Template

Dynamic Underground Safety Live Audits SA002

by Waqas Hashmi, from the Community

Use this SA002 Underground Safety Live Audit checklist to conduct real-time audits of underground works and confined space access. Verify on-site risk assessments, PPE, vehicle positioning, and site barriers. Check gas detection unit condition and use, perform full gas testing at chamber entry points, and review correct manhole cover removal methods. Capture photos, record observations, and ensure chambers are left safe. Conclude with sign-off from the engineer and auditor.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
MS3 Live Audit - Underground Works
Conduct real-time audits of telecom underground works with a structured checklist aligned to MS3 and BT Openreach requirements. Verify safe vehicle positioning, Chapter 8 signing and guarding, correct chamber entry and lifting methods, gas testing at all levels, GDU placement, and water tests. Confirm cable securing and labeling to specification, equipment condition and test dates, and site condition on completion. Capture photos, supervisors, qualifications, and complete final sign-off.
by Matthew Morton, from the Community
Downloads: 0
Get
Template
Underground Site Safety Inspection Checklist
This underground construction site inspection checklist helps crews and supervisors audit safety and compliance across critical areas of underground work. Review traffic control measures, safety meetings, risk assessments, and communications. Verify mobile equipment training, pre-shift inspections, alarms, and housekeeping. Check utility identification, spotter use, PPE, trenching and excavation controls, and confined space permits and gear. Cover environmental controls such as SWPPP, dust, and track-out, plus lifting and rigging, subcontractor compliance, site access and egress, maintenance practices, and first aid and SDS availability.
by Rich Kauss, from the Community
Downloads: 0
Get
Template
Dynamic Live Site Audit for Splicers
This dynamic live site audit checklist helps supervisors and engineers evaluate telecom splicing works on active sites. It covers pre-work checks, PPE, roadwork signage chapter 8, equipment setup and grounding, GDU use, ladder and guarding inspections, safe chamber entry and gas testing, working in chamber controls, cable securing and labeling, housekeeping, and final sign off. Capture photos, note observations, and verify qualifications to maintain safety and compliance on fiber and copper splicing jobs.
by Waqas Hashmi, from the Community
Downloads: 0
Get
Template
Underground Construction Safety Checklist
This underground construction checklist supports leadership discussions and daily safety planning. It covers pre task planning and daily huddles, emergency plans and orientation for new employees, utility locates for overhead and underground lines, traffic control and parking, trench safety and soil type, rescue readiness, lockout tagout, confined space entry with gas monitoring, chains and slings inspections, power and hand tool checks, PPE compliance, fire safety, site security, erosion control, and final sign offs. Use it to document issues, add photos, and capture signatures.
by Tyler Myrom, from the Community
Downloads: 20+
Get

MS3 Live Audit - Underground Works

Conduct real-time audits of telecom underground works with a structured checklist aligned to MS3 and BT Openreach requirements. Verify safe vehicle positioning, Chapter 8 signing and guarding, correct chamber entry and lifting methods, gas testing at all levels, GDU placement, and water tests. Confirm cable securing and labeling to specification, equipment condition and test dates, and site condition on completion. Capture photos, supervisors, qualifications, and complete final sign-off.

by Matthew Morton, from the Community

Get

Template

Underground Site Safety Inspection Checklist

This underground construction site inspection checklist helps crews and supervisors audit safety and compliance across critical areas of underground work. Review traffic control measures, safety meetings, risk assessments, and communications. Verify mobile equipment training, pre-shift inspections, alarms, and housekeeping. Check utility identification, spotter use, PPE, trenching and excavation controls, and confined space permits and gear. Cover environmental controls such as SWPPP, dust, and track-out, plus lifting and rigging, subcontractor compliance, site access and egress, maintenance practices, and first aid and SDS availability.

by Rich Kauss, from the Community

Get

Template

Dynamic Live Site Audit for Splicers

This dynamic live site audit checklist helps supervisors and engineers evaluate telecom splicing works on active sites. It covers pre-work checks, PPE, roadwork signage chapter 8, equipment setup and grounding, GDU use, ladder and guarding inspections, safe chamber entry and gas testing, working in chamber controls, cable securing and labeling, housekeeping, and final sign off. Capture photos, note observations, and verify qualifications to maintain safety and compliance on fiber and copper splicing jobs.

by Waqas Hashmi, from the Community

Get

Template

Underground Construction Safety Checklist

This underground construction checklist supports leadership discussions and daily safety planning. It covers pre task planning and daily huddles, emergency plans and orientation for new employees, utility locates for overhead and underground lines, traffic control and parking, trench safety and soil type, rescue readiness, lockout tagout, confined space entry with gas monitoring, chains and slings inspections, power and hand tool checks, PPE compliance, fire safety, site security, erosion control, and final sign offs. Use it to document issues, add photos, and capture signatures.

by Tyler Myrom, from the Community

20+

Get

Dynamic Underground Safety Live Audits SA002

About author

You might also like

MS3 Live Audit - Underground Works

Underground Site Safety Inspection Checklist

Dynamic Live Site Audit for Splicers

Underground Construction Safety Checklist

You might also like

MS3 Live Audit - Underground Works

Underground Site Safety Inspection Checklist

Dynamic Live Site Audit for Splicers

Underground Construction Safety Checklist