Template

NQBP Booster Pump Station Thrust Block ITP (C912)

by Adam Wright, from the Community

This inspection test plan (ITP) covers the construction of an internal inline thrust block for a booster pump station. It guides correct setout to latest IFC drawings, clean formwork installation, and reinforcement placement including N16 threaded rods into Ancon Qwikfoot anchors and N12 horizontal and vertical bars at 150 mm centres with N12 U-bars. It records concrete requirements (N40 strength or above), slump, quantity, pump needs, and water added. It includes a hold point for pre-pour inspection by STP Consultants, pour execution and vibration, stripping and cleaning of formwork, completion of pour records, docket photos, and final sign-offs by Fergus Builders and STP Consultants.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Booster Pump Station Pump Plinth ITP
Use this inspection and test plan to manage construction of an internal pump plinth for a booster pump station. Steps cover setout to IFC drawings, clean formwork, N12 reinforcement at 150 mm centres tied to starters, ordering N40 concrete, slump and quantity checks, pumping and added water records. Includes a pre-pour hold point inspection by STP Consultants, pour and vibration, strip and clean, completion of the concrete pour record sheet, and photo capture of concrete dockets. Final ITP sign off by Fergus Builders and STP Consultants.
by Adam Wright, from the Community
Downloads: 0
Get
Template
NQBP Booster Pump Station Footings ITP C912
This Inspection Test Plan template guides the construction of pump station building footings. It covers setout and excavation to specified depths and widths, blinding placement, formwork cleanliness, reinforcement schedules for footings and stairs, starter bars, concrete strength and slump, pumping, water additions, and pre-pour hold point inspections. It includes vibration, stripping, cleaning, photo records, and final sign-offs by builders and consultants.
by Adam Wright, from the Community
Downloads: 0
Get
Template
NQBP Blockwork Walls ITP for Booster Pump Station
A practical Inspection Test Plan template for building blockwork walls on the NQBP Booster Pump Station project. It covers site details, setout checks, reinforcement requirements for starter bars, vertical and horizontal bars, concrete core fill strength and slump, a pre pour inspection hold point by consultants, photo records of concrete dockets, and builder and consultant sign off. Use this as a starting point only and seek professional advice for your site and jurisdiction.
by Adam Wright, from the Community
Downloads: 0
Get
Template
NQBP Booster Pump Station Blockwork Base ITP
Download a ready-to-use Inspection Test Plan for constructing the blockwork base of the NQBP Booster Pump Station. The checklist guides teams through site setup, concrete requirements (20 MPa core fill, 10 mm aggregate, 225 mm slump), reinforcement verification for starters, vertical and horizontal bars, and perimeter and internal pier blocks. It includes a hold point for pre-pour inspection by consultants, photo capture of dockets, pour records, and final sign-offs by the builder and consultant. Use it to standardize quality control, document approvals, and ensure compliance with IFC drawings.
by Adam Wright, from the Community
Downloads: 0
Get

NQBP Booster Pump Station Thrust Block ITP (C912)

About author

You might also like

Booster Pump Station Pump Plinth ITP

NQBP Booster Pump Station Footings ITP C912

NQBP Blockwork Walls ITP for Booster Pump Station

NQBP Booster Pump Station Blockwork Base ITP

You might also like

Booster Pump Station Pump Plinth ITP

NQBP Booster Pump Station Footings ITP C912

NQBP Blockwork Walls ITP for Booster Pump Station

NQBP Booster Pump Station Blockwork Base ITP