boiler rooms, lab air compressors and dryer, heating hot water pumps, vacuum pumps, chilled water make-up, domestic water pumps, and Aerco domestic hot water. The chiller room includes TRANE and SMARDT units with prompts for alarms, resets, operating status, pressures, temperatures, and contacting a foreman when needed. Additional rounds include RO and DI water systems, rooftop exhaust fans, air handling units, and heat recovery equipment. Operators are reminded to wear safety gear, document leaks, record meter readings, check HOA switches, verify setpoints, and log statuses to ensure safe, reliable building operations.

by james.christopher@unthsc.edu, from the Community

Get

Template

LIB Building Rounds Checklist

Use this LIB Building Rounds checklist to standardize daily operator inspections across HVAC air handlers AHU 7 to 12, VFDs, and exhaust fans. Capture alarm status, time and cause, record corrective actions, verify return to normal operation, and notify controls or foreman when needed. Document leaks with photos, note safety gear, and complete rooftop and basement fan checks on schedule. Designed for facilities teams to improve equipment uptime, safety and compliance.

by james.christopher@unthsc.edu, from the Community

Get

Template

Mechanical and Building Daily Rounds Sheet

This mechanical and building daily rounds sheet helps facilities teams log critical operations across multiple buildings. Capture central plant metrics including VFD pump status, differential pressures, supply/return temperatures, tower conductivity, and BMS-verified readings. Validate boilers, hot water pumps, strainers, and sump pumps. Perform building checks covering fire panels, elevators, water heaters, PIV locks, risers, and document trash enclosure status to maintain safety and uptime.

by Marie Beunaiche, from the Community

10+

Get

Template

Hospital Facility Daily Rounds Checklist

This hospital facility rounds checklist supports daily inspections at Marble Falls Hospital and similar healthcare sites. Capture readings and statuses for medical gas systems (oxygen, nitrous oxide, nitrogen, CO2), medical air and vacuum systems, boilers and steam pressure, domestic hot water temperatures, water softeners and RO/DI water, chillers and evaporator temps, hot and chilled water pumps, cooling towers, and fire protection gauges. Use it to standardize documentation, spot issues early, and maintain compliance and safety across critical building systems during each round.

by Virgil Belk, from the Community

30+

Get

RES Building Rounds Checklist

About author

You might also like

CBH Building Rounds Checklist

LIB Building Rounds Checklist

Mechanical and Building Daily Rounds Sheet

Hospital Facility Daily Rounds Checklist

You might also like

CBH Building Rounds Checklist

LIB Building Rounds Checklist

Mechanical and Building Daily Rounds Sheet

Hospital Facility Daily Rounds Checklist