Template

Bricklayer QA Inspection Checklist

by Murat Gokce, from the Community

10+

This bricklayer QA inspection checklist supports quality assurance for residential brickwork. It covers site preparation and safety, material selections, damp-proofing (viscourse) placement, wall ties and control joints, cavity cleaning, weep holes, sills, and finishing standards. Use it to verify plumb and level walls, proper spacing, stainless ties in coastal zones, bushfire provisions, and thorough clean-up. Ideal for supervisors and contractors to ensure consistent workmanship and compliance.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Bricklayer Inspection Checklist
This bricklayer inspection checklist helps supervisors and trades verify brick selection, joint profile and color, joint sizing, sills, blending, cavity width and cleanliness, caulking, articulation joints, and overall site safety. Use it to document issues with notes and photos, confirm completion with signatures and dates, and maintain consistent quality and compliance on masonry works.
by Trevor Williamson, from the Community
Downloads: 0
Get
Template
Bricklayer Specification Sheet
This Bricklayer Specification Sheet template helps teams standardize masonry works and document compliance with Australian building standards. Record job details such as document number, job address, and bricklayer name, then verify key requirements including mortar mix ratios to AS 3700, installation of flashings and weep holes at specified centers, articulation joints to engineering plans, and correct sill clearances. Capture quality tolerances for bed and perpend joints, wall plumb and straightness, and ensure consistent blending of bricks across packs. Include steps for dry brushing to remove excess mortar, fixing wall tiles at required centers, and on site housekeeping such as stacking pallets and cleaning edges. Use this checklist to improve workmanship quality, safety, and compliance across bricklaying tasks.
by Nicholas Stodden, from the Community
Downloads: 30+
Get
Template
Brickwork and External Insulation QA Checklist
This brickwork and external insulation quality assurance checklist helps contractors verify compliance and workmanship on site. It covers brick type selection, consistent 10 mm mortar beds, correct placement of movement joints with channels and ties, proper brick tie spacing, and use of compressible materials. It also checks Tyvek membrane installation over weather defence boards, rainscreen insulation panels, cavity trays and weep holes, fire barriers, plumb and level courses, cavity voids, and final sign off.
by Sebastian Szabo, from the Community
Downloads: 0
Get
Template
Brickwork Quality Inspection Checklist (Level 1)
Use this Level 1 brickwork quality inspection to confirm setting out to current architectural drawings, check window and door openings for width, height and plumb, and verify coursing, perp joints and permitted tolerances. Inspect movement joints, cavity ties and brick reinforcement, and confirm lintel installation and bearing as specified. Verify Keyfix cavity trays and movement ties, weep vents, and insulation (Rainscreen Duo Slab) fit, spacing and continuity. Check brick tie channels, compression sleeves, and masonry support locations, bolt torque and pull-out testing. Confirm fire and cavity barriers (Siderise) are approved, correctly fixed, sealed and tightly abutted, with non-combustible DPC where required. Optional stonework checks included. Finish with cavity cleanliness, site tidiness, notes and sign-offs for Callan Construction and the principal contractor.
by Aaron Martin, from the Community
Downloads: 0
Get

Bricklayer Inspection Checklist

This bricklayer inspection checklist helps supervisors and trades verify brick selection, joint profile and color, joint sizing, sills, blending, cavity width and cleanliness, caulking, articulation joints, and overall site safety. Use it to document issues with notes and photos, confirm completion with signatures and dates, and maintain consistent quality and compliance on masonry works.

by Trevor Williamson, from the Community

Get

Template

Bricklayer Specification Sheet

This Bricklayer Specification Sheet template helps teams standardize masonry works and document compliance with Australian building standards. Record job details such as document number, job address, and bricklayer name, then verify key requirements including mortar mix ratios to AS 3700, installation of flashings and weep holes at specified centers, articulation joints to engineering plans, and correct sill clearances. Capture quality tolerances for bed and perpend joints, wall plumb and straightness, and ensure consistent blending of bricks across packs. Include steps for dry brushing to remove excess mortar, fixing wall tiles at required centers, and on site housekeeping such as stacking pallets and cleaning edges. Use this checklist to improve workmanship quality, safety, and compliance across bricklaying tasks.

by Nicholas Stodden, from the Community

30+

Get

Template

Brickwork and External Insulation QA Checklist

This brickwork and external insulation quality assurance checklist helps contractors verify compliance and workmanship on site. It covers brick type selection, consistent 10 mm mortar beds, correct placement of movement joints with channels and ties, proper brick tie spacing, and use of compressible materials. It also checks Tyvek membrane installation over weather defence boards, rainscreen insulation panels, cavity trays and weep holes, fire barriers, plumb and level courses, cavity voids, and final sign off.

by Sebastian Szabo, from the Community

Get

Template

Brickwork Quality Inspection Checklist (Level 1)

Use this Level 1 brickwork quality inspection to confirm setting out to current architectural drawings, check window and door openings for width, height and plumb, and verify coursing, perp joints and permitted tolerances. Inspect movement joints, cavity ties and brick reinforcement, and confirm lintel installation and bearing as specified. Verify Keyfix cavity trays and movement ties, weep vents, and insulation (Rainscreen Duo Slab) fit, spacing and continuity. Check brick tie channels, compression sleeves, and masonry support locations, bolt torque and pull-out testing. Confirm fire and cavity barriers (Siderise) are approved, correctly fixed, sealed and tightly abutted, with non-combustible DPC where required. Optional stonework checks included. Finish with cavity cleanliness, site tidiness, notes and sign-offs for Callan Construction and the principal contractor.

by Aaron Martin, from the Community

Get

Bricklayer QA Inspection Checklist

About author

You might also like

Bricklayer Inspection Checklist

Bricklayer Specification Sheet

Brickwork and External Insulation QA Checklist

Brickwork Quality Inspection Checklist (Level 1)

You might also like

Bricklayer Inspection Checklist

Bricklayer Specification Sheet

Brickwork and External Insulation QA Checklist

Brickwork Quality Inspection Checklist (Level 1)