Template

Daily Plant Inspection - Zig Zag Building

by Steve Pearce, from the Community

10+

Use this daily plant inspection checklist for the Zig Zag Building to verify operation of boilers, LTHW pumps, chillers, critical cooling, pressurisation units, gas boosters, rainwater harvesting, booster pump sets, water tanks, and fire alarm panels. Record ambient temperature, capture photos of faults and status screens, note leaks, and document issues for follow-up across all plant rooms and levels.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Technical Daily Plant Roof Checks
This daily checklist guides facility teams through inspections of rooftop plant and machinery. Review wet and dry plant areas, LTHW and chilled water pressurisation units, cold water booster sets, AHU operations, constant and variable temperature pumps, chiller pumps, and CHP oil levels and run hours. Record boiler and water temperatures, calorifier and storage tank readings, and chlorine dioxide unit operation. Note reactive works, check the BMS for faults, and capture any issues for timely rectification and compliance.
by Jodie Coupland, from the Community
Downloads: 0
Get
Template
TRH Plantroom Checks
A detailed plantroom checks template for facilities teams to inspect and record the status of critical building services. Verify AHUs, Grundfos pump sets, MCC fault indicators, misting systems, booster sets, UPW and RO systems, humidifiers, boilers and calorifiers, CHP status, rainwater harvesting, CHW and LTHW pumps and pressurisation units, condensers and VRF panels. Capture LAN room temperatures, lighting adequacy, leaks, vibration and noise, housekeeping, and safety hazards across multiple plant room levels. Use it to standardize inspections, identify faults early, and maintain safe, efficient operations.
by Waylon Davies, from the Community
Downloads: 0
Get
Template
Booster Servicing Checklist
Use this Booster Servicing checklist to maintain building water booster sets. Record plant ID, inspect break tanks, pumps, expansion vessels, air vents, valves, and electrical connections. Check controls and panel status, verify gauges and pressures, note leaks, and capture photos. Include service summary and notes to document results and support compliant, preventive maintenance for facilities teams.
by Liam Williams, from the Community
Downloads: 0
Get
Template
Daily Building Checks Template
This daily building checks template helps facilities teams perform consistent inspections across a site. Verify fire alarm and security panels, confirm exits are clear and doors operate properly, and check LTHW and DHW boilers along with air handling units. Include grounds tasks such as perimeter checks, litter picking, bin areas, graffiti, and landscaping. Review plant room operations and pool plant where applicable, including pumps, filters, UV dose, flows, compressor, and chemical levels, with guidance to retest and recalibrate if out of range. Use this checklist to capture issues, photos, and notes to maintain safety, uptime, and compliance.
by Thomas Chambers, from the Community
Downloads: 0
Get

Technical Daily Plant Roof Checks

This daily checklist guides facility teams through inspections of rooftop plant and machinery. Review wet and dry plant areas, LTHW and chilled water pressurisation units, cold water booster sets, AHU operations, constant and variable temperature pumps, chiller pumps, and CHP oil levels and run hours. Record boiler and water temperatures, calorifier and storage tank readings, and chlorine dioxide unit operation. Note reactive works, check the BMS for faults, and capture any issues for timely rectification and compliance.

by Jodie Coupland, from the Community

Get

Template

TRH Plantroom Checks

A detailed plantroom checks template for facilities teams to inspect and record the status of critical building services. Verify AHUs, Grundfos pump sets, MCC fault indicators, misting systems, booster sets, UPW and RO systems, humidifiers, boilers and calorifiers, CHP status, rainwater harvesting, CHW and LTHW pumps and pressurisation units, condensers and VRF panels. Capture LAN room temperatures, lighting adequacy, leaks, vibration and noise, housekeeping, and safety hazards across multiple plant room levels. Use it to standardize inspections, identify faults early, and maintain safe, efficient operations.

by Waylon Davies, from the Community

Get

Template

Booster Servicing Checklist

Use this Booster Servicing checklist to maintain building water booster sets. Record plant ID, inspect break tanks, pumps, expansion vessels, air vents, valves, and electrical connections. Check controls and panel status, verify gauges and pressures, note leaks, and capture photos. Include service summary and notes to document results and support compliant, preventive maintenance for facilities teams.

by Liam Williams, from the Community

Get

Template

Daily Building Checks Template

This daily building checks template helps facilities teams perform consistent inspections across a site. Verify fire alarm and security panels, confirm exits are clear and doors operate properly, and check LTHW and DHW boilers along with air handling units. Include grounds tasks such as perimeter checks, litter picking, bin areas, graffiti, and landscaping. Review plant room operations and pool plant where applicable, including pumps, filters, UV dose, flows, compressor, and chemical levels, with guidance to retest and recalibrate if out of range. Use this checklist to capture issues, photos, and notes to maintain safety, uptime, and compliance.

by Thomas Chambers, from the Community

Get

Daily Plant Inspection - Zig Zag Building

About author

You might also like

Technical Daily Plant Roof Checks

TRH Plantroom Checks

Booster Servicing Checklist

Daily Building Checks Template

You might also like

Technical Daily Plant Roof Checks

TRH Plantroom Checks

Booster Servicing Checklist

Daily Building Checks Template