Template

WUC Timber Wall Frame Checklist

by Ganesan Gopal, from the Community

Use this checklist to assess timber wall frames during residential construction. Verify ground and first floor wall heights per scope, internal door heights, and window head and sill heights to match kitchen layouts and privacy requirements. Check room dimensions and stairwell size. Inspect framing for delivery damage; confirm columns, posts, and walls are plumb, square, and straight within tolerance. Ensure double or triple studs under girders, beams, and lintels. Confirm top plates are straight, bracing installed per engineering, tie-downs to slab, slab overhang within 10 mm, and bottom plates at door openings cut out. Capture comments, media, and supervisor sign-off.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Burbank Homes Frame Checklist
Use this comprehensive frame stage checklist to assess residential builds by Burbank Homes or similar projects. Verify room dimensions, walls straight and plumb, squareness, bulkheads, wall plates, studs under truss loads, engineered bracing, window and door frames level with packers, flashings to timber windows, trusses plumb and aligned, connections flush, creepers and trimmers including manhole trimmers, columns square, door openings correct, joists and blocking per manufacturer, sheet flooring screw spacing, stair openings, protective shields for two-storey builds, site cleanliness, temporary handrails to voids, provisions for A/C, shower niches, frame overhangs, cavity sliders plumb, tie-downs complete, ceiling heights as per plan, temporary supports, outriggers strapped, eaves and valley boards supported, bi-fold and external doors supported, and supports for box gutters. Includes contractor scoring for quality, time and WHS with reinspection sign-off.
by Chris Moore, from the Community
Downloads: 10+
Get
Template
WUC Concrete Slab Inspection Checklist
Use this WUC concrete slab checklist to inspect slab works on site. Verify finish floor levels against drawings, confirm insulation and slab edges, and check brick rebates and wall overhang tolerances. Assess level deviation within 2 m, ensure reinforcement is not visible, and note any honeycombing or cracks. Confirm rebates and shower set-downs, recesses for base plates, and positions of electrical and plumbing conduits. Record defects for contractor rectification, attach photos and comments, and complete supervisor sign-off with date and time.
by Ganesan Gopal, from the Community
Downloads: 10+
Get
Template
WUC Window Install Checklist
This WUC window install checklist helps site supervisors and carpenters verify key measures and compliance during window installation. Check head heights against scope and drawings, confirm splashback sill height at 860 mm and privacy sill at 1680 mm for timber frames, maintain a 10 mm gap above frames, and ensure obscure and toughened glass are in the correct locations. Verify trim and flashing, document each elevation with photos, and add comments for review. Includes guidance for custom skylights, site measure after roof framing, and providing Colorbond sheet profiles. Complete sign-off with date and supervisor signature.
by Ganesan Gopal, from the Community
Downloads: 0
Get
Template
Framing QA Audit Checklist
Use this Framing QA Audit checklist to verify timber floor structures, wall framing, window installation, and roof framing meet design and code requirements. Inspect joists, beams, bracing, tie downs, stud to plate connections, and openings for size, plumb, level, and layout. Confirm truss design and installation tolerances, supports, secondary plates, and permanent bracing are in place. Review window flashings and reveals, eave overhangs, battens, box gutter boarding, and man hole framing. Record defects, assign corrective actions, and capture sign off to ensure framing quality and compliance.
by Tony Anderson, from the Community
Downloads: 10+
Get

WUC Timber Wall Frame Checklist

About author

You might also like

Burbank Homes Frame Checklist

WUC Concrete Slab Inspection Checklist

WUC Window Install Checklist

Framing QA Audit Checklist

You might also like

Burbank Homes Frame Checklist

WUC Concrete Slab Inspection Checklist

WUC Window Install Checklist

Framing QA Audit Checklist