Template

Service Line Installation Audit Checklist 2018

by Benjamin Rodgers, from the Community

This audit checklist supports safe, compliant gas service line installation work. It covers work zone setup and traffic control, flagging operations, PPE, excavation and trench safety, electrical safety, tool and equipment checks, DOT vehicle and load securement, ergonomics, hazmat handling, fire protection, environmental controls, and hazard communication. Technical sections address abandoning old services, pipe separation, new service installation requirements including depth, tracer wire, marker balls, warning tape, and sewer locate practices to prevent cross bores. It details meter and regulator set installation, pipe joining by electrofusion and socket fusion, mechanical fittings, pressure testing at 1.5 times MAOP with leak checks, tapping pipelines into service, corrosion control with anodes and exothermic welds, backfilling, and final documentation.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
QC60 Gas Technical Audit and Inspection Checklist
The QC60 Gas Technical Audit and Inspection checklist supports audits of gas utility works across the full lifecycle of street works and mains services. Sections cover documentation, qualifications, and permits; site housekeeping and PPE; signing, lighting, and guarding to Red Book requirements; excavation controls and shoring; pipe handling and installation including electrofusion and butt fusion; testing and isolation with LP and MP equipment, permits, and certification; connections with firefighting equipment, purging and leak detection; meter installation and labeling; backfilling and compaction to HAUC; calibration and maintenance of tools and lifting equipment; corrective actions, photos, and signatures for accountability.
by Morland Utilities, from the Community
Downloads: 0
Get
Template
Service Laying Quality Audit
This Service Laying quality audit checklist supports field teams installing gas services. It covers general requirements (procedures, permits, SSRA), service laying standards (marker tape, valves, sleeves, bonding, ECV, meter boxes), excavation and open cut controls, live/dead insertion and Serviflex methods, soil displacement moling, meter disconnection, pressure testing, and purging/commissioning. It also details PE pipe handling, electrofusion and butt fusion jointing practices, under pressure working/flowstopping, safe person and BA requirements, plant location and CDM documentation, and environmental controls including spill management and waste. Use it to verify compliance, record results, and improve installation quality and safety.
by Ben Cronin, from the Community
Downloads: 0
Get
Template
Installation of PE Pressure Sewer Pipe by HDD
This field checklist guides the installation of PE pressure sewer pipe using horizontal directional drilling. It covers onsite documentation and permits, daily plant checks, material specs (PN16, SDR11, PE100), service locating and minimum clearances to WSA standards, traffic management and environmental controls, drill rig setup within the construction impact zone, pipe laying requirements including minimum cover and tracer wire, drilling fluid management with HydroVac, reaming and pullback practices, and verification, testing, and sign-off. Designed to support safe, compliant water and wastewater sewer works.
by john smith, from the Community
Downloads: 0
Get
Template
MGN Mainlaying - Open Cut
This MGN Mainlaying - Open Cut checklist guides gas network crews and contractors through safe, compliant main installation. It covers pre-start planning, notifications, and verification of SWMS and JSA; locating, proving, and protecting underground assets with DBYD plans; trench preparation with required depths, clearances, and bedding; pipe preparation and joining methods including butt fusion and electrofusion; laying and securing pipe with correct identification and bonding; backfilling and reinstatement using approved materials and marker tape; pigging and daily pressure testing with calibrated equipment; connections including poly-to-poly procedures and Williamson tee welding; commissioning and purging in line with the commissioning plan; and final documentation of sizes, lengths, pressures, fittings, and as-laid drawings. Designed to help meet Multinet Gas requirements and keep crews and the public safe.
by Karen Kennan, from the Community
Downloads: 10+
Get

Service Line Installation Audit Checklist 2018

About author

You might also like

QC60 Gas Technical Audit and Inspection Checklist

Service Laying Quality Audit

Installation of PE Pressure Sewer Pipe by HDD

MGN Mainlaying - Open Cut

You might also like

QC60 Gas Technical Audit and Inspection Checklist

Service Laying Quality Audit

Installation of PE Pressure Sewer Pipe by HDD

MGN Mainlaying - Open Cut