Template

C1218 HardiePlank VL Quality Assurance Checklist

by William Carter, from the Community

This HardiePlank VL quality assurance checklist helps site teams verify key steps in cladding installation. It covers Y-Wall board installation with correct fixings, sealed joints with fire mastic, DAFA tape, and primer; Tyvek Firecurb membrane with correct laps and tapes; EPDM window sealing; setting out top hats, helping hand brackets, and rails per construction drawings and fixing schedules; installing Rockwool insulation to the specified pattern and fixings; and Siderise fire barriers installed by trained operatives. Includes guidance to attach photos, notes, and corrective actions, obtain digital signatures, and keep areas clean and tidy.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
C1218 HardiePlank VL Cladding QA Checklist
This checklist supports facade remediation and HardiePlank VL cladding installation. It covers removing existing cladding to expose SFS or concrete; installing Rockwool Flex/Duo Slab insulation; fitting Y-Wall boards with sealed joints using fire mastic, DAFA tape and primer; EPDM window sealing; setting out top hats, helping hand brackets, rails and channels per drawings; installing Siderise fire barriers by trained operatives; and completing HardiePlank VL cladding per manufacturer guidance. Guidance is included for adding photos, notes, corrective actions, and capturing digital signatures to finalize and share the report.
by Jonathon Young, from the Community
Downloads: 0
Get
Template
Balcony CP Board QA Checklist
This quality assurance checklist guides inspections for balcony CP board and cladding installation. It covers steel plenum installation, fire mastic and water sealing, and waterproof integrity. Verify top hats are correctly specified, aligned, fixed to SFS studs, and level. Check helping hand brackets, fixings, and slot positions meet design. Inspect vertical and horizontal fire barriers per FSI specification, retaining brackets, compression, and foil tape application. Review visqueen selection, fixing, and condition. Confirm insulation specification, tight fit, fixings, and condition. Validate horizontal and vertical rails alignment and datum. Finally, confirm Y wall board type, fixing counts, and panel condition, with photos, dates, and sign offs.
by Julio Barzallo, from the Community
Downloads: 0
Get
Template
PERMAROCK Render Installation Checklist
This PERMAROCK render installation checklist supports site QA for cladding and external wall systems. It guides teams through removing existing cladding, fitting Rockwool Flex Slab with no gaps, and installing Y-Wall boards per manufacturer instructions. It covers joint sealing with fire mastic, DAFA tape, and primer, EPDM window sealing, and proper setting out and staggering of insulation boards. It details basecoat application with 45-degree stress patches at window corners, embedding mesh, leveling, priming, and applying the topcoat. The template enables photo capture, notes, corrective actions with assignees, priorities and due dates, plus digital signatures for installer, contractor, and client. Use it to keep areas clean and tidy and to produce shareable reports in PDF, Word, Excel, or web link formats.
by Jonathon Young, from the Community
Downloads: 0
Get
Template
External Cladding and Fire Barriers QA Checklist
Use this quality assurance inspection template for external cladding systems and fire barriers on building facades. The checklist covers Tyvek house wrap, top hats, helping hand brackets, vertical and horizontal fire stops, insulation, horizontal and vertical rails, and terracotta tiles. Verify correct components, fixings, alignment, compression, clearances, gaps, and movement joints. Record date and time of inspection, inspector name, locations, and photo evidence for each elevation. Follow design specifications and maintain open cavities, correct centers, and level rails to ensure safety, compliance, and a high quality finish.
by William Gibbs, from the Community
Downloads: 0
Get

C1218 HardiePlank VL Quality Assurance Checklist

About author

You might also like

C1218 HardiePlank VL Cladding QA Checklist

Balcony CP Board QA Checklist

PERMAROCK Render Installation Checklist

External Cladding and Fire Barriers QA Checklist

You might also like

C1218 HardiePlank VL Cladding QA Checklist

Balcony CP Board QA Checklist

PERMAROCK Render Installation Checklist

External Cladding and Fire Barriers QA Checklist