Template

Pre Validation Emergency Lighting Audit

by jay hammond, from the Community

10+

Use this pre validation emergency lighting audit to assess the condition and compliance of an existing installation before refurbishment. Verify defect free fittings, adequate coverage for the proposed layout, lux levels along escape routes, illuminated exit signage, and provision above boards and risers. Capture fitting schedules, battery and inverter details, key switching, visual condition of wiring, and 3 hour test results with photos and notes.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template
AGL 2022 Pre-Validation Emergency Lighting Audit
Use this pre-validation emergency lighting audit to assess the condition and compliance of existing installations before refurbishment. The checklist guides engineers through objectives, disclaimers, and document details, then captures site-specific checks such as WC requirements, corridor and escape route lighting, lux levels, and illuminated exit signage. Record fitting schedules with make and model, lamp and battery details, maintained or non-maintained status, inverters and ballasts, and capture supporting images. Verify key switching, distribution board coverage, visual condition of fittings and wiring, and three-hour test outcomes to ensure readiness for certification and building control compliance.
by jay hammond, from the Community
Downloads: 10+
Get
Template
Back of House Fire Corridors Checklist
Use this checklist to verify back-of-house fire corridors are safe and compliant. Inspect clear egress from entry to exit, condition and locking of fire doors, illuminated exit signage, corridor lighting, spills and slip hazards, visible hazards, and rubbish removal. Confirm emergency contact signage is posted. Assess plant rooms for door condition, functioning locks, adequate lighting, illuminated exit signs, obstruction-free access, and cleanliness. Attach photos and record completion details and sign-off.
by Marcus Coombe, from the Community
Downloads: 10+
Get
Template
AGL 2022 Pre-Validation Electrical Checklist
This electrical pre-validation checklist helps assess the condition and compliance of existing installations before refurbishment works begin. It guides engineers through site survey details, lighting control systems, PIR sensors, ceiling and floor voids, and routes for new services. It includes thorough distribution board and riser inspections, labeling and safety requirements, RCD presence and testing, surge protection types, cable management, termination quality, torque checks, overheating signs, and bonding to services and structural steel. The checklist also covers visual inspections of sockets, isolators, light fittings, switches, floor boxes, LCMs, and comms cabinets, plus measurements, photos, and notes to document findings. Use it to determine suitability for continued use, identify defects, and plan any upgrades needed to meet current standards.
by jay hammond, from the Community
Downloads: 10+
Get
Template
Emergency and Exit Lighting Audit Checklist (V2)
This V2 Emergency and Exit Lighting Audit checklist helps assess building compliance and safe egress. Inspect the presence and coverage of emergency and exit lights, signage at exit doors, and paths of egress. Review switchboards for dedicated emergency lighting circuits, RCBO protection, and EEL test switches. Confirm the availability of emergency lighting logbooks and record maintenance details. Document findings, determine if upgrades are required, estimate technicians needed, note access equipment and height requirements, and provide detailed recommendations. Includes sign-off for works completed.
by Total Protection, from the Community
Downloads: 10+
Get

AGL 2022 Pre-Validation Emergency Lighting Audit

Use this pre-validation emergency lighting audit to assess the condition and compliance of existing installations before refurbishment. The checklist guides engineers through objectives, disclaimers, and document details, then captures site-specific checks such as WC requirements, corridor and escape route lighting, lux levels, and illuminated exit signage. Record fitting schedules with make and model, lamp and battery details, maintained or non-maintained status, inverters and ballasts, and capture supporting images. Verify key switching, distribution board coverage, visual condition of fittings and wiring, and three-hour test outcomes to ensure readiness for certification and building control compliance.

by jay hammond, from the Community

10+

Get

Template

Back of House Fire Corridors Checklist

Use this checklist to verify back-of-house fire corridors are safe and compliant. Inspect clear egress from entry to exit, condition and locking of fire doors, illuminated exit signage, corridor lighting, spills and slip hazards, visible hazards, and rubbish removal. Confirm emergency contact signage is posted. Assess plant rooms for door condition, functioning locks, adequate lighting, illuminated exit signs, obstruction-free access, and cleanliness. Attach photos and record completion details and sign-off.

by Marcus Coombe, from the Community

10+

Get

Template

AGL 2022 Pre-Validation Electrical Checklist

This electrical pre-validation checklist helps assess the condition and compliance of existing installations before refurbishment works begin. It guides engineers through site survey details, lighting control systems, PIR sensors, ceiling and floor voids, and routes for new services. It includes thorough distribution board and riser inspections, labeling and safety requirements, RCD presence and testing, surge protection types, cable management, termination quality, torque checks, overheating signs, and bonding to services and structural steel. The checklist also covers visual inspections of sockets, isolators, light fittings, switches, floor boxes, LCMs, and comms cabinets, plus measurements, photos, and notes to document findings. Use it to determine suitability for continued use, identify defects, and plan any upgrades needed to meet current standards.

by jay hammond, from the Community

10+

Get

Template

Emergency and Exit Lighting Audit Checklist (V2)

This V2 Emergency and Exit Lighting Audit checklist helps assess building compliance and safe egress. Inspect the presence and coverage of emergency and exit lights, signage at exit doors, and paths of egress. Review switchboards for dedicated emergency lighting circuits, RCBO protection, and EEL test switches. Confirm the availability of emergency lighting logbooks and record maintenance details. Document findings, determine if upgrades are required, estimate technicians needed, note access equipment and height requirements, and provide detailed recommendations. Includes sign-off for works completed.

by Total Protection, from the Community

10+

Get

Pre Validation Emergency Lighting Audit

About author

You might also like

AGL 2022 Pre-Validation Emergency Lighting Audit

Back of House Fire Corridors Checklist

AGL 2022 Pre-Validation Electrical Checklist

Emergency and Exit Lighting Audit Checklist (V2)

You might also like

AGL 2022 Pre-Validation Emergency Lighting Audit

Back of House Fire Corridors Checklist

AGL 2022 Pre-Validation Electrical Checklist

Emergency and Exit Lighting Audit Checklist (V2)