Template

X-Ray FAT Checklist

by Nehemiah White, from the Community

This X-Ray Factory Acceptance Test checklist helps validate equipment before shipment. Verify model and serial labeling, required line items and accessories, sanitary design features, and safety devices including magnetic interlocks. Confirm OPC UA and I O units, RJ-IF connections, and infeed guides. Check radiation safety compliance, test pieces from 0.7 mm to 1.5 mm stainless steel, and document the machine setup with photos. Record SOP demonstrations, note follow up actions, and determine equipment readiness for dispatch.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
X-Ray and Microwave Radiation Testing Checklist
Use this practical checklist to assess X-ray and microwave radiation equipment in food and manufacturing facilities. It guides teams to confirm safety signage and control panel warnings, inspect lead protective devices, verify completion of annual physics surveys, ensure the Radiation Safety Manual is accessible, and record infeed and outfeed readings for multiple assets. Includes approval fields and timestamps to support compliance and audit readiness.
by Jose Moreno, from the Community
Downloads: 0
Get
Template
F00145-A X-Ray Record
This X-Ray Record template supports hourly verification of metal and foreign-object detection on food production lines. Record product details, best-before date, test times, and results for stainless 316 1mm, aluminum 8mm, glass 6mm, ceramic 8mm, wire 2mm, and rubber ball 3mm. Log operator initials and QA checks, isolate rejected product, recheck once, and document root cause if failures occur.
by Charik Urencio, from the Community
Downloads: 0
Get
Template
Radiation Protection and X-Ray Audit Checklist
This radiation protection audit checklist supports compliance with IRR17 and best practice across X-ray facilities. It covers site details, designation of controlled areas, shielding and door interlocks, exposure controls, PPE and personal monitoring, local rules and signage, warning lights and pregnancy notices, electro-mechanical safety of generators and stands, image processing and cassette hygiene, radiographic practice and record keeping, and equipment performance tests including kV, mAs, HVL, repeatability and dose. Use it to document findings, actions and improve safety.
by Niall Monaghan, from the Community
Downloads: 0
Get
Template
Factory Acceptance Test (FAT) Form
This Factory Acceptance Test (FAT) form helps manufacturers and suppliers verify equipment completeness, safety, and performance before shipment. The checklist covers machine suitability, general appearance, electrical and mechanical compliance, guarding and interlocks, signage and labeling, dry runs, full-speed trials, and recovery from power failure. It also includes PUWER and CE considerations, HMI language settings, E-stop tests, and documentation requirements such as schematics, manuals, and backups. Use this template to standardize FAT procedures and ensure readiness for commissioning.
by Paul Scourfield, from the Community
Downloads: 30+
Get

X-Ray and Microwave Radiation Testing Checklist

Use this practical checklist to assess X-ray and microwave radiation equipment in food and manufacturing facilities. It guides teams to confirm safety signage and control panel warnings, inspect lead protective devices, verify completion of annual physics surveys, ensure the Radiation Safety Manual is accessible, and record infeed and outfeed readings for multiple assets. Includes approval fields and timestamps to support compliance and audit readiness.

by Jose Moreno, from the Community

Get

Template

F00145-A X-Ray Record

This X-Ray Record template supports hourly verification of metal and foreign-object detection on food production lines. Record product details, best-before date, test times, and results for stainless 316 1mm, aluminum 8mm, glass 6mm, ceramic 8mm, wire 2mm, and rubber ball 3mm. Log operator initials and QA checks, isolate rejected product, recheck once, and document root cause if failures occur.

by Charik Urencio, from the Community

Get

Template

Radiation Protection and X-Ray Audit Checklist

This radiation protection audit checklist supports compliance with IRR17 and best practice across X-ray facilities. It covers site details, designation of controlled areas, shielding and door interlocks, exposure controls, PPE and personal monitoring, local rules and signage, warning lights and pregnancy notices, electro-mechanical safety of generators and stands, image processing and cassette hygiene, radiographic practice and record keeping, and equipment performance tests including kV, mAs, HVL, repeatability and dose. Use it to document findings, actions and improve safety.

by Niall Monaghan, from the Community

Get

Template

Factory Acceptance Test (FAT) Form

This Factory Acceptance Test (FAT) form helps manufacturers and suppliers verify equipment completeness, safety, and performance before shipment. The checklist covers machine suitability, general appearance, electrical and mechanical compliance, guarding and interlocks, signage and labeling, dry runs, full-speed trials, and recovery from power failure. It also includes PUWER and CE considerations, HMI language settings, E-stop tests, and documentation requirements such as schematics, manuals, and backups. Use this template to standardize FAT procedures and ensure readiness for commissioning.

by Paul Scourfield, from the Community

30+

Get

X-Ray FAT Checklist

About author

You might also like

X-Ray and Microwave Radiation Testing Checklist

F00145-A X-Ray Record

Radiation Protection and X-Ray Audit Checklist

Factory Acceptance Test (FAT) Form

You might also like

X-Ray and Microwave Radiation Testing Checklist

F00145-A X-Ray Record

Radiation Protection and X-Ray Audit Checklist

Factory Acceptance Test (FAT) Form