Template

Wildanet Internal Health and Safety Inspection

by Shaun Jones, from the Community

Use this internal health and safety inspection template to assess Wildanet field and office activities. Check pre work documentation and permits, PPE, streetworks setup aligned to NRSWA, and housekeeping. Verify plant and equipment condition, operator competence and records under PUWER, and calibration. Review working at height controls for MEWPs and ladders, including IPAF, LOLER, pre climb checks, rescue plans, and harness condition. Inspect underground chambers and confined spaces, gas detection and calibration, guarding, lifting methods, and emergency arrangements. Confirm fibre cabling and splicing practices, PIA pole and chamber requirements, labelling, and build specification. Audit fleet vehicle checks, safety equipment, and Chapter 8 markings, and office ergonomics, first aid, fire procedures, and slips trips and falls awareness.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Contractor Health and Safety Performance Inspection
Use this contractor health and safety performance inspection template to assess compliance on active worksites. Sections cover pre-start documentation and permits, streetworks setup to NRSWA requirements, housekeeping and segregation, plant and equipment condition and competence, welfare and first aid, PPE, and work at height controls for ladders and MEWPs with training and LOLER checks. It also includes confined space entry and rescue planning, gas testing, environmental controls, and telecom-specific tasks such as subduct and blowing, rodding and roping, and splicing operations.
by Shaun Jones, from the Community
Downloads: 0
Get
Template
Casey Health Safety and Welfare Report
Use this construction site health, safety and welfare report template to evaluate documentation and planning, inductions and training records, welfare and emergency procedures, first aid, site signage and security, traffic management, environmental and waste controls, plant and vehicles, permits and fire protection, electrical safety, underground and overhead services, access and egress, work at height, scaffolding and edge protection, excavations and confined spaces, temporary works, slips trips and falls, noise vibration and dust, PPE, housekeeping and COVID-19 measures. Capture notes and photos to document compliance and corrective actions.
by Robert Clegg, from the Community
Downloads: 0
Get
Template
Health and Safety Consultant Audit and Inspection Checklist
This comprehensive Health and Safety consultant audit and inspection checklist helps assess compliance and risk controls on construction sites. It covers site safety management systems including RAMS, competence and CSCS verification, and permits. Equipment safety follows PUWER with pre use checks, guarding, maintenance and extraction for dust and fumes. Lifting operations address LOLER and manual handling. Specialist activities such as hot works and welding include permits, fire safety and protection of third parties. Working at height requirements include ladders, podiums and scaffold inspections and safe access. COSHH controls ensure correct PPE and exposure prevention. Housekeeping standards manage slips, trips, and waste. Occupational health focuses on dust, vibration, and noise controls. Welfare provisions verify toilets, wash facilities and break areas.
by Chris Smart, from the Community
Downloads: 0
Get
Template
Gamble Group Health and Safety Site Inspection
Use this practical template to perform comprehensive health and safety site inspections for construction projects. Capture client and site details, confirm construction phase plans and pre‑construction information, verify RAMS are present and followed, and check training and staff conduct. Review emergency arrangements, first aid and fire equipment, site access and security, lighting, and welfare provisions including toilets, water, and hygiene. Assess working at height controls, scaffolds, rescue plans, and lifting operations. Inspect plant, tools, and legal documents, safe use and storage, and reporting of damage. Verify electrical isolations and drawings, and controls for manual handling, vibration, dust, and noise. Check housekeeping, waste management, COSHH storage, and PPE suitability and use. Record comments, add media, and capture assessor signature to complete the inspection.
by Philip Gamble, from the Community
Downloads: 0
Get

Wildanet Internal Health and Safety Inspection

About author

You might also like

Contractor Health and Safety Performance Inspection

Casey Health Safety and Welfare Report

Health and Safety Consultant Audit and Inspection Checklist

Gamble Group Health and Safety Site Inspection

You might also like

Contractor Health and Safety Performance Inspection

Casey Health Safety and Welfare Report

Health and Safety Consultant Audit and Inspection Checklist

Gamble Group Health and Safety Site Inspection