Template

Balcony CP Board QA Checklist

by Julio Barzallo, from the Community

This quality assurance checklist guides inspections for balcony CP board and cladding installation. It covers steel plenum installation, fire mastic and water sealing, and waterproof integrity. Verify top hats are correctly specified, aligned, fixed to SFS studs, and level. Check helping hand brackets, fixings, and slot positions meet design. Inspect vertical and horizontal fire barriers per FSI specification, retaining brackets, compression, and foil tape application. Review visqueen selection, fixing, and condition. Confirm insulation specification, tight fit, fixings, and condition. Validate horizontal and vertical rails alignment and datum. Finally, confirm Y wall board type, fixing counts, and panel condition, with photos, dates, and sign offs.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
External Cladding and Fire Barriers QA Checklist
Use this quality assurance inspection template for external cladding systems and fire barriers on building facades. The checklist covers Tyvek house wrap, top hats, helping hand brackets, vertical and horizontal fire stops, insulation, horizontal and vertical rails, and terracotta tiles. Verify correct components, fixings, alignment, compression, clearances, gaps, and movement joints. Record date and time of inspection, inspector name, locations, and photo evidence for each elevation. Follow design specifications and maintain open cavities, correct centers, and level rails to ensure safety, compliance, and a high quality finish.
by William Gibbs, from the Community
Downloads: 0
Get
Template
WILTERN Terracotta QA Checklist
Use this WILTERN Terracotta QA checklist to verify every stage of a terracotta facade installation. Inspect top hats, helping hand brackets, and fixings for correct type, spacing, centers, height, and level. Confirm fire stops meet design and FSI specifications, with proper compression, tape, retaining brackets, and open cavity dimensions. Check insulation type, fit, contact, and condition. Review horizontal and vertical rails for alignment, datum, fixings, and the use of slots and dead fix positions. Validate tile type, seating on clips, pattern, 10 mm gaps, movement joints, cover plates, and overall finish. Capture photos, dates, and inspector details for complete documentation.
by Julio Barzallo, from the Community
Downloads: 0
Get
Template
Wiltern Brick Slip QA Checklist
This brick slip quality assurance checklist supports external cladding and fire barrier inspections from start to finish. It guides teams through Tyvek house wrap verification, top hats, helping hand brackets, and designated hold points for vertical and horizontal fire stops. Inspectors confirm insulation specification and fit, rail types and fixing patterns, and the installation and alignment of brick slip channels and slips. The form captures dates, locations, photos of elevations, inspector details, required clearances, fixings, and compression, ensuring compliance with design and safety requirements.
by William Gibbs, from the Community
Downloads: 0
Get
Template
Brick Slip Cladding Inspection Checklist
This quality assurance checklist supports inspection of brick slip cladding systems from pre-start to handover. It covers installer credentials and RAMS, verification of design drawings and data sheets, breather membrane installation, rails and bracket fixing to specification, vertical and horizontal cavity fire barriers, insulation placement and fixings, L and T vertical rails, horizontal starter, mid and top rails, window flashings and cills with PPC components, fixings specification, brick installation and spacer alignment, movement joints, pointing mortar, and final handover inspection.
by Pavel Serban, from the Community
Downloads: 0
Get

Balcony CP Board QA Checklist

About author

You might also like

External Cladding and Fire Barriers QA Checklist

WILTERN Terracotta QA Checklist

Wiltern Brick Slip QA Checklist

Brick Slip Cladding Inspection Checklist

You might also like

External Cladding and Fire Barriers QA Checklist

WILTERN Terracotta QA Checklist

Wiltern Brick Slip QA Checklist

Brick Slip Cladding Inspection Checklist