Template

IHS Monopole QA Checklist

by Technical SC, from the Community

10+

This IHS Monopole QA checklist supports quality assurance for telecom monopole sites. Inspect the tower access door, locking mechanism, and alignment; confirm required 6mm hole placement near the lock; verify grinding, welding, and treatment steps; and apply cold galvanizing or paint per IHS specifications. Check that shear-off nuts are removed, bolts are flush cut and tack welded, and supplied chains and hardware are installed correctly. Validate LED indicator visibility, lock operation, and site security. Capture an overall site video, document ABLOY lock screenshots, and record the return of any existing locks. Use this form to log issues, attach evidence, and ensure standards compliance across installations.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
IHS Monopole QA Checklist ver 1.1
Use this IHS Monopole QA ver 1.1 checklist to verify telecom monopole site security and workmanship. Inspect tower access doors, lock installability and alignment, welds and grinding, paint treatment to IHS specifications, cold galvanizing of affected areas, drilling and treatment of security holes, proper chain and hardware fixation, removal of shear-off nuts, flush cutting and tack welding, and LED checks. Capture required photos and video, confirm Abloy locks and site are secured, and document gate status and any existing locks returned to the custodian.
by Technical SC, from the Community
Downloads: 10+
Get
Template
Monopole Structural Inspection Report
This Monopole Structural Inspection Report template helps telecom teams document the condition of monopole towers and associated equipment. Capture site details, tower configuration and height, section diameters, and aircraft warning lights. Assess concrete base, grouting, hold‑down bolts, base flange and gussets, and conduct non‑destructive examinations. Verify safety components including ladders, platforms, toe boards, handrails, and fall‑arrest systems. Record RF cabling, antenna structures, tenant containers, fencing, locks, and other findings. Include directional tower views and before/after site photos to support maintenance actions.
by Jacques Roux, from the Community
Downloads: 0
Get
Template
QC Inspection for Neocom Mast Sites
Use this QC inspection checklist for Neocom/Mast telecom sites to validate installation quality and site readiness. Verify gate alignment, match Lock ID stickers to lock bodies, confirm lock orientation and LED visibility, and check casing gaps between 5-9 mm with measurements and photos. Ensure shear-off nuts are removed, bolts are flush, and the shackle operates smoothly. Record functional tests of the lock button and site security status with iCrypto confirmation. Document debris removal and install signage correctly using screws or silicone at 1600 mm height or as required for rooftop sites. Capture videos, add notes, and mark pass or fail with reasons.
by Smithchristian 007, from the Community
Downloads: 0
Get
Template
Neocom QC Inspection Checklist Revision 2
This Neocom QC inspection checklist guides field teams through validating lock installations and site security at telecom facilities. It covers gate alignment, confirming locks are level, verifying casing gaps between 5 mm and 9 mm, and checking correct lock orientation with visible LEDs. Inspect welding quality, clean and treat the heat affected zone, and ensure shear-off nuts are removed or flush cut and tack welded. Confirm shackle movement, remove debris, document with photos, videos, and measurements, record pass or fail, verify the site is locked with WorkWide confirmation, and return old locks to the Neocom office.
by Technical SC, from the Community
Downloads: 0
Get

IHS Monopole QA Checklist

About author

You might also like

IHS Monopole QA Checklist ver 1.1

Monopole Structural Inspection Report

QC Inspection for Neocom Mast Sites

Neocom QC Inspection Checklist Revision 2

You might also like

IHS Monopole QA Checklist ver 1.1

Monopole Structural Inspection Report

QC Inspection for Neocom Mast Sites

Neocom QC Inspection Checklist Revision 2