Template

TSL Fault with the Blow Checklist

by Steve O'Donoghue, from the Community

20+

This telecom field form supports NGA fibre installation teams in diagnosing a TSL fault during the fibre blowing process. Record customer and job details, note instructions, and document whether the sponge and dart passed, if fibre became stuck, and whether air was present at the ETP. Identify the likely fault location, capture labelled photos, and attach the report to Fibre Jam before emailing it to your field manager. Designed to streamline fault finding and documentation in fibre deployment.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Air Blown Fibre Record Template
This Air Blown Fibre Record template helps telecom field teams capture key details during fibre installation. Record client and site codes, define the fibre section from feeder manhole or ABFAT to the next manhole, and log measured distances between manholes. Attach photos showing fibre left in each manhole, plus far-end images. Document remedial actions with before and after photos and add comments for quality assurance and handover.
by Rowan Hill, from the Community
Downloads: 30+
Get
Template
NGA Last Step Fibre Scoping Form
This NGA Last Step Fibre Scoping Form supports Ultra-Fast Broadband (UFB) builds by capturing all details needed to plan Last Step Fibre (LSF) installations. Use it to log S/O number, address, commit date, and site contacts, define network type (air blown fibre, fixed fibre haul, aerial), and note skills and equipment required, including trenching, drilling, concrete cutting, and blowing distances. Record traffic management needs, obstructions, and customer consents for works inside and outside the property, plus agreed ONT location and job instructions. It also covers health, safety, and environmental checks, includes space for labelled photos, and references Chorus End User Terms for UFB installations.
by Tshifhiwa Netshidzivhani, from the Community
Downloads: 10+
Get
Template
G-Network Input Fibre Check
This field-ready checklist helps engineers assess and document the G-Network input fibre at a distribution point (DP). Record the address, reference number, input location and type, presence of incoming fibres, and required fibre length and count from the input to the DP. Capture photos for evidence and detail fibre requirements as per the job pack. Conclude with engineer signature to confirm findings and readiness. Use this template to standardize surveys, support quality assurance, and streamline handover for fibre installations.
by Nelio Goncalves, from the Community
Downloads: 0
Get
Template
NGA Fibre Ready Scoping Form Version 5
Use this NGA Fibre Ready Scoping Form Version 5 to scope fibre jobs from desktop to site. Capture build completion status, work type such as aerial, haul, surface mount, trench or drill, and network type including air blown fibre, fixed fibre and aerial. Record specific skill needs, distances, traffic management and other requirements. Collect customer details, job instructions and labelled photos. Note health, safety and environmental considerations and required consents for right of way, multi dwelling units and heritage sites. Document network assets such as FAT and cabinet locations and internal preferences for ONT and RGW. Includes end user consent and technician sign off for Ultra Fast Broadband provisioning.
by Pankaj Vashisht, from the Community
Downloads: 0
Get

Air Blown Fibre Record Template

This Air Blown Fibre Record template helps telecom field teams capture key details during fibre installation. Record client and site codes, define the fibre section from feeder manhole or ABFAT to the next manhole, and log measured distances between manholes. Attach photos showing fibre left in each manhole, plus far-end images. Document remedial actions with before and after photos and add comments for quality assurance and handover.

by Rowan Hill, from the Community

30+

Get

Template

NGA Last Step Fibre Scoping Form

This NGA Last Step Fibre Scoping Form supports Ultra-Fast Broadband (UFB) builds by capturing all details needed to plan Last Step Fibre (LSF) installations. Use it to log S/O number, address, commit date, and site contacts, define network type (air blown fibre, fixed fibre haul, aerial), and note skills and equipment required, including trenching, drilling, concrete cutting, and blowing distances. Record traffic management needs, obstructions, and customer consents for works inside and outside the property, plus agreed ONT location and job instructions. It also covers health, safety, and environmental checks, includes space for labelled photos, and references Chorus End User Terms for UFB installations.

by Tshifhiwa Netshidzivhani, from the Community

10+

Get

Template

G-Network Input Fibre Check

This field-ready checklist helps engineers assess and document the G-Network input fibre at a distribution point (DP). Record the address, reference number, input location and type, presence of incoming fibres, and required fibre length and count from the input to the DP. Capture photos for evidence and detail fibre requirements as per the job pack. Conclude with engineer signature to confirm findings and readiness. Use this template to standardize surveys, support quality assurance, and streamline handover for fibre installations.

by Nelio Goncalves, from the Community

Get

Template

NGA Fibre Ready Scoping Form Version 5

Use this NGA Fibre Ready Scoping Form Version 5 to scope fibre jobs from desktop to site. Capture build completion status, work type such as aerial, haul, surface mount, trench or drill, and network type including air blown fibre, fixed fibre and aerial. Record specific skill needs, distances, traffic management and other requirements. Collect customer details, job instructions and labelled photos. Note health, safety and environmental considerations and required consents for right of way, multi dwelling units and heritage sites. Document network assets such as FAT and cabinet locations and internal preferences for ONT and RGW. Includes end user consent and technician sign off for Ultra Fast Broadband provisioning.

by Pankaj Vashisht, from the Community

Get

TSL Fault with the Blow Checklist

About author

You might also like

Air Blown Fibre Record Template

NGA Last Step Fibre Scoping Form

G-Network Input Fibre Check

NGA Fibre Ready Scoping Form Version 5

You might also like

Air Blown Fibre Record Template

NGA Last Step Fibre Scoping Form

G-Network Input Fibre Check

NGA Fibre Ready Scoping Form Version 5