Template

MS3 Live Audit - Underground Works

by Matthew Morton, from the Community

Conduct real-time audits of telecom underground works with a structured checklist aligned to MS3 and BT Openreach requirements. Verify safe vehicle positioning, Chapter 8 signing and guarding, correct chamber entry and lifting methods, gas testing at all levels, GDU placement, and water tests. Confirm cable securing and labeling to specification, equipment condition and test dates, and site condition on completion. Capture photos, supervisors, qualifications, and complete final sign-off.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Dynamic Live Site Audit for Splicers
This dynamic live site audit checklist helps supervisors and engineers evaluate telecom splicing works on active sites. It covers pre-work checks, PPE, roadwork signage chapter 8, equipment setup and grounding, GDU use, ladder and guarding inspections, safe chamber entry and gas testing, working in chamber controls, cable securing and labeling, housekeeping, and final sign off. Capture photos, note observations, and verify qualifications to maintain safety and compliance on fiber and copper splicing jobs.
by Waqas Hashmi, from the Community
Downloads: 0
Get
Template
Dynamic Underground Safety Live Audits SA002
Use this SA002 Underground Safety Live Audit checklist to conduct real-time audits of underground works and confined space access. Verify on-site risk assessments, PPE, vehicle positioning, and site barriers. Check gas detection unit condition and use, perform full gas testing at chamber entry points, and review correct manhole cover removal methods. Capture photos, record observations, and ensure chambers are left safe. Conclude with sign-off from the engineer and auditor.
by Waqas Hashmi, from the Community
Downloads: 0
Get
Template
Supervisor Audit Form
Use this Supervisor Audit Form to capture site details, team roles, and required certifications, then verify equipment and safety controls during NETS telecom works. Sections cover PPE, MEWP and ladder checks, harness and lanyard condition, GDU availability, confined space for manholes, and overground and underground cable installation standards. General requirements include risk assessments, RAMS, Chapter 8 traffic management, first aid box and fire extinguisher checks, safe vehicle parking, and COSHH compliance.
by Muhammad Zohaib, from the Community
Downloads: 10+
Get
Template
Wildanet Internal Health and Safety Inspection
Use this internal health and safety inspection template to assess Wildanet field and office activities. Check pre work documentation and permits, PPE, streetworks setup aligned to NRSWA, and housekeeping. Verify plant and equipment condition, operator competence and records under PUWER, and calibration. Review working at height controls for MEWPs and ladders, including IPAF, LOLER, pre climb checks, rescue plans, and harness condition. Inspect underground chambers and confined spaces, gas detection and calibration, guarding, lifting methods, and emergency arrangements. Confirm fibre cabling and splicing practices, PIA pole and chamber requirements, labelling, and build specification. Audit fleet vehicle checks, safety equipment, and Chapter 8 markings, and office ergonomics, first aid, fire procedures, and slips trips and falls awareness.
by Shaun Jones, from the Community
Downloads: 0
Get

Dynamic Live Site Audit for Splicers

This dynamic live site audit checklist helps supervisors and engineers evaluate telecom splicing works on active sites. It covers pre-work checks, PPE, roadwork signage chapter 8, equipment setup and grounding, GDU use, ladder and guarding inspections, safe chamber entry and gas testing, working in chamber controls, cable securing and labeling, housekeeping, and final sign off. Capture photos, note observations, and verify qualifications to maintain safety and compliance on fiber and copper splicing jobs.

by Waqas Hashmi, from the Community

Get

Template

Dynamic Underground Safety Live Audits SA002

Use this SA002 Underground Safety Live Audit checklist to conduct real-time audits of underground works and confined space access. Verify on-site risk assessments, PPE, vehicle positioning, and site barriers. Check gas detection unit condition and use, perform full gas testing at chamber entry points, and review correct manhole cover removal methods. Capture photos, record observations, and ensure chambers are left safe. Conclude with sign-off from the engineer and auditor.

by Waqas Hashmi, from the Community

Get

Template

Supervisor Audit Form

Use this Supervisor Audit Form to capture site details, team roles, and required certifications, then verify equipment and safety controls during NETS telecom works. Sections cover PPE, MEWP and ladder checks, harness and lanyard condition, GDU availability, confined space for manholes, and overground and underground cable installation standards. General requirements include risk assessments, RAMS, Chapter 8 traffic management, first aid box and fire extinguisher checks, safe vehicle parking, and COSHH compliance.

by Muhammad Zohaib, from the Community

10+

Get

Template

Wildanet Internal Health and Safety Inspection

Use this internal health and safety inspection template to assess Wildanet field and office activities. Check pre work documentation and permits, PPE, streetworks setup aligned to NRSWA, and housekeeping. Verify plant and equipment condition, operator competence and records under PUWER, and calibration. Review working at height controls for MEWPs and ladders, including IPAF, LOLER, pre climb checks, rescue plans, and harness condition. Inspect underground chambers and confined spaces, gas detection and calibration, guarding, lifting methods, and emergency arrangements. Confirm fibre cabling and splicing practices, PIA pole and chamber requirements, labelling, and build specification. Audit fleet vehicle checks, safety equipment, and Chapter 8 markings, and office ergonomics, first aid, fire procedures, and slips trips and falls awareness.

by Shaun Jones, from the Community

Get

MS3 Live Audit - Underground Works

About author

You might also like

Dynamic Live Site Audit for Splicers

Dynamic Underground Safety Live Audits SA002

Supervisor Audit Form

Wildanet Internal Health and Safety Inspection

You might also like

Dynamic Live Site Audit for Splicers

Dynamic Underground Safety Live Audits SA002

Supervisor Audit Form

Wildanet Internal Health and Safety Inspection