Template

Bricklayer Inspection Checklist

by Trevor Williamson, from the Community

This bricklayer inspection checklist helps supervisors and trades verify brick selection, joint profile and color, joint sizing, sills, blending, cavity width and cleanliness, caulking, articulation joints, and overall site safety. Use it to document issues with notes and photos, confirm completion with signatures and dates, and maintain consistent quality and compliance on masonry works.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Bricklayer Specification Sheet
This Bricklayer Specification Sheet template helps teams standardize masonry works and document compliance with Australian building standards. Record job details such as document number, job address, and bricklayer name, then verify key requirements including mortar mix ratios to AS 3700, installation of flashings and weep holes at specified centers, articulation joints to engineering plans, and correct sill clearances. Capture quality tolerances for bed and perpend joints, wall plumb and straightness, and ensure consistent blending of bricks across packs. Include steps for dry brushing to remove excess mortar, fixing wall tiles at required centers, and on site housekeeping such as stacking pallets and cleaning edges. Use this checklist to improve workmanship quality, safety, and compliance across bricklaying tasks.
by Nicholas Stodden, from the Community
Downloads: 30+
Get
Template
Bricklayer QA Inspection Checklist
This bricklayer QA inspection checklist supports quality assurance for residential brickwork. It covers site preparation and safety, material selections, damp-proofing (viscourse) placement, wall ties and control joints, cavity cleaning, weep holes, sills, and finishing standards. Use it to verify plumb and level walls, proper spacing, stainless ties in coastal zones, bushfire provisions, and thorough clean-up. Ideal for supervisors and contractors to ensure consistent workmanship and compliance.
by Murat Gokce, from the Community
Downloads: 10+
Get
Template
Brick and Blockwork Quality Assurance Checklist
Use this Brick and Blockwork Quality Assurance checklist to standardize masonry inspections on site. Capture photos of sample panels, verify setting out, alignment, and joint tolerances, and check brick slips, wall plates, padstones, and fire barriers. Confirm structural openings, cavity closers, lintels including prefabricated, air bricks and ventilation, DPC and cavity trays, weep holes, wall ties, cavity cleaning and insulation, and movement joints. Record mortar mix and color, protect facework, complete housekeeping, and sign off with approvals.
by Dan Bradstock, from the Community
Downloads: 10+
Get
Template
ITP Brick Cavity Flashing Checklist
Use this inspection test plan to control quality of brick cavity flashing installations. Verify brickwork against elevation plans, joint thickness, straightness, sills and falls, lintel bearings, continuous head and sill flashings, cavity widths and cleaning, and tie spacing. Record onsite or offsite submissions, document materials and areas completed, add photos, and capture subcontractor and representative sign-offs for final inspection.
by moufid sukkar, from the Community
Downloads: 0
Get

Bricklayer Specification Sheet

This Bricklayer Specification Sheet template helps teams standardize masonry works and document compliance with Australian building standards. Record job details such as document number, job address, and bricklayer name, then verify key requirements including mortar mix ratios to AS 3700, installation of flashings and weep holes at specified centers, articulation joints to engineering plans, and correct sill clearances. Capture quality tolerances for bed and perpend joints, wall plumb and straightness, and ensure consistent blending of bricks across packs. Include steps for dry brushing to remove excess mortar, fixing wall tiles at required centers, and on site housekeeping such as stacking pallets and cleaning edges. Use this checklist to improve workmanship quality, safety, and compliance across bricklaying tasks.

by Nicholas Stodden, from the Community

30+

Get

Template

Bricklayer QA Inspection Checklist

This bricklayer QA inspection checklist supports quality assurance for residential brickwork. It covers site preparation and safety, material selections, damp-proofing (viscourse) placement, wall ties and control joints, cavity cleaning, weep holes, sills, and finishing standards. Use it to verify plumb and level walls, proper spacing, stainless ties in coastal zones, bushfire provisions, and thorough clean-up. Ideal for supervisors and contractors to ensure consistent workmanship and compliance.

by Murat Gokce, from the Community

10+

Get

Template

Brick and Blockwork Quality Assurance Checklist

Use this Brick and Blockwork Quality Assurance checklist to standardize masonry inspections on site. Capture photos of sample panels, verify setting out, alignment, and joint tolerances, and check brick slips, wall plates, padstones, and fire barriers. Confirm structural openings, cavity closers, lintels including prefabricated, air bricks and ventilation, DPC and cavity trays, weep holes, wall ties, cavity cleaning and insulation, and movement joints. Record mortar mix and color, protect facework, complete housekeeping, and sign off with approvals.

by Dan Bradstock, from the Community

10+

Get

Template

ITP Brick Cavity Flashing Checklist

Use this inspection test plan to control quality of brick cavity flashing installations. Verify brickwork against elevation plans, joint thickness, straightness, sills and falls, lintel bearings, continuous head and sill flashings, cavity widths and cleaning, and tie spacing. Record onsite or offsite submissions, document materials and areas completed, add photos, and capture subcontractor and representative sign-offs for final inspection.

by moufid sukkar, from the Community

Get

Bricklayer Inspection Checklist

About author

You might also like

Bricklayer Specification Sheet

Bricklayer QA Inspection Checklist

Brick and Blockwork Quality Assurance Checklist

ITP Brick Cavity Flashing Checklist

You might also like

Bricklayer Specification Sheet

Bricklayer QA Inspection Checklist

Brick and Blockwork Quality Assurance Checklist

ITP Brick Cavity Flashing Checklist