Template

SFG20 External Lighting and Illuminated Signs Checklist

by Patrick Robinson, from the Community

This SFG20-based checklist helps facilities teams inspect and maintain external lighting and illuminated signs. It covers lamp condition, lux level measurements, switch and contactor operation, control gear checks, timer functionality, signage integrity, corrosion, and like-for-like replacements. It also includes guidance on safe disposal and re-processing of tubes, mandatory photo evidence, and structured pass or fail recording to keep assets safe and compliant.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template
Emergency Lighting and SFG20 Maintenance Checklist
This SFG20-aligned inspection checklist helps facilities and building services teams maintain emergency and general lighting, hand dryers, and battery charging equipment. It covers full-duration emergency lighting tests, restoration checks, visual inspections of luminaires, logbook entries, and battery life verification. For general lighting, it includes lamp condition checks across LED, fluorescent, discharge, and tungsten types; illuminance verification; security fixings; cable connections; control gear; switching; and timing. Hand dryer steps include wiring, insulation resistance, earth continuity, and motor bearing checks. Battery charging equipment tasks cover cleaning, corrosion, insulation, fixings, contacts, cable and gland terminations, and indicator/ammeter/voltmeter operation. Use this template to standardize PPM, capture issues with photos and notes, and support compliance.
by Patrick Robinson, from the Community
Downloads: 0
Get
Template
Emergency Lighting Checklist
This emergency lighting checklist helps facilities teams inspect exit signs and emergency luminaires. Record visual and operational checks, document issues, and track corrective actions to keep sites compliant and safe. Use it to standardize routine inspections, verify visibility and functionality, and maintain records for audits.
by Mark Gunther, from the Community
Downloads: 20+
Get
Template
Back of House Fire Corridors Checklist
Use this checklist to verify back-of-house fire corridors are safe and compliant. Inspect clear egress from entry to exit, condition and locking of fire doors, illuminated exit signage, corridor lighting, spills and slip hazards, visible hazards, and rubbish removal. Confirm emergency contact signage is posted. Assess plant rooms for door condition, functioning locks, adequate lighting, illuminated exit signs, obstruction-free access, and cleanliness. Attach photos and record completion details and sign-off.
by Marcus Coombe, from the Community
Downloads: 10+
Get
Template
MEI Facilities Safety Inspection Checklist
This comprehensive facilities safety checklist supports routine inspections across key areas of a site. It covers emergency exits and alarms, electrical safety, housekeeping, walking surfaces and stairways, lighting, chemical labeling and MSDS awareness, PPE selection and use, ladders, storage practices, machine and tool operation including guarding and lockout tagout, sprinkler clearance, eyewash and emergency shower testing, emergency lights and illuminated exit signs, elevator function checks, and exterior building and lot inspections. Use it to document findings, verify compliance, and keep facilities safe and operational.
by joe coggins, from the Community
Downloads: 0
Get

Emergency Lighting and SFG20 Maintenance Checklist

This SFG20-aligned inspection checklist helps facilities and building services teams maintain emergency and general lighting, hand dryers, and battery charging equipment. It covers full-duration emergency lighting tests, restoration checks, visual inspections of luminaires, logbook entries, and battery life verification. For general lighting, it includes lamp condition checks across LED, fluorescent, discharge, and tungsten types; illuminance verification; security fixings; cable connections; control gear; switching; and timing. Hand dryer steps include wiring, insulation resistance, earth continuity, and motor bearing checks. Battery charging equipment tasks cover cleaning, corrosion, insulation, fixings, contacts, cable and gland terminations, and indicator/ammeter/voltmeter operation. Use this template to standardize PPM, capture issues with photos and notes, and support compliance.

by Patrick Robinson, from the Community

Get

Template

Emergency Lighting Checklist

This emergency lighting checklist helps facilities teams inspect exit signs and emergency luminaires. Record visual and operational checks, document issues, and track corrective actions to keep sites compliant and safe. Use it to standardize routine inspections, verify visibility and functionality, and maintain records for audits.

by Mark Gunther, from the Community

20+

Get

Template

Back of House Fire Corridors Checklist

Use this checklist to verify back-of-house fire corridors are safe and compliant. Inspect clear egress from entry to exit, condition and locking of fire doors, illuminated exit signage, corridor lighting, spills and slip hazards, visible hazards, and rubbish removal. Confirm emergency contact signage is posted. Assess plant rooms for door condition, functioning locks, adequate lighting, illuminated exit signs, obstruction-free access, and cleanliness. Attach photos and record completion details and sign-off.

by Marcus Coombe, from the Community

10+

Get

Template

MEI Facilities Safety Inspection Checklist

This comprehensive facilities safety checklist supports routine inspections across key areas of a site. It covers emergency exits and alarms, electrical safety, housekeeping, walking surfaces and stairways, lighting, chemical labeling and MSDS awareness, PPE selection and use, ladders, storage practices, machine and tool operation including guarding and lockout tagout, sprinkler clearance, eyewash and emergency shower testing, emergency lights and illuminated exit signs, elevator function checks, and exterior building and lot inspections. Use it to document findings, verify compliance, and keep facilities safe and operational.

by joe coggins, from the Community

Get

SFG20 External Lighting and Illuminated Signs Checklist

About author

You might also like

Emergency Lighting and SFG20 Maintenance Checklist

Emergency Lighting Checklist

Back of House Fire Corridors Checklist

MEI Facilities Safety Inspection Checklist

You might also like

Emergency Lighting and SFG20 Maintenance Checklist

Emergency Lighting Checklist

Back of House Fire Corridors Checklist

MEI Facilities Safety Inspection Checklist