Template

Cut Out Inspection Checklist

by L+O East, from the Community

This cut out inspection checklist helps electricians and installers validate that all lights, switches, GPOs, exhaust fans, and smoke detectors are correctly cut out and positioned as per plan. It also covers cabling pulled to openings, cabinetry cutouts with the right hole saw sizes, island bench and kitchen lighting spacing, ducting and vent penetrations, and exterior services through brick or hebel. Include notes for damage reports, cleanup, and any issues before moving to fit-off.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Finishing Checklist for Rooms and Cabinetry
This finishing checklist helps inspectors and installers verify that each room and cabinetry fit-out meets quality standards. Confirm site and cabinetry cleaning, gapping to walls and ceiling, capping, door and drawer alignment, appliance openings per plan, adjustable shelves, benchtop installation, sink or cooktop cutouts, handle drilling and installation, and capture signatures.
by Carlos Paulek, from the Community
Downloads: 0
Get
Template
Electrical Fit Off Audit
This electrical fit off audit helps verify residential or commercial installations before handover. It covers pre site readiness, switchboard integrity and labelling, correct protection with circuit breakers and RCDs, insulation resistance testing, and busbar installation. Inspect exterior and interior fixtures for correct placement and height, straight and flush finishes, working GPOs and lights, IP rated switches where required, and adequate clearances from sinks and gas meters. Confirm smoke detectors are interlinked with fresh batteries, ceiling penetrations are neat, warnings for recessed lights are in place, and the site is clean. Complete fit off counts and damage reports.
by Pete Mayberry, from the Community
Downloads: 10+
Get
Template
WUC Site Cut Checklist
This WUC Site Cut checklist helps construction teams plan and verify residential site excavation. Review the approved excavation plan, FFL levels, driveway and decking cut depths, retaining wall clearances, batter slopes, easement and under-deck tank allowances, and fill materials. Record compaction or engineering certifications, note any damage to fences, services, or tree protection zones, upload photos, and complete supervisor sign off for compliance.
by Ganesan Gopal, from the Community
Downloads: 0
Get
Template
PROVIS Check In and Out Inspection Report
This PROVIS Check In and Out Inspection Report template helps property managers, inspectors, and tenants document the condition of residential units at move-in and move-out. It covers entrance, living rooms, kitchens, appliances, bedrooms, and bathrooms, including checks for AC performance, lighting, sockets and switches, tiles and grouting, cabinetry, fixtures, exhaust fans, locks, and keys. Add photos, notes, and signatures from the inspector, property manager, and tenant to ensure transparency and complete handover records.
by Adeel Anjum, from the Community
Downloads: 20+
Get

Finishing Checklist for Rooms and Cabinetry

This finishing checklist helps inspectors and installers verify that each room and cabinetry fit-out meets quality standards. Confirm site and cabinetry cleaning, gapping to walls and ceiling, capping, door and drawer alignment, appliance openings per plan, adjustable shelves, benchtop installation, sink or cooktop cutouts, handle drilling and installation, and capture signatures.

by Carlos Paulek, from the Community

Get

Template

Electrical Fit Off Audit

This electrical fit off audit helps verify residential or commercial installations before handover. It covers pre site readiness, switchboard integrity and labelling, correct protection with circuit breakers and RCDs, insulation resistance testing, and busbar installation. Inspect exterior and interior fixtures for correct placement and height, straight and flush finishes, working GPOs and lights, IP rated switches where required, and adequate clearances from sinks and gas meters. Confirm smoke detectors are interlinked with fresh batteries, ceiling penetrations are neat, warnings for recessed lights are in place, and the site is clean. Complete fit off counts and damage reports.

by Pete Mayberry, from the Community

10+

Get

Template

WUC Site Cut Checklist

This WUC Site Cut checklist helps construction teams plan and verify residential site excavation. Review the approved excavation plan, FFL levels, driveway and decking cut depths, retaining wall clearances, batter slopes, easement and under-deck tank allowances, and fill materials. Record compaction or engineering certifications, note any damage to fences, services, or tree protection zones, upload photos, and complete supervisor sign off for compliance.

by Ganesan Gopal, from the Community

Get

Template

PROVIS Check In and Out Inspection Report

This PROVIS Check In and Out Inspection Report template helps property managers, inspectors, and tenants document the condition of residential units at move-in and move-out. It covers entrance, living rooms, kitchens, appliances, bedrooms, and bathrooms, including checks for AC performance, lighting, sockets and switches, tiles and grouting, cabinetry, fixtures, exhaust fans, locks, and keys. Add photos, notes, and signatures from the inspector, property manager, and tenant to ensure transparency and complete handover records.

by Adeel Anjum, from the Community

20+

Get

Cut Out Inspection Checklist

About author

You might also like

Finishing Checklist for Rooms and Cabinetry

Electrical Fit Off Audit

WUC Site Cut Checklist

PROVIS Check In and Out Inspection Report

You might also like

Finishing Checklist for Rooms and Cabinetry

Electrical Fit Off Audit

WUC Site Cut Checklist

PROVIS Check In and Out Inspection Report