Template

Masjid Electrical Safety Check

by Sunni Waqf Directorate, from the Community

10+

Conduct routine electrical inspections for your masjid with this checklist. Verify MCCB current ratings, panel distribution boards, and DB drawings. Capture notes and media, record site, personnel, and time details, and flag issues for maintenance and compliance.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template
Electrical DB Preventive Maintenance Checklist
This checklist helps teams perform preventive maintenance on electrical distribution boards. It guides users to verify breaker labeling, assess wire and cable condition, check for signs of overheating, confirm that connections are secure, log inspection frequency, record the date of the last service, and attach photos of the DB interior. Use it to standardize inspections, reduce risk, and maintain safe, reliable power distribution across facilities.
by Renante Bugarin, from the Community
Downloads: 0
Get
Template
Sole Electrical Services Ltd DB Inspection Checklist
This checklist supports distribution board inspections for Sole Electrical Services Ltd and similar electrical contractors. Record site and location details, note DB references and condition, test RCDs, assess internal condition, verify terminals are tightened to manufacturer torque settings, and document any issues. Add photos and comments, capture inspector and date, and assign corrective actions to close out defects and improve electrical safety and compliance.
by Neil Glindon, from the Community
Downloads: 0
Get
Template
Distribution Boards 6-Month Inspection Checklist
This electrical maintenance checklist supports 6-month inspections of distribution boards in line with BS7671 18th Edition and SFG20 44-07. It covers MCCB and MCB board condition, busbar assemblies, air break switches and fuse boards, cable insulation and terminations, circuit charts, conduit and cable glands, distribution board casings, earth fault loop impedance, fuse carriers, RCD testing, and integrity and thermal checks. Use it to document findings, add comments and conclusions, and capture signatures to maintain building electrical safety and compliance.
by Brendan Mulholland, from the Community
Downloads: 10+
Get
Template
Gamble Group Health and Safety Site Inspection
Use this practical template to perform comprehensive health and safety site inspections for construction projects. Capture client and site details, confirm construction phase plans and pre‑construction information, verify RAMS are present and followed, and check training and staff conduct. Review emergency arrangements, first aid and fire equipment, site access and security, lighting, and welfare provisions including toilets, water, and hygiene. Assess working at height controls, scaffolds, rescue plans, and lifting operations. Inspect plant, tools, and legal documents, safe use and storage, and reporting of damage. Verify electrical isolations and drawings, and controls for manual handling, vibration, dust, and noise. Check housekeeping, waste management, COSHH storage, and PPE suitability and use. Record comments, add media, and capture assessor signature to complete the inspection.
by Philip Gamble, from the Community
Downloads: 0
Get

Electrical DB Preventive Maintenance Checklist

This checklist helps teams perform preventive maintenance on electrical distribution boards. It guides users to verify breaker labeling, assess wire and cable condition, check for signs of overheating, confirm that connections are secure, log inspection frequency, record the date of the last service, and attach photos of the DB interior. Use it to standardize inspections, reduce risk, and maintain safe, reliable power distribution across facilities.

by Renante Bugarin, from the Community

Get

Template

Sole Electrical Services Ltd DB Inspection Checklist

This checklist supports distribution board inspections for Sole Electrical Services Ltd and similar electrical contractors. Record site and location details, note DB references and condition, test RCDs, assess internal condition, verify terminals are tightened to manufacturer torque settings, and document any issues. Add photos and comments, capture inspector and date, and assign corrective actions to close out defects and improve electrical safety and compliance.

by Neil Glindon, from the Community

Get

Template

Distribution Boards 6-Month Inspection Checklist

This electrical maintenance checklist supports 6-month inspections of distribution boards in line with BS7671 18th Edition and SFG20 44-07. It covers MCCB and MCB board condition, busbar assemblies, air break switches and fuse boards, cable insulation and terminations, circuit charts, conduit and cable glands, distribution board casings, earth fault loop impedance, fuse carriers, RCD testing, and integrity and thermal checks. Use it to document findings, add comments and conclusions, and capture signatures to maintain building electrical safety and compliance.

by Brendan Mulholland, from the Community

10+

Get

Template

Gamble Group Health and Safety Site Inspection

Use this practical template to perform comprehensive health and safety site inspections for construction projects. Capture client and site details, confirm construction phase plans and pre‑construction information, verify RAMS are present and followed, and check training and staff conduct. Review emergency arrangements, first aid and fire equipment, site access and security, lighting, and welfare provisions including toilets, water, and hygiene. Assess working at height controls, scaffolds, rescue plans, and lifting operations. Inspect plant, tools, and legal documents, safe use and storage, and reporting of damage. Verify electrical isolations and drawings, and controls for manual handling, vibration, dust, and noise. Check housekeeping, waste management, COSHH storage, and PPE suitability and use. Record comments, add media, and capture assessor signature to complete the inspection.

by Philip Gamble, from the Community

Get

Masjid Electrical Safety Check

About author

You might also like

Electrical DB Preventive Maintenance Checklist

Sole Electrical Services Ltd DB Inspection Checklist

Distribution Boards 6-Month Inspection Checklist

Gamble Group Health and Safety Site Inspection

You might also like

Electrical DB Preventive Maintenance Checklist

Sole Electrical Services Ltd DB Inspection Checklist

Distribution Boards 6-Month Inspection Checklist

Gamble Group Health and Safety Site Inspection