Template

Street Lighting and Guarding Audit Checklist

by Keith Wigley, from the Community

30+

This street lighting and guarding audit checklist helps verify compliant street works setup and site safety. Assess advance warning signs and sequence, coning and fencing of safety zones, barrier stability, pedestrian walkways and widths, warning lights, ramps and boards, and road plates. Confirm information boards and pedestrian arrows are correctly installed, equipment is fit for purpose, and the chosen traffic control method is appropriate. Record permits or NRASWA details, location, operatives, and QA or CTK numbers. Capture defects, comments, photos, and signatures, and log agreements for footway closures and contingency for vandalism or adverse weather.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Street Lighting and Guarding
Street Lighting and Guarding audit
by Craig Winter, from the Community
Downloads: 30+
Get
Template
SLG Site Audit for Street Works Compliance
This SLG site audit template helps teams assess signing, lighting and guarding on active street works. Verify permit board details, PPE, site setup, advance signage, tapers per the Red Book, safety zones, vehicle parking, footway closures and pedestrian crossing provision. Check barriers, cone condition, sandbagging, arrows and carriageway incursions. Record traffic light setups, road closures, diversion routes and resident access arrangements. Capture photos for evidence and confirm signatures from team leaders and supervisors, with space for recommendations.
by Mathew Nice, from the Community
Downloads: 0
Get
Template
SLG Audit Checklist for Street Works
This SLG (Signing, Lighting, and Guarding) audit checklist helps field teams assess street works set-ups for telecom and utility projects. Verify advance warning signs, road narrows and footpath closures, barrier type and continuity, CityFibre courtesy boards, sandbagging, cone placement, blue arrows, secured steel plates, and walk boards. Capture what’s required to meet UK Chapter 8 guidance for pedestrians and vehicles and record corrective actions to bring the site into compliance.
by Darren Van der boon, from the Community
Downloads: 0
Get
Template
Street Works Assessment Checklist
Use this Street Works Assessment checklist to plan and verify safe street and roadworks. Review compliance, qualified operatives, SLG and Chapter 8 requirements, lane widths, pedestrian and road-user risks, unattended site controls, and detailed traffic management arrangements including give and take, priority boards, diversions, stop/go, and portable signals. Capture photos and design details, assign responsibilities, and record inspection frequencies and signatures to demonstrate compliance and reduce risk.
by Shaun Jones, from the Community
Downloads: 0
Get

Street Lighting and Guarding Audit Checklist

About author

You might also like

Street Lighting and Guarding

SLG Site Audit for Street Works Compliance

SLG Audit Checklist for Street Works

Street Works Assessment Checklist

You might also like

Street Lighting and Guarding

SLG Site Audit for Street Works Compliance

SLG Audit Checklist for Street Works

Street Works Assessment Checklist