Template

BMU Inspection Checklist

by Luis Baez, from the Community

10+

Perform a comprehensive Building Maintenance Unit inspection with this checklist. Verify roof car and basket operations, inspect electrical cords and platform condition, confirm PPE use, and ensure loads do not exceed hoist capacity. Validate operator training and certification, and document findings with photos and notes. Use this template to standardize BMU checks, schedule recurring audits, and improve safety for facade access and working at heights.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
BMU Site Set Up and Audit Checklist
This BMU site set up and audit checklist guides facade access teams through safe setup and operation of a Building Maintenance Unit. It covers weather assessment and live edge checks, operator induction, BMU pre‑inspection, kit integrity, and correct tether and restraint setup. It includes SWMS completion, pre‑work hazard checks, daily risk assessment, PPE and harness buddy checks, and photo verification of records. Final checks confirm loose object control, equipment tethering, staff sign off, and establishment of exclusion zones with signage. Do not proceed if faults or moderate or higher risks are identified; escalate to management.
by Luke Lamont, from the Community
Downloads: 20+
Get
Template
Stephensons BMU Pre-Work Checks
Ensure safe facade access and building maintenance with this BMU pre-work checklist from Stephensons. The template guides teams through essential pre-start controls, including confirming permits and RAMS, checking wind speed limits, verifying six-monthly thorough examinations, pre-use harness inspections, and required PPE. It also covers operator training certificates, equipment availability, full function checks, establishing safe work zones with cones and signage, and preparing an effective rescue plan. Includes fields for frequency, work order numbers, and sign-off.
by Stephen Roberts, from the Community
Downloads: 20+
Get
Template
External Building Facade and Common Area Inspection
Perform a structured inspection of external building facades and shared areas to identify hazards, defects, and maintenance needs. This checklist covers pedestrian access and walkways, car parks, boundaries and gates, lighting levels, signage, traffic management, social issues such as vandalism, and vacant unit security. Evaluate facade elements including brickwork, render, cladding, glazing, coping stones, exposed concrete, and roof access and edge protection. Record photos, note issues, and assign corrective actions to streamline property maintenance and keep sites safe and compliant.
by Gareth Youd, from the Community
Downloads: 20+
Get
Template
Cigarette Manufacturing Safety Inspection Checklist
Use this monthly planned safety inspection checklist to assess cigarette manufacturing facilities. Verify correct PPE use and signage; confirm machine safety and guarding, E‑stop awareness, and safe air hose use. Review building safety including eyewash access, illuminated exits, evacuation routes, and emergency lighting. Check walking-working surfaces, stairs, ladders, and guardrails. Confirm fire protection measures, extinguisher access, and no‑smoking controls. Evaluate material handling and lifting equipment, truck and trailer securing, and hoist controls. Inspect electrical safe work practices, panel clearances, cords, and labeling. Ensure hazard communication, SDS access, and proper chemical storage. Validate lockout tagout, hot work permits, housekeeping standards, and documentation with auditor and supervisor sign‑off.
by MC Safety ADMIN, from the Community
Downloads: 0
Get

BMU Site Set Up and Audit Checklist

This BMU site set up and audit checklist guides facade access teams through safe setup and operation of a Building Maintenance Unit. It covers weather assessment and live edge checks, operator induction, BMU pre‑inspection, kit integrity, and correct tether and restraint setup. It includes SWMS completion, pre‑work hazard checks, daily risk assessment, PPE and harness buddy checks, and photo verification of records. Final checks confirm loose object control, equipment tethering, staff sign off, and establishment of exclusion zones with signage. Do not proceed if faults or moderate or higher risks are identified; escalate to management.

by Luke Lamont, from the Community

20+

Get

Template

Stephensons BMU Pre-Work Checks

Ensure safe facade access and building maintenance with this BMU pre-work checklist from Stephensons. The template guides teams through essential pre-start controls, including confirming permits and RAMS, checking wind speed limits, verifying six-monthly thorough examinations, pre-use harness inspections, and required PPE. It also covers operator training certificates, equipment availability, full function checks, establishing safe work zones with cones and signage, and preparing an effective rescue plan. Includes fields for frequency, work order numbers, and sign-off.

by Stephen Roberts, from the Community

20+

Get

Template

External Building Facade and Common Area Inspection

Perform a structured inspection of external building facades and shared areas to identify hazards, defects, and maintenance needs. This checklist covers pedestrian access and walkways, car parks, boundaries and gates, lighting levels, signage, traffic management, social issues such as vandalism, and vacant unit security. Evaluate facade elements including brickwork, render, cladding, glazing, coping stones, exposed concrete, and roof access and edge protection. Record photos, note issues, and assign corrective actions to streamline property maintenance and keep sites safe and compliant.

by Gareth Youd, from the Community

20+

Get

Template

Cigarette Manufacturing Safety Inspection Checklist

Use this monthly planned safety inspection checklist to assess cigarette manufacturing facilities. Verify correct PPE use and signage; confirm machine safety and guarding, E‑stop awareness, and safe air hose use. Review building safety including eyewash access, illuminated exits, evacuation routes, and emergency lighting. Check walking-working surfaces, stairs, ladders, and guardrails. Confirm fire protection measures, extinguisher access, and no‑smoking controls. Evaluate material handling and lifting equipment, truck and trailer securing, and hoist controls. Inspect electrical safe work practices, panel clearances, cords, and labeling. Ensure hazard communication, SDS access, and proper chemical storage. Validate lockout tagout, hot work permits, housekeeping standards, and documentation with auditor and supervisor sign‑off.

by MC Safety ADMIN, from the Community

Get

BMU Inspection Checklist

About author

You might also like

BMU Site Set Up and Audit Checklist

Stephensons BMU Pre-Work Checks

External Building Facade and Common Area Inspection

Cigarette Manufacturing Safety Inspection Checklist

You might also like

BMU Site Set Up and Audit Checklist

Stephensons BMU Pre-Work Checks

External Building Facade and Common Area Inspection

Cigarette Manufacturing Safety Inspection Checklist