Template

SMEC Sewer Inspection and Audit Form

by James Sorraghan, from the Community

20+

Use this SMEC sewer inspection and audit form to document sewer construction and rehabilitation works. Record project details, confirm OHS compliance and PPE, assess trench excavation dimensions and safety, verify pipe laying alignment and materials, check embedment and compaction, validate backfill type and evidence, and inspect manholes and structures. Add photos and notes, track sections checked, and capture onsite verification for quality, safety, and compliance.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Sewer Construction Audit Checklist
Use this Sewer Construction Audit checklist to assess compliance and workmanship across civil sewer installations. Verify OH&S controls and site documentation, confirm excavation limits and trench support, inspect pipe materials, bedding, jointing, embedment, and foundation conditions. Check alignment and levels, access chambers and inspection shafts, lids and covers, step irons or ladders, and property branch markers. Record delivery dockets, monitor surface restoration, and ensure correct procedures for connections to live assets. Complete testing and record outcomes for manhole and property connections and maintain asset records.
by James Sorraghan, from the Community
Downloads: 20+
Get
Template
SMEC Site Inspection Report Template
Use this SMEC Site Inspection Report to document housekeeping and site protection, PPE compliance, excavation safeguards, and environmental controls. Capture evidence of traffic management against the approved TMP, record hold points witnessed, and note design issues, work instructions, and variations raised by the contractor. Track works in progress and site conditions, with space to attach photos and comments, ensuring a consistent, auditable record for civil construction projects.
by James Sorraghan, from the Community
Downloads: 10+
Get
Template
B.W. Sewer Main Construction Checklist
This sewer main construction checklist supports field inspections across civil works. Verify site safety and management, traffic control, permits, and PPE. Assess confined space requirements and gas detection. Check machinery safety features and service locating. For excavations and trenches over 1.5 m, confirm protections, edge guardrails, ladder access, spoil placement, and dewatering. Inspect pipe laying for alignment to plans, correct pipe class, approved bedding, clean joints, and full insertion to witness marks. Review property branches and excavation extents. Validate backfilling against specifications with NATA-compaction testing. Examine maintenance structures and manholes: location, base layout, connectors, formwork, step irons/ladders, vibration, drops, frames, surrounds, clearances, and concrete infill. Confirm trench and surface restoration, property acceptance, protection from heavy machinery, and full reinstatement. Capture comments, photos, and superintendent sign-off.
by Robert Newnham, from the Community
Downloads: 20+
Get
Template
Sewer Connection Point Audit Form
This audit form helps verify sewer connection points on sewer mains are installed to approved plans and industry standards. Inspect regulation height and depth, confirm marker tape and surface completion, check anchor supports and thrust blocks for bends, and review branch sewer installation from main to property boundary against approved offsets. Assess bedding material suitability and, for longer branch runs, request a CCTV survey to confirm grade and drainage with no flat spots. Capture photos, add comments, mark compliance status, and sign off the audit for follow up as needed.
by Kris Hunter, from the Community
Downloads: 10+
Get

Sewer Construction Audit Checklist

Use this Sewer Construction Audit checklist to assess compliance and workmanship across civil sewer installations. Verify OH&S controls and site documentation, confirm excavation limits and trench support, inspect pipe materials, bedding, jointing, embedment, and foundation conditions. Check alignment and levels, access chambers and inspection shafts, lids and covers, step irons or ladders, and property branch markers. Record delivery dockets, monitor surface restoration, and ensure correct procedures for connections to live assets. Complete testing and record outcomes for manhole and property connections and maintain asset records.

by James Sorraghan, from the Community

20+

Get

Template

SMEC Site Inspection Report Template

Use this SMEC Site Inspection Report to document housekeeping and site protection, PPE compliance, excavation safeguards, and environmental controls. Capture evidence of traffic management against the approved TMP, record hold points witnessed, and note design issues, work instructions, and variations raised by the contractor. Track works in progress and site conditions, with space to attach photos and comments, ensuring a consistent, auditable record for civil construction projects.

by James Sorraghan, from the Community

10+

Get

Template

B.W. Sewer Main Construction Checklist

This sewer main construction checklist supports field inspections across civil works. Verify site safety and management, traffic control, permits, and PPE. Assess confined space requirements and gas detection. Check machinery safety features and service locating. For excavations and trenches over 1.5 m, confirm protections, edge guardrails, ladder access, spoil placement, and dewatering. Inspect pipe laying for alignment to plans, correct pipe class, approved bedding, clean joints, and full insertion to witness marks. Review property branches and excavation extents. Validate backfilling against specifications with NATA-compaction testing. Examine maintenance structures and manholes: location, base layout, connectors, formwork, step irons/ladders, vibration, drops, frames, surrounds, clearances, and concrete infill. Confirm trench and surface restoration, property acceptance, protection from heavy machinery, and full reinstatement. Capture comments, photos, and superintendent sign-off.

by Robert Newnham, from the Community

20+

Get

Template

Sewer Connection Point Audit Form

This audit form helps verify sewer connection points on sewer mains are installed to approved plans and industry standards. Inspect regulation height and depth, confirm marker tape and surface completion, check anchor supports and thrust blocks for bends, and review branch sewer installation from main to property boundary against approved offsets. Assess bedding material suitability and, for longer branch runs, request a CCTV survey to confirm grade and drainage with no flat spots. Capture photos, add comments, mark compliance status, and sign off the audit for follow up as needed.

by Kris Hunter, from the Community

10+

Get

SMEC Sewer Inspection and Audit Form

About author

You might also like

Sewer Construction Audit Checklist

SMEC Site Inspection Report Template

B.W. Sewer Main Construction Checklist

Sewer Connection Point Audit Form

You might also like

Sewer Construction Audit Checklist

SMEC Site Inspection Report Template

B.W. Sewer Main Construction Checklist

Sewer Connection Point Audit Form