Template

Preventive Maintenance: Hydraulic Actuator Gate (Annual)

by Botha CG, from the Community

This annual preventive maintenance checklist (Code: HY12AN) guides technicians through servicing Delta hydraulic actuator gate systems. It covers required tools and materials, site safety, and lockout/tagout, then details step-by-step procedures: inspecting control functions and limit switches; checking hoses and fittings for wear and leaks; servicing the hydraulic power unit, including draining and flushing the reservoir, replacing filters, and refilling with clean oil; verifying accumulator pressure and relief valve settings; inspecting electrical connections; cleaning and lubricating motors; measuring current; cleaning the HPU; and cycling the barrier to confirm smooth operation. Record results in the maintenance log.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Hydraulic Actuator Gate PM Checklist (Delta) Quarterly
This quarterly preventive maintenance checklist covers Delta-brand hydraulic actuator gate systems used for vehicle barrier/access control. It guides technicians through required tools and safety steps (lockout/tagout, pressure bleed), inspection of the hydraulic power unit, hoses and fittings, pump motor and coupling, suction strainer, and spin-on filter replacement. It includes accumulator pressure checks and nitrogen recharge, hydraulic fluid level adjustment, and operational tests from the slave control panel to confirm smooth raise and lower cycles. Use it to document maintenance hours and findings and keep barriers operating reliably and safely.
by Botha CG, from the Community
Downloads: 0
Get
Template
USMS Delta Wedge Preventative Maintenance
This preventive maintenance checklist guides technicians through servicing USMS Delta Wedge vehicle barriers. It covers safe lockout procedures, control function checks, raise and lower cycle verification, and securing the barrier. Steps include bleeding down the hydraulic system, inspecting cylinders for internal leaks, checking clevis pins and bearings, clearing debris from the foundation and drains, tightening top plate bolts to specified torque, and assessing paint and reflective tape. The checklist also directs replacement of oil filters, inspection of hydraulic hoses, accumulator pressure checks, starter overload tests, heater operation verification, relief valve adjustment to 2200 psig, and thorough HPU cleaning and oil top-up. Final sections capture electronic signatures for end-user and representative sign-off.
by Larry Rojas, from the Community
Downloads: 10+
Get
Template
Annual Window AC Preventive Maintenance Checklist
This annual preventive maintenance checklist helps facilities and maintenance teams service window air conditioning units safely and effectively. It covers required tools and materials, personal protective equipment, and safety guidelines including lockout tagout and manufacturer instructions. Step-by-step procedures include inspecting and straightening fins, cleaning interior parts, adjusting the fresh air damper, changing filters, lubricating bearings, checking gaskets and caulking, detecting refrigerant leaks, starting and observing operation, verifying temperature differential, confirming proper electrical grounding, and documenting maintenance hours and results.
by Botha CG, from the Community
Downloads: 0
Get
Template
Vehicle Barrier Preventive Maintenance Checklist
Use this quarterly preventive maintenance checklist to service vehicle barriers and gate systems. It covers safety guidelines, lockout and tagout, visual inspections for damage, greasing fittings, checking welding and piping, inspecting pistons and hydraulic cylinders, cleaning the barrier pit, testing sump pump operation, assessing finish and corrosion, and verifying safety devices, traffic lights, and loops. Record loop resistance with a multimeter and document maintenance hours and work order details. Suggested tools include mechanic sets, grease gun, coatings, and cleaning materials.
by Botha CG, from the Community
Downloads: 0
Get

Preventive Maintenance: Hydraulic Actuator Gate (Annual)

About author

You might also like

Hydraulic Actuator Gate PM Checklist (Delta) Quarterly

USMS Delta Wedge Preventative Maintenance

Annual Window AC Preventive Maintenance Checklist

Vehicle Barrier Preventive Maintenance Checklist

You might also like

Hydraulic Actuator Gate PM Checklist (Delta) Quarterly

USMS Delta Wedge Preventative Maintenance

Annual Window AC Preventive Maintenance Checklist

Vehicle Barrier Preventive Maintenance Checklist