Template

Panelised Wall and Floor Cassettes Install Checklist

by Jacob Goldsmith, from the Community

This construction checklist guides the installation and QA of panelised timber wall and floor cassettes. It covers pre-start requirements, SWMS, site-specific hazards, site access, and amenities. Verify tools and equipment, PPE, and MSDS. Inspect slab dimensions, placement of preinstalled beams, and Partiwall. Check intermediate floor cassettes for correct fixings and connections, square and level alignment, and install safety rails and void platforms. Confirm walls, floors, and roof elements are square, level, and plumb, braces are secure, uninstalled elements are made safe, photos are taken for records, and the site is cleaned.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Stage 1 Inspection Checklist
This Stage 1 inspection checklist helps construction teams verify critical pre-roof elements before progressing to superstructure. Items include chassis and deck setup, coach bolts secure to chassis, boarding per specification, first-fix plumbing, pressure tests pre-decking and deck down, radiator pipework location and size, hot and cold lines defined, open ends sealed, and flow and return identified. It also covers timber condition and fixing points, center lugs alignment, and key dimensional checks: openings are square and to drawing, internal and external walls are square, level, and plumb, ceiling line is level, and locations match supplied drawings. Post-roof readiness items such as Velux and window liners, fireplace fitted and boarded, cuts and halvings, wall plate condition, and general workmanship are included to ensure quality and compliance at the first build stage.
by Scott Calvert, from the Community
Downloads: 10+
Get
Template
Parts and Services Safety Checklist
This parts and services safety checklist helps retail and service departments verify safe, orderly work areas. Inspect aisles and floors for slip, trip, and fall hazards; confirm floor mats are flat and intact; check products are merchandised and stacked securely; and ensure first aid kits are stocked and accessible. Verify fire extinguishers and alarm stations are unobstructed and in good condition, walking surfaces are repaired or made safe, and all exits are clear. Assess tool and equipment condition, availability of appropriate PPE, and that staging areas are clear and propane cages are secure.
by Michael Bielewicz, from the Community
Downloads: 0
Get
Template
WUC Timber Wall Frame Checklist
Use this checklist to assess timber wall frames during residential construction. Verify ground and first floor wall heights per scope, internal door heights, and window head and sill heights to match kitchen layouts and privacy requirements. Check room dimensions and stairwell size. Inspect framing for delivery damage; confirm columns, posts, and walls are plumb, square, and straight within tolerance. Ensure double or triple studs under girders, beams, and lintels. Confirm top plates are straight, bracing installed per engineering, tie-downs to slab, slab overhang within 10 mm, and bottom plates at door openings cut out. Capture comments, media, and supervisor sign-off.
by Ganesan Gopal, from the Community
Downloads: 0
Get
Template
Hebel Pre-Start Inspection Checklist
Ensure your site is ready to install Hebel panels and flooring with this comprehensive pre-start inspection checklist. Verify access, power and water, scaffolding and loading bays, frame alignment, termite barriers and rebates, control joints, safety rails and void protection, correct installation of windows, doors, flashings and wall wrap, and readiness of services and wet areas. Confirm equipment, waste management and documentation before work begins to reduce rework, improve safety and keep construction on schedule.
by Stephen Chapman, from the Community
Downloads: 10+
Get

Panelised Wall and Floor Cassettes Install Checklist

About author

You might also like

Stage 1 Inspection Checklist

Parts and Services Safety Checklist

WUC Timber Wall Frame Checklist

Hebel Pre-Start Inspection Checklist

You might also like

Stage 1 Inspection Checklist

Parts and Services Safety Checklist

WUC Timber Wall Frame Checklist

Hebel Pre-Start Inspection Checklist