Template

4th Utility Walk Off Report CGI V1

by Admin User, from the Community

Use this 4th Utility Walk Off Report CGI V1 to document fiber installation completion and quality. The checklist covers headend cabinet setup and labeling, splitter panel and fiber tray, power and EAD status, and FDP installation, labeling, and splicing. It also includes housekeeping items such as firestopping, cable routes, containment, non combustible fixings, hallway clips with white mastic, and POE placement and splicing. Record 1490 nm test results for splitter legs, add media evidence, and capture engineer sign off and comments.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
BRSK Fiber Site Walk Off Report
This site walk off report template is designed for BRSK fiber builds to document completion quality before handover. Inspect splitter boxes for correct location, labeling, and neat splicing; record units spliced and any connected FDPs. Verify FDP installation and labeling against the job pack. Check cable routes for compliance, use of non combustible fixings, containment, and correct hallway clips and mastic when using Invisilight or internal cable. Review PoE locations, splicing quality, and test levels, and ensure results are sent to BRSK. Confirm appropriate fire stopping materials are used and the fire stopping report is submitted. Capture photo evidence throughout and complete engineer sign off.
by Admin User, from the Community
Downloads: 0
Get
Template
PON HZ Splicing Report
Use this PON HZ splicing report template to document fiber network build and maintenance work. Record site details, job type, cabinet and tray installation, FDP and BFP locations, splitter counts and serial numbers, fiber elements and colors, and connections from node to building. Add photos of cabinets, splitters, and spliced fibers, note changes to path, and confirm fire clips and testing for points of entry and customer service points. Capture test results and readings, RFS status, and sign off with comments and splicer signature to ensure traceable telecom quality.
by C&C Data, from the Community
Downloads: 0
Get
Template
FTTH Splicing Audit Checklist
This FTTH splicing audit checklist helps telecom field teams document and verify fiber optic work quality. Capture site information, job references, and walk-off dates. Record SN and ASN details with photos of closed and open cabinets. Include images of splice trays before and after labeling, hydra cables or pigtails, and the splicing schedule. Track which fibers were spliced, whether a splitter was installed, and provide splitter photos. Document DP location with internal photos, confirm pre-con blown fiber installation, and attach splicing photos. Verify POE installations with internal images, add notes, and complete sign-off to standardize quality and compliance across FTTH installs.
by Andy Holland, from the Community
Downloads: 0
Get
Template
C-OLT Splicing Report Template
Use this C-OLT splicing report template to document fiber optic works at the enclosure and OLT. Capture site and customer details, C-OLT location, splice to splitter pigtails, loss confirmation, cleaning and labeling checks, and cable management. Record enclosure number, location, tray number, and tray status, plus splitter serial number and photos. Verify a 1:16 splitter install, OTDR and red light tests, and that results are uploaded. Log POE or CSP installation and testing, fire clips, and bend management. Include technician signature, date, and site completion confirmation.
by C&C Data, from the Community
Downloads: 0
Get

BRSK Fiber Site Walk Off Report

This site walk off report template is designed for BRSK fiber builds to document completion quality before handover. Inspect splitter boxes for correct location, labeling, and neat splicing; record units spliced and any connected FDPs. Verify FDP installation and labeling against the job pack. Check cable routes for compliance, use of non combustible fixings, containment, and correct hallway clips and mastic when using Invisilight or internal cable. Review PoE locations, splicing quality, and test levels, and ensure results are sent to BRSK. Confirm appropriate fire stopping materials are used and the fire stopping report is submitted. Capture photo evidence throughout and complete engineer sign off.

by Admin User, from the Community

Get

Template

PON HZ Splicing Report

Use this PON HZ splicing report template to document fiber network build and maintenance work. Record site details, job type, cabinet and tray installation, FDP and BFP locations, splitter counts and serial numbers, fiber elements and colors, and connections from node to building. Add photos of cabinets, splitters, and spliced fibers, note changes to path, and confirm fire clips and testing for points of entry and customer service points. Capture test results and readings, RFS status, and sign off with comments and splicer signature to ensure traceable telecom quality.

by C&C Data, from the Community

Get

Template

FTTH Splicing Audit Checklist

This FTTH splicing audit checklist helps telecom field teams document and verify fiber optic work quality. Capture site information, job references, and walk-off dates. Record SN and ASN details with photos of closed and open cabinets. Include images of splice trays before and after labeling, hydra cables or pigtails, and the splicing schedule. Track which fibers were spliced, whether a splitter was installed, and provide splitter photos. Document DP location with internal photos, confirm pre-con blown fiber installation, and attach splicing photos. Verify POE installations with internal images, add notes, and complete sign-off to standardize quality and compliance across FTTH installs.

by Andy Holland, from the Community

Get

Template

C-OLT Splicing Report Template

Use this C-OLT splicing report template to document fiber optic works at the enclosure and OLT. Capture site and customer details, C-OLT location, splice to splitter pigtails, loss confirmation, cleaning and labeling checks, and cable management. Record enclosure number, location, tray number, and tray status, plus splitter serial number and photos. Verify a 1:16 splitter install, OTDR and red light tests, and that results are uploaded. Log POE or CSP installation and testing, fire clips, and bend management. Include technician signature, date, and site completion confirmation.

by C&C Data, from the Community

Get

4th Utility Walk Off Report CGI V1

About author

You might also like

BRSK Fiber Site Walk Off Report

PON HZ Splicing Report

FTTH Splicing Audit Checklist

C-OLT Splicing Report Template

You might also like

BRSK Fiber Site Walk Off Report

PON HZ Splicing Report

FTTH Splicing Audit Checklist

C-OLT Splicing Report Template