Template

SABRE Fire Sprinkler Audit Checklist

by Kyle Black, from the Community

20+

Use this SABRE Fire Sprinkler Audit to perform routine inspections of water-based fire protection systems. Based on NFPA 13D and NFPA 25 and adapted from AFSA Form 94-106A, the checklist covers gauges, control and backflow valves, tamper switches, pressure regulating and relief valves, alarm checks, trim and piping, FDC components, hydrants, and heating in wet areas. Record readings, note deficiencies, and verify the system is left in service with clear documentation for corrective actions.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

Annual Sprinkler and Standpipe Inspection Report

Conduct comprehensive annual inspections of building sprinkler and standpipe systems with this template. Capture general site details, central supervision, and device information. Document fire department connections, incoming water size, fire pumps, jockey pump pressures, and backflow preventers with test history and pass or fail status. Record system configurations for wet, dry, glycol, and pre-action systems, including flow and pressure switches, alarm valves, and excess pressure pumps. Track supervisory devices, reserve sprinkler heads and tools, and required spare heads. Perform NFPA 13 static and residual water pressure tests using nearby hydrants and log results. Include a fire alarm inspection record, photos, comments, and a deficiency report to ensure corrective actions and compliance.

by James MacDonald, from the Community

30+

Get

Template

Kaiser Quarterly Fire Sprinkler Inspection

Use this checklist to perform a quarterly inspection of Kaiser fire sprinkler systems across bays and buildings. Record audit details, site location, personnel, and the quarter. Identify area of inspection by bay or building, and document system number and type. Capture air and water pressure readings. Complete semi-annual functional tests for pneumatic detectors, control panels, supervisory alarms, and manual actuation stations. Verify control valves are sealed open, accessible, and correctly tagged; confirm trim piping is leak tight and the alarm test valve is closed. Check panels are clear, tamper switch response time, and that the system is left in service. Note trouble areas such as no water flow, alarm delay, drainage, or reset issues.

by Wm Jay Mather, from the Community

10+

Get

Template

SABRE 5 S AUDIT CHECKLIST

by Travis Belleville, from the Community

60+

Get

Template

MSU Sprinkler Inspection Report

This monthly sprinkler inspection template supports facilities teams in assessing wet, dry, and pre-action fire protection systems. It guides you to record locations and coverage, check supply and system pressure gauges, confirm systems are in service, verify valve accessibility and signage, assess backflow devices, compressor operation, alarm test and line valves, leak tightness, and low point drum drip drainage. It also covers sprinkler heads, spare head cabinets, head wrenches, temperature ratings, and Fire Department Connection visibility and access.

by Wilson Robles, from the Community

10+

Get

Monthly Fire Sprinkler Maintenance Check

Template

Monthly Fire Sprinkler Maintenance Check

This monthly fire sprinkler maintenance checklist helps facilities teams document routine inspections and tests to keep fire protection systems reliable and compliant. It guides users to check sprinkler tanks and batteries, confirm water and air pressure gauges and water levels, verify stop valve positions, and perform a 30-second flow alarm test. It also covers automatic pump start tests, diesel engine restart checks, trace heating verification, and confirming connections to the fire and rescue service and remote monitoring stations. Include evidence, record results, and complete sign-off by competent personnel.

by SafetyCulture

10+

Get

Template

Fire Sprinkler System Acceptance Test

This fire sprinkler system acceptance test checklist helps contractors, inspectors, and facility teams commission new or modified systems to code. Based on 2018 IFC and NFPA 13, it covers riser rooms and components, piping and hanger installation, sprinkler head type, spacing, and obstructions, fire department connections, and required tests including hydrostatic, pneumatic, and operational checks. It also guides documentation such as as-built plans and aboveground material and test certificates, and captures inspection status and next steps. Use it to standardize inspections, record results, and demonstrate compliance.

by Paul Ayres, from the Community

Get