Template

QC60 Gas Technical Audit and Inspection Checklist

by Morland Utilities, from the Community

The QC60 Gas Technical Audit and Inspection checklist supports audits of gas utility works across the full lifecycle of street works and mains services. Sections cover documentation, qualifications, and permits; site housekeeping and PPE; signing, lighting, and guarding to Red Book requirements; excavation controls and shoring; pipe handling and installation including electrofusion and butt fusion; testing and isolation with LP and MP equipment, permits, and certification; connections with firefighting equipment, purging and leak detection; meter installation and labeling; backfilling and compaction to HAUC; calibration and maintenance of tools and lifting equipment; corrective actions, photos, and signatures for accountability.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Method Statement and Risk Assessment
This construction method statement and risk assessment template supports safe excavation and reinstatement activities. It covers planning site access, street works signing and guarding, permits to break ground, utility detection with CAT and Genny, safe digging near services per HSG 47, shoring and trench support, inspections, sump and dewatering, spoil management, and disposal. It also includes guidance for electrofusion welding of PE pipe, joint preparation, alignment, and quality checks, plus backfilling, compaction to HAUC standards, and controls for adverse weather. Use it to brief teams, record risks, and verify completion.
by john murphy, from the Community
Downloads: 0
Get
Template
Onsite Audit Checklist
Use this onsite audit checklist to verify safe and compliant gas utility field operations. Cover personnel safety and PPE, tools and lifting gear, environmental controls and spill response, locating underground and overhead utilities, excavation access and spoil storage, meter installation and labeling, HDPE jointing and butt fusion checks, transport compliance and vehicle inspections, and team IDs and qualifications. Includes sign off for team leader and auditor.
by stephen Pearce, from the Community
Downloads: 10+
Get
Template
HVAC Site Health, Safety and Environmental Audit
This comprehensive checklist supports site health, safety and environmental audits for refrigeration and HVAC service and maintenance works. It covers operative sign in and inductions, PPE requirements, working at height controls including ladders, towers and MEWPs, plant operator licensing, environmental controls for noise, dust and access, electrical isolation and lockout, hot works readiness with extinguishers and permits, F Gas and ammonia break in procedures with detection and emergency equipment, lifting operations and accessories, required permits, COSHH management, storage and housekeeping standards, welfare facilities, incident and hazard reporting, asbestos awareness and vehicle readiness.
by Mathew noon, from the Community
Downloads: 10+
Get
Template
Liberty Gas Engineer Audit Checklist
This gas engineer audit checklist helps supervisors assess field operatives across safety, quality, and compliance. It covers operative appearance and ID, PPE availability and condition, hand and power tools including PAT and calibration, work at height equipment and ladder registers, site housekeeping and public protection, COSHH controls and documentation, and vehicle inspections from lights and tyres to first aid kits and extinguishers. It also verifies gas safety tasks such as tightness tests, meter and boiler inlet pressures, and electrical safety checks. The template includes sections for documentation, customer satisfaction, and signatures to capture accountability and follow-up actions.
by Mat Smith, from the Community
Downloads: 30+
Get

QC60 Gas Technical Audit and Inspection Checklist

About author

You might also like

Method Statement and Risk Assessment

Onsite Audit Checklist

HVAC Site Health, Safety and Environmental Audit

Liberty Gas Engineer Audit Checklist

You might also like

Method Statement and Risk Assessment

Onsite Audit Checklist

HVAC Site Health, Safety and Environmental Audit

Liberty Gas Engineer Audit Checklist