Template

Inspection Test Plan (ITP) Template

by Jared Langford, from the Community

80+

This Inspection Test Plan (ITP) template helps electricians and site teams plan and record electrical installation checks in line with AS/NZS 3000. Capture project and site details, equipment identifiers, and verify key tests including visual inspection, earth continuity, insulation resistance, polarity, RCD/earth leakage performance, motor winding resistance, and current draw. Use it to standardize commissioning, document required tools (megger, multimeter, RCD tester, clamp meter), and demonstrate compliance for construction and maintenance activities.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Electrical Inspection and Test Checklist 009
This electrical inspection and test checklist helps verify compliance at project completion. Use it to confirm equipment calibration, MEN link connection, labeling of earth locations and stakes, and MCCB fault protection settings. Document polarity checks, three phase rotation, insulation resistance for mains, submains, switchboards and equipment, and earth continuity and resistance. Record RCD tests and earth fault loop impedance EFLI in line with AS NZS 3000. Attach test reports, capture photos, add notes, and record operator and supervisor sign off before handover.
by Nick Bunnage, from the Community
Downloads: 20+
Get
Template
Electrical Installation Test Record
Capture and certify electrical installation testing with this comprehensive record template. Log install details for domestic or commercial sites, verify RCD protection and smoke alarms, and record emergency lighting and test and tag status. Document switchboard labeling, fire sealing, and earthing and bonding resistance. Complete per-circuit tests including continuity of earth, insulation resistance, fault loop impedance, polarity, visual inspection, and operational checks. Include examiner signature and certification that work meets wiring rules and legislative requirements.
by Jaymon Tunstall, from the Community
Downloads: 0
Get
Template
Electrical Testing Results (AS/NZS 3000)
Use this AS/NZS 3000 electrical testing template to verify new or modified installations. Record visual inspections, earthing and bonding, insulation resistance across mains, sub-mains and final sub-circuits, polarity and phase sequence, loop impedance, RCD operation, supply polarity and neutral integrity. Includes step-by-step preparation, lockout, measurements and compliance fields to capture results and note any non-conformances.
by Bradley Ritchie, from the Community
Downloads: 40+
Get
Template
Electrical Installation Switchboard Test Sheet
Use this electrical installation switchboard test sheet to document visual checks and electrical verification during commissioning and maintenance. Record risk assessment, isolation and lockout, main switchboard condition, earthing and bonding continuity, circuit protection details and RCD trip currents. Capture conductor sizes, insulation resistance, polarity, interconnections, fault loop impedance, and final exit checks. Suitable for domestic, commercial, and industrial sites.
by Jason Lazzarini, from the Community
Downloads: 30+
Get

Electrical Inspection and Test Checklist 009

This electrical inspection and test checklist helps verify compliance at project completion. Use it to confirm equipment calibration, MEN link connection, labeling of earth locations and stakes, and MCCB fault protection settings. Document polarity checks, three phase rotation, insulation resistance for mains, submains, switchboards and equipment, and earth continuity and resistance. Record RCD tests and earth fault loop impedance EFLI in line with AS NZS 3000. Attach test reports, capture photos, add notes, and record operator and supervisor sign off before handover.

by Nick Bunnage, from the Community

20+

Get

Template

Electrical Installation Test Record

Capture and certify electrical installation testing with this comprehensive record template. Log install details for domestic or commercial sites, verify RCD protection and smoke alarms, and record emergency lighting and test and tag status. Document switchboard labeling, fire sealing, and earthing and bonding resistance. Complete per-circuit tests including continuity of earth, insulation resistance, fault loop impedance, polarity, visual inspection, and operational checks. Include examiner signature and certification that work meets wiring rules and legislative requirements.

by Jaymon Tunstall, from the Community

Get

Template

Electrical Testing Results (AS/NZS 3000)

Use this AS/NZS 3000 electrical testing template to verify new or modified installations. Record visual inspections, earthing and bonding, insulation resistance across mains, sub-mains and final sub-circuits, polarity and phase sequence, loop impedance, RCD operation, supply polarity and neutral integrity. Includes step-by-step preparation, lockout, measurements and compliance fields to capture results and note any non-conformances.

by Bradley Ritchie, from the Community

40+

Get

Template

Electrical Installation Switchboard Test Sheet

Use this electrical installation switchboard test sheet to document visual checks and electrical verification during commissioning and maintenance. Record risk assessment, isolation and lockout, main switchboard condition, earthing and bonding continuity, circuit protection details and RCD trip currents. Capture conductor sizes, insulation resistance, polarity, interconnections, fault loop impedance, and final exit checks. Suitable for domestic, commercial, and industrial sites.

by Jason Lazzarini, from the Community

30+

Get

Inspection Test Plan (ITP) Template

About author

You might also like

Electrical Inspection and Test Checklist 009

Electrical Installation Test Record

Electrical Testing Results (AS/NZS 3000)

Electrical Installation Switchboard Test Sheet

You might also like

Electrical Inspection and Test Checklist 009

Electrical Installation Test Record

Electrical Testing Results (AS/NZS 3000)

Electrical Installation Switchboard Test Sheet