Template

ITP Brick Cavity Flashing Checklist

by moufid sukkar, from the Community

Use this inspection test plan to control quality of brick cavity flashing installations. Verify brickwork against elevation plans, joint thickness, straightness, sills and falls, lintel bearings, continuous head and sill flashings, cavity widths and cleaning, and tie spacing. Record onsite or offsite submissions, document materials and areas completed, add photos, and capture subcontractor and representative sign-offs for final inspection.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Brickwork Quality Inspection Checklist (Level 1)
Use this Level 1 brickwork quality inspection to confirm setting out to current architectural drawings, check window and door openings for width, height and plumb, and verify coursing, perp joints and permitted tolerances. Inspect movement joints, cavity ties and brick reinforcement, and confirm lintel installation and bearing as specified. Verify Keyfix cavity trays and movement ties, weep vents, and insulation (Rainscreen Duo Slab) fit, spacing and continuity. Check brick tie channels, compression sleeves, and masonry support locations, bolt torque and pull-out testing. Confirm fire and cavity barriers (Siderise) are approved, correctly fixed, sealed and tightly abutted, with non-combustible DPC where required. Optional stonework checks included. Finish with cavity cleanliness, site tidiness, notes and sign-offs for Callan Construction and the principal contractor.
by Aaron Martin, from the Community
Downloads: 0
Get
Template
Brick and Blockwork Quality Assurance Checklist
Use this Brick and Blockwork Quality Assurance checklist to standardize masonry inspections on site. Capture photos of sample panels, verify setting out, alignment, and joint tolerances, and check brick slips, wall plates, padstones, and fire barriers. Confirm structural openings, cavity closers, lintels including prefabricated, air bricks and ventilation, DPC and cavity trays, weep holes, wall ties, cavity cleaning and insulation, and movement joints. Record mortar mix and color, protect facework, complete housekeeping, and sign off with approvals.
by Dan Bradstock, from the Community
Downloads: 10+
Get
Template
Cavity Flashings Checklist
Use this cavity flashings checklist to verify compliant installation and workmanship around brickwork and framed openings. Record job details (location, village, villa number, conducted on, prepared by), then check that flashings are continuous and installed before brickwork, adequately secured to the framework, with corners and joints sealed. Confirm weep holes are clear of mortar or debris, brick courses are neat and clean, and all required flashings are complete. Capture notes, photos, and sign-off to meet site quality and code requirements.
by Daniel Mitchell, from the Community
Downloads: 10+
Get
Template
Brickwork and External Insulation QA Checklist
This brickwork and external insulation quality assurance checklist helps contractors verify compliance and workmanship on site. It covers brick type selection, consistent 10 mm mortar beds, correct placement of movement joints with channels and ties, proper brick tie spacing, and use of compressible materials. It also checks Tyvek membrane installation over weather defence boards, rainscreen insulation panels, cavity trays and weep holes, fire barriers, plumb and level courses, cavity voids, and final sign off.
by Sebastian Szabo, from the Community
Downloads: 0
Get

Brickwork Quality Inspection Checklist (Level 1)

Use this Level 1 brickwork quality inspection to confirm setting out to current architectural drawings, check window and door openings for width, height and plumb, and verify coursing, perp joints and permitted tolerances. Inspect movement joints, cavity ties and brick reinforcement, and confirm lintel installation and bearing as specified. Verify Keyfix cavity trays and movement ties, weep vents, and insulation (Rainscreen Duo Slab) fit, spacing and continuity. Check brick tie channels, compression sleeves, and masonry support locations, bolt torque and pull-out testing. Confirm fire and cavity barriers (Siderise) are approved, correctly fixed, sealed and tightly abutted, with non-combustible DPC where required. Optional stonework checks included. Finish with cavity cleanliness, site tidiness, notes and sign-offs for Callan Construction and the principal contractor.

by Aaron Martin, from the Community

Get

Template

Brick and Blockwork Quality Assurance Checklist

Use this Brick and Blockwork Quality Assurance checklist to standardize masonry inspections on site. Capture photos of sample panels, verify setting out, alignment, and joint tolerances, and check brick slips, wall plates, padstones, and fire barriers. Confirm structural openings, cavity closers, lintels including prefabricated, air bricks and ventilation, DPC and cavity trays, weep holes, wall ties, cavity cleaning and insulation, and movement joints. Record mortar mix and color, protect facework, complete housekeeping, and sign off with approvals.

by Dan Bradstock, from the Community

10+

Get

Template

Cavity Flashings Checklist

Use this cavity flashings checklist to verify compliant installation and workmanship around brickwork and framed openings. Record job details (location, village, villa number, conducted on, prepared by), then check that flashings are continuous and installed before brickwork, adequately secured to the framework, with corners and joints sealed. Confirm weep holes are clear of mortar or debris, brick courses are neat and clean, and all required flashings are complete. Capture notes, photos, and sign-off to meet site quality and code requirements.

by Daniel Mitchell, from the Community

10+

Get

Template

Brickwork and External Insulation QA Checklist

This brickwork and external insulation quality assurance checklist helps contractors verify compliance and workmanship on site. It covers brick type selection, consistent 10 mm mortar beds, correct placement of movement joints with channels and ties, proper brick tie spacing, and use of compressible materials. It also checks Tyvek membrane installation over weather defence boards, rainscreen insulation panels, cavity trays and weep holes, fire barriers, plumb and level courses, cavity voids, and final sign off.

by Sebastian Szabo, from the Community

Get

ITP Brick Cavity Flashing Checklist

About author

You might also like

Brickwork Quality Inspection Checklist (Level 1)

Brick and Blockwork Quality Assurance Checklist

Cavity Flashings Checklist

Brickwork and External Insulation QA Checklist

You might also like

Brickwork Quality Inspection Checklist (Level 1)

Brick and Blockwork Quality Assurance Checklist

Cavity Flashings Checklist

Brickwork and External Insulation QA Checklist