Template

CBH Building Rounds Checklist

by james.christopher@unthsc.edu, from the Community

This CBH Building Rounds checklist guides facility operators through routine inspections of critical building systems. Sections cover boiler rooms, lab air compressors and dryer, heating hot water pumps, vacuum pumps, chilled water make-up, domestic water pumps, and Aerco domestic hot water. The chiller room includes TRANE and SMARDT units with prompts for alarms, resets, operating status, pressures, temperatures, and contacting a foreman when needed. Additional rounds include RO and DI water systems, rooftop exhaust fans, air handling units, and heat recovery equipment. Operators are reminded to wear safety gear, document leaks, record meter readings, check HOA switches, verify setpoints, and log statuses to ensure safe, reliable building operations.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
RES Building Rounds Checklist
This RES building rounds checklist helps facility operators perform consistent inspections across rooftop and basement systems, including AHUs, lab and bathroom exhaust, chilled water pumps, compressors, chillers, boilers, and vacuum systems. Record alarms, setpoints, temperatures, pressures, and equipment status, verify VFDs, and note required actions such as contacting controls or a foreman. Capture photos of leaks and document readings to maintain safe, continuous building operations.
by james.christopher@unthsc.edu, from the Community
Downloads: 0
Get
Template
Hospital Facility Daily Rounds Checklist
This hospital facility rounds checklist supports daily inspections at Marble Falls Hospital and similar healthcare sites. Capture readings and statuses for medical gas systems (oxygen, nitrous oxide, nitrogen, CO2), medical air and vacuum systems, boilers and steam pressure, domestic hot water temperatures, water softeners and RO/DI water, chillers and evaporator temps, hot and chilled water pumps, cooling towers, and fire protection gauges. Use it to standardize documentation, spot issues early, and maintain compliance and safety across critical building systems during each round.
by Virgil Belk, from the Community
Downloads: 30+
Get
Template
Daily Mechanical Walk Checklist
Use this daily mechanical walk checklist to verify critical building systems across a hotel or mixed use facility. Inspect boilers, heat exchangers, hot and chilled water pumps, condenser water pumps, cooling towers, domestic cold and hot water, DHW recirculating pumps, and HVAC set points and temperatures. Check elevator control rooms, IT and AV rooms, generator and ATS rooms, fire pump and panel status, and main electrical rooms. Capture readings for supply and return temperatures, PSI, and room conditions, and log issues found on each floor and in the mechanical room. Use this template to standardize rounds, reduce downtime, and maintain safe reliable operations.
by David Carrillo, from the Community
Downloads: 10+
Get
Template
Lyra Incident Report Template
This hospital facility rounds checklist supports daily inspections at Marble Falls Hospital and similar healthcare sites. Capture readings and statuses for medical gas systems (oxygen, nitrous oxide, nitrogen, CO2), medical air and vacuum systems, boilers and steam pressure, domestic hot water temperatures, water softeners and RO/DI water, chillers and evaporator temps, hot and chilled water pumps, cooling towers, and fire protection gauges. Use it to standardize documentation, spot issues early, and maintain compliance and safety across critical building systems during each round.
by Virgil Belk, from the Community
Downloads: 30+
Get

CBH Building Rounds Checklist

About author

You might also like

RES Building Rounds Checklist

Hospital Facility Daily Rounds Checklist

Daily Mechanical Walk Checklist

Lyra Incident Report Template

You might also like

RES Building Rounds Checklist

Hospital Facility Daily Rounds Checklist

Daily Mechanical Walk Checklist

Lyra Incident Report Template