Template

MBS QA 1.4 Copper Pipework and Fittings Checklist

by Danny Denton, from the Community

This MBS QA 1.4 checklist helps verify copper pipework and fittings are installed to specification. It covers levels and falls, supports and anchoring, valves and ancillaries, flexible connections, venting and draining, anti vibration supports, test plugs, pressure gauges and thermometers, servicing valves, joint quality, control items, end sealing during installation, pressure testing and witnessing, labeling, and sign off by contractor and client. Use it to document compliance, capture photos and notes, and maintain a clear record for handover and maintenance.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template
Pipework Visual Inspection Checklist
Use this pipework visual inspection checklist to conduct weekly plant checks on building mechanical systems. Verify supports, spacing, routing against drawings, pipe sizes and materials, sound joints and welds, allowance for expansion, and correct venting and draining. Confirm sleeves and fire stopping are fitted, paint is complete, isolating and commissioning valves are installed per specification, and strainers and flexible connections are in place. Check fan coil unit connections and overall insulation quality. Add notes and photos where issues are found and capture site manager sign-off.
by Simon Brier, from the Community
Downloads: 20+
Get
Template
MBS QA M 1.5 Plastic Ductwork Checklist
This MBS QA M 1.5 Plastic Ductwork Checklist supports quality assurance for HVAC installations. It covers compliance with specifications, delivery condition and protection, correct levels, secure supports with allowance for insulation and vapor seals, and fitting of turning vanes, splitters, dampers, flexible connections, and motorised dampers. It includes checks for correctly fitted and reset fire dampers with access doors, proper installation of controls and actuators, protection of open ends, correct labeling of valves, grille and diffuser installation, and final testing. Sections capture project details and require contractor and client sign-off.
by Danny Denton, from the Community
Downloads: 0
Get
Template
Pipework Pressure Test Checklist
Use this pipework pressure test checklist to document key information during pressure testing of new or existing pipe systems. Record test type, installation and system details, test pressures at the start and after 1 hour, and capture signatures from the testing operative, customer, and a Vital Energi supervisor or manager. This structured form supports quality assurance, commissioning, and compliance for mechanical and piping works on construction and infrastructure projects.
by Chris Robertson, from the Community
Downloads: 10+
Get
Template
Pre Handover Checklist
Use this pre handover checklist to verify key services and finishes before client sign-off. It covers external rainwater goods and taps, boiler flues and condensate, ASHP installation, compression fittings and lagging, neat pipework at the kitchen sink, cylinder cupboard labeling and insulation, correct heating pressure, and hot water temperature. Inspect radiators and towel rails for level, TRV placement, and tight valves. Check sanitaryware for level, leaks, secure fittings, and service valves; test bath overflow and TMV temperature; verify showers, trays, doors, and silicone seals. Confirm loft SVPs connect to tile vents and are above insulation. Use this to reduce defects, capture issues, and streamline commissioning and handover.
by jake emery, from the Community
Downloads: 0
Get

MBS QA 1.4 Copper Pipework and Fittings Checklist

About author

You might also like

Pipework Visual Inspection Checklist

MBS QA M 1.5 Plastic Ductwork Checklist

Pipework Pressure Test Checklist

Pre Handover Checklist

You might also like

Pipework Visual Inspection Checklist

MBS QA M 1.5 Plastic Ductwork Checklist

Pipework Pressure Test Checklist

Pre Handover Checklist