Template

Pressurisation Unit Servicing Checklist

by Liam Williams, from the Community

Use this servicing checklist to maintain building pressurisation units safely and efficiently. Steps include confirming closed valve pressure, cleaning and testing the pressure reducing valve, checking high and low pressure switches, recording cut in, cut out and differential pressures, verifying NRV function, inspecting for corrosion or damage, testing pump operation, assessing the expansion vessel, and confirming overall controls and functionality. Capture before and after photos and add notes, then complete the service summary for records.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Water Heater Service Checklist
This water heater service checklist guides technicians through essential maintenance tasks for domestic or commercial systems. Steps include testing expansion and temperature pressure relief valves, verifying discharge pipework, checking immersion heater operation and temperature control, charging the expansion vessel to the correct pressure, cleaning inlet control mesh filters and line strainers, inspecting anodes, confirming pressure reducing valve settings, and recording results. Designed for Kingspan and Ariston water heaters, the checklist helps ensure safe operation, compliance, and accurate service records for properties such as apartments or multi story buildings.
by Michael Millington, from the Community
Downloads: 0
Get
Template
Wet Riser Pump System Test Checklist
This weekly wet riser pump system test checklist helps facilities teams maintain fire protection readiness and compliance. Steps include inspecting the water storage tank and level indicators, confirming ball valve operation, and checking access safety. In the pump house, confirm it is clear of storage and that temperatures remain within specified limits. For the jockey pump and electric pumps, simulate pressure reduction to verify automatic cut-in pressures, then restore valves to normal. Run the electric pump, verify visual and audible alarms at remote panels, and test manual start and stop from the controller. Record observations and sign-off to document maintenance and ensure building safety.
by Mauricio Silva, from the Community
Downloads: 0
Get
Template
Mitsubishi HVAC Servicing Sheet
This Mitsubishi HVAC servicing sheet is designed for routine maintenance of air-to-water heat pump systems and related hydronic components. It guides technicians through checks for unit casing damage, heat exchanger cleaning and fin condition, adequate outdoor air discharge, fan vibration and noise, drain blockages, and electrical isolating switch integrity. Tasks include inspecting for refrigerant leaks, verifying insulation on refrigeration piping, confirming secure PCB connections, and checking normal operating pressures. Hydronic steps cover measuring water pressure, assessing circulating pump operation, testing hydro box and tank pressure relief valves, cleaning the water strainer, and inspecting water piping and DHW tank condition. It also prompts verification of thermal protectors, 2/3 port valve operation, heating and hot water set points, controller time/day settings, and external programmable thermostat function, with sections for repairs and comments.
by s b, from the Community
Downloads: 10+
Get
Template
Mains Pressure Hot Water Storage Service Report
Use this mains pressure hot water storage system service report to capture customer and site details, cylinder make, model and serial number, engineer and company info, and service date. Record primary circuit type and maximum primary flow temperature, incoming static cold water pressure, strainer cleaning, water hardness and scale reduction, thermostat setpoint, maximum hot water flow rate, solar compatibility, nearest outlet temperature, and pipe insulation. For unvented systems, log location and setting of the pressure reducing valve, test temperature and pressure relief and expansion valves, verify tundish and discharge pipework comply with Part G, confirm energy source cut-out devices, and check expansion vessel or air gap. For thermal stores, note achievable store and maximum hot water temperatures. Confirm compliance with Building Regulations and manufacturer instructions, demonstrate controls to the customer, and capture engineer comments, parts used, and signatures.
by Curtis Simpson, from the Community
Downloads: 0
Get

Pressurisation Unit Servicing Checklist

About author

You might also like

Water Heater Service Checklist

Wet Riser Pump System Test Checklist

Mitsubishi HVAC Servicing Sheet

Mains Pressure Hot Water Storage Service Report

You might also like

Water Heater Service Checklist

Wet Riser Pump System Test Checklist

Mitsubishi HVAC Servicing Sheet

Mains Pressure Hot Water Storage Service Report