Template

PH Wheel Loader Pre PM Checklist

by Roy Pennock, from the Community

10+

Use this pre PM checklist to assess PH wheel loaders before maintenance. Cover cab and topside condition, lights, safety and fire systems, cameras, steering and brakes. Run operational tests for hoist, bucket, cycle times, air and pump pressures. Inspect engine, hydraulics, wiring, frames, axles, tires, lift arms, bucket and high voltage cabinet. Record defects, photos and notes for timely repair.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Underground LHD Inspection Checklist
Use this underground LHD inspection template to evaluate loader safety and performance before returning to service. The checklist covers cab and controls, brakes and accumulators, hydraulics and steering, engine and transmission, axles and driveline, lights and electrics, tires and rims, fire suppression, and documentation. Record pressures, temperatures, serial numbers, and defects, run functional tests, and verify ROPS and FOPS and emergency systems. Ideal for underground mining maintenance teams seeking reliable, compliant equipment.
by QUINTEN NGAROPO, from the Community
Downloads: 10+
Get
Template
Loader Pre Start Inspection Checklist
Use this loader pre start inspection checklist to document daily safety and condition checks on heavy equipment. Verify bucket wear bits and cutting edge, pivot pins and grease points, lift and tilt cylinders, and hydraulic hoses. Review steps and handholds, warning devices, mirrors and glass, cab lights and cab securement. Check tires and wheels, fluid levels including oil, hydraulic and coolant, and look for engine, hydraulic and fuel leaks. Confirm belts and driveline condition. Inside the cab, confirm cleanliness, presence of the owners manual, fire extinguisher, safety decals, and that switches and lights function. Record general equipment condition and capture photos when repairs are required. Designed for oilfield and energy sites and suitable for construction and maintenance teams.
by Brent Walker, from the Community
Downloads: 20+
Get
Template
Pre-Trip Inspection Checklist
Use this pre-trip inspection checklist to perform a thorough walkaround and in-cab check before operating a commercial truck and trailer. Inspect plates, lights, engine components, steering, suspension, brakes, tires, rims, fuel system, coupling and fifth wheel, landing gear, and trailer axles. Verify safety equipment, conduct parking and service brake tests, and confirm air system recovery to meet DOT compliance.
by Phillipp User, from the Community
Downloads: 30+
Get
Template
Wheeled Loading Shovel Daily Inspection Checklist
Use this daily plant inspection checklist to keep wheeled loading shovels safe and job ready. It covers a full walkaround and visual static check, tyres and wheel nuts, access steps and handrails, pivot pins and steering rams, loader arms and wear, hydraulic hoses and rams, bucket or attachment security and condition, glazing, mirrors and lights, cosmetic damage, greasing, and fire suppression. Check engine and hydraulic compartments for oil, fuel, coolant, AdBlue and transmission levels, air filters, radiators and belts, and battery isolator. In cab checks include seat, seatbelt, operator manual, visibility and door. Functional tests cover lights, horn, beacons, reversing camera, bleeper, wipers, hydraulics, steering and brakes, with defects and operator signature captured.
by jon Hillyard, from the Community
Downloads: 0
Get

Underground LHD Inspection Checklist

Use this underground LHD inspection template to evaluate loader safety and performance before returning to service. The checklist covers cab and controls, brakes and accumulators, hydraulics and steering, engine and transmission, axles and driveline, lights and electrics, tires and rims, fire suppression, and documentation. Record pressures, temperatures, serial numbers, and defects, run functional tests, and verify ROPS and FOPS and emergency systems. Ideal for underground mining maintenance teams seeking reliable, compliant equipment.

by QUINTEN NGAROPO, from the Community

10+

Get

Template

Loader Pre Start Inspection Checklist

Use this loader pre start inspection checklist to document daily safety and condition checks on heavy equipment. Verify bucket wear bits and cutting edge, pivot pins and grease points, lift and tilt cylinders, and hydraulic hoses. Review steps and handholds, warning devices, mirrors and glass, cab lights and cab securement. Check tires and wheels, fluid levels including oil, hydraulic and coolant, and look for engine, hydraulic and fuel leaks. Confirm belts and driveline condition. Inside the cab, confirm cleanliness, presence of the owners manual, fire extinguisher, safety decals, and that switches and lights function. Record general equipment condition and capture photos when repairs are required. Designed for oilfield and energy sites and suitable for construction and maintenance teams.

by Brent Walker, from the Community

20+

Get

Template

Pre-Trip Inspection Checklist

Use this pre-trip inspection checklist to perform a thorough walkaround and in-cab check before operating a commercial truck and trailer. Inspect plates, lights, engine components, steering, suspension, brakes, tires, rims, fuel system, coupling and fifth wheel, landing gear, and trailer axles. Verify safety equipment, conduct parking and service brake tests, and confirm air system recovery to meet DOT compliance.

by Phillipp User, from the Community

30+

Get

Template

Wheeled Loading Shovel Daily Inspection Checklist

Use this daily plant inspection checklist to keep wheeled loading shovels safe and job ready. It covers a full walkaround and visual static check, tyres and wheel nuts, access steps and handrails, pivot pins and steering rams, loader arms and wear, hydraulic hoses and rams, bucket or attachment security and condition, glazing, mirrors and lights, cosmetic damage, greasing, and fire suppression. Check engine and hydraulic compartments for oil, fuel, coolant, AdBlue and transmission levels, air filters, radiators and belts, and battery isolator. In cab checks include seat, seatbelt, operator manual, visibility and door. Functional tests cover lights, horn, beacons, reversing camera, bleeper, wipers, hydraulics, steering and brakes, with defects and operator signature captured.

by jon Hillyard, from the Community

Get

PH Wheel Loader Pre PM Checklist

About author

You might also like

Underground LHD Inspection Checklist

Loader Pre Start Inspection Checklist

Pre-Trip Inspection Checklist

Wheeled Loading Shovel Daily Inspection Checklist

You might also like

Underground LHD Inspection Checklist

Loader Pre Start Inspection Checklist

Pre-Trip Inspection Checklist

Wheeled Loading Shovel Daily Inspection Checklist