Template

Haul and Pit Facilities Workplace Inspection

by Dan Rayner, from the Community

10+

Use this mining checklist to assess haul and access roads, pit crib rooms, and related facilities for safety and compliance. Verify clear walkways, emergency access and exits, fire protection, signage, lighting, and drainage. Review hazardous chemical storage and documentation, first aid readiness, spill response, and housekeeping. Check haul road standards, delineators, and traffic management controls. Record hazards, note items that cannot be fixed immediately, assign actions to the responsible team, and follow up to closure.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Standard 18 Haul Roads and Edge Protection Checklist
Use this Standard 18 monthly inspection form to assess the safety of quarry haul roads and edge protection. Verify stability of faces above and below haul routes, road width, potholes and obstructions, containment bunds, and drainage to prevent ponding. Note new excavations, tips or lagoons near haul roads, and any hazards affecting users. Check for 1.5 m edge protection and adequacy of temporary protection during soil movements. Record concerns, defects requiring geotechnical notification, recommended remedial actions, and sign off.
by Marfield Quarry19, from the Community
Downloads: 10+
Get
Template
Port Administration Workplace Inspection Checklist
This Port Administration Workplace Inspection Checklist helps supervisors and safety teams review port office and facility conditions for compliance and risk control. It covers access and egress, emergency equipment and evacuation details, fire prevention and extinguishers, first aid readiness, office amenities and lighting, building walkways and drainage, electrical safety and RCDs, housekeeping and spill kits, manual handling and storage, hazardous chemicals and SDS management, fleet and vehicle checks, signage, and environmental controls. Findings that cannot be fixed now should be escalated for action tracking and sent to the accountable manager and the health, safety, and training team for follow up.
by Dan Rayner, from the Community
Downloads: 0
Get
Template
Open Pit Mining Workplace Inspection Checklist
This open pit mining workplace inspection checklist helps teams verify safe, compliant operations across pits, ROM stockpiles, waste dumps, and haul roads. It guides checks on access control, road condition, camber and super-elevation, windrows and bunds, delineation, lighting, dust suppression, signage, and restricted areas. Inspectors confirm pit wall stability, batter angles, bench access, floor levels and gradients, pumping and water management to sumps, and communications or two-way network status. It also covers PPE use, incident and hazard reporting, facility cleanliness, fuel and go-line conditions, and crew readiness before work begins.
by Belinda Van der Merwe, from the Community
Downloads: 10+
Get
Template
General Open Pit Inspection Checklist
This general open pit inspection checklist helps mining supervisors and technical staff verify pit safety and compliance at key times, including the start of each shift, after blasting, and following major rain. It covers pit walls and berms, drill and blast controls, floors and hazardous areas, dumps and stockpiles, roads and ramps, signage, traffic management, drainage, windrows, and go-line conditions. Use it to identify hazards, confirm design compliance, and document corrective actions for safer open pit operations.
by Gregory Turner, from the Community
Downloads: 30+
Get

Haul and Pit Facilities Workplace Inspection

About author

You might also like

Standard 18 Haul Roads and Edge Protection Checklist

Port Administration Workplace Inspection Checklist

Open Pit Mining Workplace Inspection Checklist

General Open Pit Inspection Checklist

You might also like

Standard 18 Haul Roads and Edge Protection Checklist

Port Administration Workplace Inspection Checklist

Open Pit Mining Workplace Inspection Checklist

General Open Pit Inspection Checklist