Template

Emergency Light Inspection and Test

by Darren Glover, from the Community

Use this emergency light inspection and test checklist to verify unit condition and placement, confirm charging LEDs are operating, and ensure lights illuminate for the rated time during a power down. Capture the percentage of lights under test, note the location of any failed units, assess overall condition, and record the next inspection due date. Document the inspector name and any issues found to support ongoing compliance and maintenance across your facility.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Exit Light Safety Inspection
Use this exit light safety inspection checklist to verify that emergency exit lights and signs are visible, illuminated, and code compliant. Record the location and condition of each unit, check lens and housing integrity, confirm illumination, and test the battery and charging indicator using the test button. Validate backup power duration, ensure signage is clearly visible and unobstructed, and confirm arrows and directions are correct. Note serial numbers, maintenance history, and any defects. Capture photos, assign corrective actions, and document retests to maintain a reliable egress path during emergencies.
by Vincent Wilson, from the Community
Downloads: 0
Get
Template
Emergency Lighting Log and Test Sheet
An emergency lighting log and test sheet template is used to document all test results during inspections. Perform the following key steps when completing the form: 1) Identify the device to be evaluated 2) Record the type of test to be performed 3) Evaluate the physical condition of the equipment 4) Take photo evidence of defects and damages found 5) Identify load test result and refer failed tests to the appropriate persons 6) Validate records of inspection with a digital signature and timestamp
by SafetyCulture
Downloads: 900+
Get
Template
Exit and Emergency Light Inspection
Use this exit and emergency light inspection checklist to verify that exit signs and emergency lighting are working and compliant. Capture location, date, and inspector details; record asset and light type, including exit lights, spot lights, twin flood units, and LED battens; attach photos; log defects and corrective actions to maintain building safety.
by Brodie Ralston, from the Community
Downloads: 0
Get
Template
Emergency Lighting and Exit Sign Inspection Checklist
An emergency lighting and exit sign inspection checklist is used to ensure emergency lights are in good working condition. This template can be used by maintenance teams to document and report any defects identified. The template has been built to guide the inspector to perform the following: 1) Evaluate the physical condition of equipment, battery, and luminous 2) Take photo evidence and detailed notes of any defects found 3) Record the action needs and sent in-app notification to the relevant contact 4) Document overall assessment and recommendations 5) End inspection with a digital signature and timestamp to validate record of inspection
by SafetyCulture
Downloads: 3,000+
Get

Exit Light Safety Inspection

Use this exit light safety inspection checklist to verify that emergency exit lights and signs are visible, illuminated, and code compliant. Record the location and condition of each unit, check lens and housing integrity, confirm illumination, and test the battery and charging indicator using the test button. Validate backup power duration, ensure signage is clearly visible and unobstructed, and confirm arrows and directions are correct. Note serial numbers, maintenance history, and any defects. Capture photos, assign corrective actions, and document retests to maintain a reliable egress path during emergencies.

by Vincent Wilson, from the Community

Get

Template

Emergency Lighting Log and Test Sheet

An emergency lighting log and test sheet template is used to document all test results during inspections. Perform the following key steps when completing the form: 1) Identify the device to be evaluated 2) Record the type of test to be performed 3) Evaluate the physical condition of the equipment 4) Take photo evidence of defects and damages found 5) Identify load test result and refer failed tests to the appropriate persons 6) Validate records of inspection with a digital signature and timestamp

by SafetyCulture

900+

Get

Template

Exit and Emergency Light Inspection

Use this exit and emergency light inspection checklist to verify that exit signs and emergency lighting are working and compliant. Capture location, date, and inspector details; record asset and light type, including exit lights, spot lights, twin flood units, and LED battens; attach photos; log defects and corrective actions to maintain building safety.

by Brodie Ralston, from the Community

Get

Emergency Lighting and Exit Sign Inspection Checklist

Template

Emergency Lighting and Exit Sign Inspection Checklist

An emergency lighting and exit sign inspection checklist is used to ensure emergency lights are in good working condition. This template can be used by maintenance teams to document and report any defects identified. The template has been built to guide the inspector to perform the following: 1) Evaluate the physical condition of equipment, battery, and luminous 2) Take photo evidence and detailed notes of any defects found 3) Record the action needs and sent in-app notification to the relevant contact 4) Document overall assessment and recommendations 5) End inspection with a digital signature and timestamp to validate record of inspection

by SafetyCulture

3,000+

Get

Emergency Light Inspection and Test

About author

You might also like

Exit Light Safety Inspection

Emergency Lighting Log and Test Sheet

Exit and Emergency Light Inspection

Emergency Lighting and Exit Sign Inspection Checklist

You might also like

Exit Light Safety Inspection

Emergency Lighting Log and Test Sheet

Exit and Emergency Light Inspection

Emergency Lighting and Exit Sign Inspection Checklist