Template

JCC Rock Bolt Installation Checklist

by Zawar Geotech, from the Community

10+

This JCC rock bolt installation checklist helps crews perform safe underground ground support. It covers pre-drilling checks, PPE, face scaling, jumbo positioning, drill bit and SSR spacing, drilling to specified bolt lengths, and grouting with resin. Steps include verifying resin capsule expiry, using insertion tubes, churning and holding time, securing bearing plates, breaking shear pins, and installing bolts to the required distance from the face. Use it to document SOP compliance, worker competency, and site details.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Face Development Checklist for Underground Mines
This face development checklist supports underground mining crews and supervisors to verify critical controls before, during, and after drilling and charging. It covers gas monitoring and ventilation, water spraying, loose rock dressing and scaling, mucking after scaling, equipment availability, and resin capsule condition and expiry. It also includes face drilling setup, hole length checks and cleaning, line hole drilling, correct stemming, delay sequence, and leaving line holes uncharged where required. Guidance notes reinforce safe sequences for drilling and charging and proper misfire assessment and handling in line with site procedures and standards. Use this template to improve consistency, reduce misfire risk, and maintain a safe face profile.
by SHAILENDRA DELWAL, from the Community
Downloads: 0
Get
Template
Geotechnical and Mining Observation Sheet
This geotechnical and mining observation sheet helps teams document ground conditions and support in mines or similar excavations. Capture the number and orientation of joint sets, joint spacing, persistence, and roughness. Record distance of rock bolts from the face, drive axis orientation relative to major foliation or joint sets, drive size or section, and the standard bolting pattern with any gaps. Note rock bolt length, grouting, bearing plates and tensioning, and assess scaling quality. Identify loose rock and size, cable bolting, presence and quality of wire mesh, socket plugs, and any loose bars or bottom holes. Verify compliance with specified support requirements, grouting quality, and document any modifications to the support pattern with detailed remarks and conclusions.
by SHAILENDRA DELWAL, from the Community
Downloads: 10+
Get
Template
POSHS JCC Format Checklist
This POSHS JCC format is a structured checklist for job cycle checks on the shop floor. It captures JCC details such as date, department, location, duration, and participants, along with SOP availability and display, PPE adequacy and usage, tool and equipment condition, housekeeping and upkeep, and observations of unsafe and safe acts. It guides evaluators to note hazards, unsafe work practices, and other observations, and to record operator learnings, the person who conducted the JCC, and approval. Use it to boost SOP compliance, safety training, and operational safety in manufacturing environments.
by SANDIP DEOKAR, from the Community
Downloads: 0
Get
Template
Bolt Trace Record
This bolt trace record template helps site teams document full bolt traceability for structural connections. Record installer name, manufacturer, grade, size, batch and packaging certificate photos, plus connection type and supporting photos. Verify correct bolt type, length, head markings, alignment, and washer use, then capture inspector name, date, and signature for compliance sign-off. Ideal for construction QA and steelwork documentation.
by Bede O'Rourke, from the Community
Downloads: 10+
Get

JCC Rock Bolt Installation Checklist

About author

You might also like

Face Development Checklist for Underground Mines

Geotechnical and Mining Observation Sheet

POSHS JCC Format Checklist

Bolt Trace Record

You might also like

Face Development Checklist for Underground Mines

Geotechnical and Mining Observation Sheet

POSHS JCC Format Checklist

Bolt Trace Record