Template

FSP Inspection Checklist

by Jonathan Nguyen, from the Community

This FSP inspection checklist helps assess the condition and fire safety of EPS panel installations across ceilings, walls, doors, and floor junctions. Inspect seals, corrosion, sagging, buckling, wall intersections, and penetrations; verify pressure relief ports and door hardware. Review storage and housekeeping controls by distancing combustibles from EPS panels and maintaining damage-free surfaces. Check ignition controls, including safe locations for forklift battery charging and proper storage of flammable liquids and gases. Capture comments and sign off to document compliance and corrective actions.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

Manufacturing Facility Inspection Checklist

This manufacturing facility inspection checklist helps teams assess safety, compliance, and housekeeping across the shop floor. Review evacuation and safety signage, fire exits and extinguishers, eyewash stations, risk assessments, and permit-to-work controls. Verify PPE provision and use, LEV performance, handling of highly flammable liquids, chemical labeling and storage, and tool condition. Inspect lifting equipment, machine guarding, waste segregation and collection, walkways, storage areas, and noticeboards. Evaluate cleanliness of floors, benches, sinks, walls and shelves, lighting, insulation lagging, and overall building condition. Capture findings, note corrective actions, and sign off the inspection.

by Liam Scott, from the Community

10+

Get

Template

EPS Store Audit Checklist

Use this EPS Store Audit checklist to evaluate every area of a retail store, including exterior and signage, storefront and shop floor, refrigeration cabinets and freezers, produce displays, butchery, bakery and deli sections, bulk store and receiving bay, electrical and DB boards, plant rooms and water treatment, generators, and fire systems. Verify temperatures for cold rooms and freezers, equipment condition, cleanliness, safety, and compliance. Capture photos, note defects, and document manager sign-off to maintain standards and reduce downtime.

by David Taylor, from the Community

10+

Get

Template

Warehouse Safety Inspection Checklist

This warehouse safety inspection checklist helps teams assess the condition of work areas, lighting, floors and aisles, and the stability of stored materials. It covers emergency readiness including evacuation routes, unobstructed exits, and functional emergency and exit lights. Fire protection checks include extinguisher placement and charge status, and first aid kit accessibility. Electrical safety items address cord condition, extension cord use, covered boxes, and labeled panels. Material handling sections verify licensed operators, forklift seatbelt use, daily inspections, and eyewash availability near battery charging. PPE and behavior checks include gloves, high-visibility apparel, and safety boots when outside marked walkways. It also reviews controls for ignition sources, proper storage of flammable liquids, chemical labeling, and safe propane cylinder storage. Includes guidance to document deficiencies and assign corrective actions.

by Trevor Reschny, from the Community

20+

Get

Template

Weekly Construction Health and Safety Checklist

Use this weekly construction health and safety checklist to inspect housekeeping and welfare facilities, verify PPE use, confirm first aid supplies and eyewash, and review fire prevention measures. Check scaffolding tags, guardrails, and tower erection by competent persons; assess hand and power tools, PAT testing, and extension leads. Record inspections of site plant and temporary lighting, review materials storage and labeling of flammable gases and liquids, and evaluate traffic management and pedestrian segregation. Inspect excavations for shoring, battering, access and egress, fenced barriers, and stop blocks. Verify controls for working at heights and fragile surfaces to keep sites safe and compliant.

by Allan Harridine, from the Community

10+

Get

Template

Surface Stores Inspection

This Surface Stores Inspection checklist helps mining teams assess the safety and compliance of surface store areas and laydown zones. It covers aisle access and housekeeping, ventilation, floor conditions, exits and egress, waste segregation and disposal, lighting and emergency lighting, and fire protection requirements. The form also checks first aid stations and eyewash, electrical fixtures and tagging, posted emergency instructions, and safe storage of flammable liquids and gases. Inspectors verify signage, chemical labeling and SDS availability, PPE and fall protection storage, and safe stacking and storage practices across store sheds and laydown areas.

by Benjamin Andrews, from the Community

Get

Template

Health and Safety Inspection V2

This Health and Safety Inspection V2 checklist helps teams assess workplace compliance across key areas: employer documentation and recordkeeping; chemical storage and COSHH controls; first aid readiness and incident reporting; fire protection and evacuation; PPE selection, training, and issue; general housekeeping and lighting; walkways and egress; ladders, tools, and equipment; portable power tools and PAT; environmental controls including ventilation, noise, temperature, and sanitation; flammable and combustible materials; hazardous chemical exposure; electrical safety; noise protection; and cleaning of equipment and clothing. Use it to identify hazards, verify training and signage, confirm storage and labeling practices, and document corrective actions before sign-off.

by M Gillman, from the Community

Get

FSP Inspection Checklist

About author

You might also like

Manufacturing Facility Inspection Checklist

EPS Store Audit Checklist

Warehouse Safety Inspection Checklist

Weekly Construction Health and Safety Checklist

Surface Stores Inspection

Health and Safety Inspection V2

You might also like

Manufacturing Facility Inspection Checklist

EPS Store Audit Checklist

Warehouse Safety Inspection Checklist

Weekly Construction Health and Safety Checklist

Surface Stores Inspection

Health and Safety Inspection V2